CERES Home
→
Browsing by Author

Browsing by Author "Zhang, Tao"

Now showing items 1-11 of 11

A calibration method of USBL installation error based on attitude determination

Zhu, Yongyun; Zhang, Tao; Xu, Shouquan; Shin, Hyo-Sang; Li, Peijuan; Jin, Bonan; Zhang, Liang; Weng, Chengcheng (IEEE, 2020-05-18)

The Ultra-short baseline (USBL) positioning system has important application in the positioning of underwater vehicles. The installation error angle of the USBL positioning system has an important influence on the positioning ...
Comparative analysis of cold and warm rolling on tensile properties and microstructure of additive manufactured Inconel 718

Zhang, Tao; Li, Huigui; Gong, Hai; Wu, Yunxin; Ahmad, Abdulrahaman Shuaibu; Chen, Xin; Zhang, Xiaoyong (Springer, 2022-01-14)

Despite the high efficiency and low cost of wire + arc additive manufacture (WAAM), the epitaxial grown columnar dendrites of WAAM deposited Inconel 718 cause inferior properties and severe anisotropy compared to the wrought ...
Effect of rolling force on tensile properties of additively manufactured Inconel 718 at ambient and elevated temperatures

Zhang, Tao; Li, Huigui; Gong, Hai; Wu, Yunxin; Ahmad, Abdulrahaman Shuaibu; Chen, Xin (Elsevier, 2021-07-03)

Inferior mechanical properties and severe anisotropy behavior of wire + arc additive manufactured (WAAM) Inconel 718 due to the large epitaxial grown columnar dendrites restrict the industrial application of WAAM deposition. ...
An efficient constrained weighted least squares method with bias reduction for TDOA-based localization

Zhang, Liang; Zhang, Tao; Shin, Hyo-Sang (IEEE, 2021-02-05)

This paper addresses the source location problem by using time-difference-of-arrival (TDOA) measurements. The two-stage weighted least squares (TWLS) algorithm has been widely used in the TDOA location. However, the ...
Efficient underwater acoustical localization method based on time difference and bearing measurements

Zhang, Liang; Zhang, Tao; Shin, Hyo-Sang; Xu, Xiang (IEEE, 2020-12-16)

This article addresses the underwater acoustical localization problem by using the time-difference-of-arrival (TDOA) and bearing-angle-of-arrival (BAOA) measurements. For the underwater acoustic equipment, such as the ...
Element partitioning and electron backscatter diffraction analysis from feeding wire to as-deposited microstructure of wire and arc additive manufacturing with super duplex stainless steel

Zhang, Xiaoyong; Wang, Kehong; Zhou, Qi; Kong, Jian; Peng, Yong; Ding, Jialuo; Diao, Chenglei; Yang, Dongqing; Huang, Yong; Zhang, Tao; Williams, Stewart W. (Elsevier, 2019-12-24)

The redistribution of alloying elements and the crystallographic characterizations in wire and arc additive manufactured (WAAM) super duplex stainless steel (SDSS) was investigated from the wire to the final as-deposited ...
Exploring the use of graphene lubricant and TiO2 nanolubricants in micro deep drawing of stainless steel SUS301

Pan, Di; Zhang, Guangqing; Jia, Fanghui; Wu, Hui; Lu, Yao; Zhang, Tao; Li, Lianjie; Lin, Fei; Yang, Ming; Jiang, Zhengyi (Springer, 2024-01-25)

This study investigates the effects of different lubrication conditions on drawing force and microcup formation during micro deep drawing (MDD). Results show that graphene lubricant, in combination with TiO2 nanolubricants, ...
Geomagnetic gradient-assisted evolutionary algorithm for long-range underwater navigation

Zhang, Jiayu; Zhang, Tao; Shin, Hyo-Sang; Wang, Jian; Zhang, Chen (IEEE, 2020-10-30)

Extensive research results have shown that animals like pigeons and turtles can use geomagnetic information for long-distance migration and homing. This article studies the bionic navigation method inspired by magnetotaxis ...
Hybrid wire - arc additive manufacture and effect of rolling process on microstructure and tensile properties of Inconel 718

Zhang, Tao; Li, Huigui; Gong, Hai; Wu, Yunxin; Diao, Chenglei; Zhang, Xiaoyong; Williams, Stewart (Elsevier, 2021-09-08)

Wire - arc additive manufacture (WAAM) is suitable for Inconel 718 components due to its high deposition efficiency. However, large columnar dendrites decrease the mechanical properties and can cause severe mechanical ...
In-situ structural identification of Zr3Al2 type metastable phase during crystallization of a Zr-based MG

Xing, Yan; Li, Yan; Wang, Xiangke; Yu, Xiangtian; Zhang, Tao; Georgarakis, Konstantinos (Elsevier, 2016-08-21)

A metastable phase was detected using higher energy synchrotron radiation when Zr-based metallic glass (MG) was annealed under vacuum in Linkam hot stage at 848 K. The formation and transformation processes of metastable ...
Study on location-related thermal cycles and microstructure variation of additively manufactured Inconel 718

Zhang, Tao; Li, Huigui; Gong, Hai; Wu, Yunxin; Chen, Xin; Zhang, Xiaoyong (Elsevier, 2022-04-04)

The complicated thermal history of wire + arc additive manufacturing (WAAM) will affect the microstructure variation and mechanical properties of the as-deposited material. Numerial models of Inconel 718 in WAAM deposition ...

Browsing by Author "Zhang, Tao"

Browsing by Author "Zhang, Tao"

Search CERES

Browse

All of CERES

My Account