Citation:
R. Moore, J. Quarmby and T. Stephenson. Development of a novellightweight media for Biological Aerated Filters (BAFS). 3rd International Meeting On Biological Aerated Filters (BAF3) - 3 March 1999, Cranfield University, UK
Abstract:
Clay has been foamed and extruded using novel technology, to produce a lightweight media
called StarLight C. Altering the production process parameters allows control of the media
diameter, density, strength, and surface roughness. In its application as a Biological Aerated
Filter (BAF) media, a low density may be advantageous since this will reduce the minimum
fluidisation velocity (Vmf) of the media. Consequently a lower liquid velocity will be required
during filter backwashing, which could reduce the operating costs and increase the productivity
of the reactor.
This paper reports the performance of StarLight C and standard expanded clay (media A) as
media in pilot scale BAFs treating settled sewage with hydraulic residence times between 58 and
96 minutes. The BAFs were backwashed every 24 hours at a liquid flow rate corresponding to
40% of the Vmf of the media. The BAF using StarLight C required approximately half the
volume of backwash water needed by the BAF filled with media A.
To optimise the performance of BAFs further the filter run time should be maximised. This
requires the media size and voidage to be maximised without compromising filtration efficiency.
