Browsing by Author "Shehab, Essam"

Browsing by Author "Shehab, Essam"

Sort by: Order: Results:

  • Mohd Saad, Norhairin; Al-Ashaab, Ahmed; Maksimovic, Maksim; Zhu, L.; Shehab, Essam; Ewers, P.; Kassam, A. (Springer, 2013-03-01)
    Problem solving is a crucial skill in product development. Any lack of effective decision making at an early design stage will affect productivity and increase costs and the lead time for the other stages of the product ...
  • Mohd Saad, Norhairin (Cranfield University, 2013-03)
    This research project aims to develop a novel A3 thinking approach to support knowledge driven design that aids the generation of decision making within a Lean Product and Process Development (LeanPPD) environment. This ...
  • Shehab, Essam; Ball, Peter D.; Tjahjono, Benny (Cranfield University, 2013-09-19)
    ICMR2013 was organised by Cranfield University on the 19-20 September 2013. The conference focuses on any aspects of product development, manufacturing technology, manufacturing systems, information systems and digital ...
  • Bankole, O. O.; Roy, Rajkumar; Shehab, Essam; Wardle, P. (Cranfield University Press, 2009-04-01)
    The Industrial Product-Service System (IPS2) takes a whole life cycle view in order to consider the total cost of the IPS2 offering. This paper focuses on the concept of customer affordability which aims to review current ...
  • Schwabe, Oliver; Shehab, Essam; Erkoyuncu, John (Elsevier, 2016-11-02)
    This paper presents an approach for determining the most appropriate technique for cost estimation of innovative high value manufacturing products depending on the amount of prior data available. Case study data from the ...
  • Badewi, Amgad; Shehab, Essam; Peppard, Joe (Cranfield University Press, 2013-09-19)
    Achieving success for ERP systems is not only concerned with deploying the technology on time and on budget but also concerned with the level of achieving targeted benefits from the system. This level of achieving targeted ...
  • Al-Ashaab, Ahmed; Golob, Matic; Noriega, Paula; Torriani, Filippo; Alvarez, Pedro; Beltran, Ana; Busachi, Alessandro; Ex-Ignotis, Lambert; Rigatti, Carlotta; Sharma, Sanjiv (2013-09-19)
    The Configuration Optimisation of Next-Generation Aircraft (CONGA) is a proposed framework in a response to industrial need to enhance the aerospace capability in the UK. In order to successfully address this challenge, a ...
  • Rojo Abollado, Jaime; Shehab, Essam; Bamforth, P. (Elsevier, 2017-05-09)
    Companies who operate in highly regulated industries have further challenges to the usual competition, continuous cost reduction and product development challenges. To address these requirements companies optimise their ...
  • Yadekar, Yaser; Shehab, Essam; Mehnen, Jorn (Cranfield University Press, 2013-09-19)
    The rapid growth Information systems and advanced network technologies have significant impact on enterprises around the world. Enterprises are trying to gain competitive advantage in open global markets by using the latest ...
  • Elnadi, Moustafa; Shehab, Essam; Peppard, Joe (Cranfield University Press, 2013-09-19)
    Lean thinking is claimed to be as important to services as it has been to manufacturing. However, there is yet a lack of empirical research examining the possibility of applying lean thinking in Product-Service System ...
  • Zeng, Binxu; Salonitis, Konstantinos; Jolly, Mark R. (2013-09-02)
    The CRIMSON process is an alternative process to conventional casting that can be used for small to medium batch sizes. The aim of this process are to improve the casting quality and reduce the energy consumption within ...
  • Al-Ashaab, Ahmed; Shehab, Essam; Alam, Rahman; Sopelanad, Amaia; Sorli, Mikel; Flores, Myrna; Taisch, Marco; Stokic, Dragan; James-Moore, Mike (2012-06-30)
    This paper is presenting the conceptual Lean Product and Process Development (LeanPPD) model which is a project funded by the EU-PF7. The project is addressing the needs of European manufacturing companies of a new model ...
  • Khan, Muhammad Sharjeel (Cranfield University, 2012-08)
    ‘Lean’ or ‘lean thinking’ refers to an improvement philosophy which focuses on the fulfilment of customer value and the reduction of waste. This philosophy is credited with the extraordinary rise of Toyota, one of the ...
  • Amorim-Melo, P; Shehab, Essam; Kirkwood, Leigh; Baguley, Paul (Elsevier, 2014-10-31)
    High value systems are determined by a wide structure, where operations are considered to be one structural component. Nowadays “down-time” as a major impact in the operation costs of any system. To avoid or minimize ...
  • Sanya, Isaac; Shehab, Essam; Badawy, Mohamed (Cranfield University Press, 2013-09-19)
    This research paper presents a cost engine system that estimates the whole life cycle cost of long-term digital preservation (LTDP) activities using cloud-based technologies. A qualitative research methodology has been ...
  • Romero Rojo, Francisco Javier; Roy, Rajkumar; Shehab, Essam; Cheruvu, Kalyan; Mason, Phil (Professional Engineering Publishing, 2012-01-31)
    This paper provides a cost estimating framework for electrical, electronic and electromechanical (EEE) components obsolescence, which represents the main source of obsolescence issues, owing to the increasingly short life ...
  • Shehab, Essam; Sanya, Isaac; Badawy, Mohamed; Ocal, Fatma; Namiesnik, Bartosz; Morineau, Julien; Odika, Stephen; Fernandez Ortiz, Zaira (Cranfield University Press, 2013-09-19)
    The rapid increase in volume of digital information can cause concern among organisations regarding manageability, costs and security of their information in the long-term. As cloud computing technology is often used for ...
  • Ma, Weitao (Cranfield University, 2011-01)
    The application of composites has been increasing dramatically in aerospace structures recently, for example, composites have contributed over 50 percent of the structure mass of large transport airplanes Boeing 787 and ...
  • Ahmad, Wasim (Cranfield University, 2012-09)
    This PhD project aims to develop a cost modelling system to support lean product and process development. The system enables the designers to assess the design along with associated manufacturing processes and ...
  • Erkoyuncu, John A. (Cranfield University, 2011-01)
    Globally manufacturing based industries are typically transforming operations to enhance the delivery of services throughout equipment use. Within the defence industry, Contracting for Availability (CfA) has emerged as ...