Browsing by Author "Hutabarat, Windo"

Browsing by Author "Hutabarat, Windo"

Sort by: Order: Results:

  • Oyekan, John; Hutabarat, Windo; Turner, Christopher; Tiwari, Ashutosh; Prajapat, Neha; Ince, Nadir; Gan, Xiao-Peng; Waller, Tony (Elsevier, 2015-10-27)
    There is an increasing need to eliminate wasted time and money during factory layout design and subsequent construction. It is presently difficult for engineers to foresee if a certain layout is optimal for work and material ...
  • Simon, E.; Oyekan, John; Hutabarat, Windo; Tiwari, Ashutosh; Turner, Christopher (D A A A M International Vienna, 2018)
    Discrete-Event Simulation (DES) is commonly used for the simulation of manufacturing systems. In many practical cases, DES practitioners have to make simplifications or to use the software in an unconventional or convoluted ...
  • Hutabarat, Windo; Oyekan, John; Turner, Christopher; Tiwari, Ashutosh; Prajapat, Neha; Gan, Xiao-Peng; Waller, Anthony (Institute of Electrical and Electronics Engineers, 2017-01-19)
    Recent introduction of low-cost 3D sensing and affordable immersive virtual reality have lowered the barriers for creating and maintaining 3D virtual worlds. In this paper, we propose a way to combine these technologies ...
  • Ab Rashid, Mohd Fadzil Faisae; Tiwari, Ashutosh; Hutabarat, Windo (Elsevier, 2017-07-11)
    Combining Assembly Sequence Planning (ASP) and Assembly Line Balancing (ALB) is now of increasing interest. The customary approach is the sequential approach, where ASP is optimised before ALB. Recently, interest in the ...
  • Ab Rashid, Mohd Fadzil Faisae; Hutabarat, Windo; Tiwari, Ashutosh (SAGE Publications, 2012-11-30)
    Assembly optimisation activities that involve assembly sequence planning and assembly line balancing have been extensively studied because of the importance of optimal assembly efficiency to manufacturing competitiveness. ...
  • Turner, Christopher; Hutabarat, Windo; Oyekan, John; Tiwari, Ashutosh (Institute of Electrical and Electronics Engineers, 2016-08-18)
    This paper reviews the area of combined discrete event simulation (DES) and virtual reality (VR) use within industry. While establishing a state of the art for progress in this area, this paper makes the case for VR DES ...
  • Mgbemena, Chika Edith; Oyekan, John; Tiwari, Ashutosh; Xu, Yuchun; Fletcher, Sarah; Hutabarat, Windo; Prabhu, Vinayak Ashok (Springer, 2016-07-10)
    Manual handling involves transporting of load by hand through lifting or lowering and operators on the manufacturing shop floor are daily faced with constant lifting and lowering operations which leads to Work-Related ...
  • Gonzalez-Franco, M.; Pizarro, R.; Cermeron, J.; Li, Katie; Thorn, J.; Hutabarat, Windo; Tiwari, Ashutosh; Bermell, P. (Frontiers Media, 2017-01-27)
    In the complex manufacturing sector a considerable amount of resources is focused on training workers and developing new skills. Increasing the effectiveness of those processes and reducing the investment required is an ...
  • Petti, Alessandro; Hutabarat, Windo; Oyekan, John; Turner, Christopher; Tiwari, Ashutosh; Prajapat, Neha; Gan, Xiao-Peng (Operational Research Society, 2016-04-13)
    Discrete Event Simulation (DES) can help speed up the layout design process. It offers further benefits when combined with Virtual Reality (VR). The latest technology, Immersive Virtual Reality (IVR), immerses users in ...
  • Durugbo, Christopher; Hutabarat, Windo; Tiwari, Ashutosh; Alcock, Jeffrey R. (Springer Science Business Media, 2012-06-19)
    In this article, the ‘information channel diagram' (ICD) approach is introduced as a diagrammatical tool for modelling information flow during the delivery phase of organisations in which goods are deployed or delivered ...
  • Ab Rashid, Mohd Fadzil Faisae; Tiwari, Ashutosh; Hutabarat, Windo (Glasgow Caledonian University, 2011-12)
    In a typical assembly optimisation, Assembly Sequence Planning and Assembly Line Balancing are performed independently. However, competition has compelled the manufacturer to innovate by integrating the optimisation of ...
  • Such, Matthew; Ward, Carwyn; Hutabarat, Windo; Tiwari, Ashutosh (Elsevier, 2014-12-10)
    Hand layup is still the dominant forming process for the creation of the widest range of complex geometry and mixed material composite parts. However, this process is still poorly understood and informed, limiting productivity. ...
  • Durugbo, Christopher; Hutabarat, Windo; Tiwari, Ashutosh; Alcock, Jeffrey R. (Elsevier Science B.V., Amsterdam., 2011-08-01)
    Collaboration means working together to achieve a common goal or to solve a problem, and in modern businesses, it is an important factor for information sharing and quality. This is due to the ability of collaborations ...
  • Ab Rashid, Mohd Fadzil Faisae; Hutabarat, Windo; Tiwari, Ashutosh (Sage, 2016-10-24)
    In assembly optimisation, assembly sequence planning and assembly line balancing have been extensively studied because both activities are directly linked with assembly efficiency that influences the final assembly costs. ...
  • Flores-Vaquero, Paul; Tiwari, Ashutosh; Alcock, Jeffrey R.; Hutabarat, Windo; Turner, Christopher (SAGE, 2016-06-30)
    A considerable proportion of current point-of-care devices do not offer a wide enough set of capabilities if they are to function in any telehealth system. There is a need for intermediate devices that lie between healthcare ...
  • Moreno, Mariale; Turner, Christopher; Tiwari, Ashutosh; Hutabarat, Windo; Charnley, Fiona; Widjaja, Debora; Mondini, Luigi (Elsevier, 2017-07-11)
    The minimization of energy, waste, and emissions in operations are the foremost sustainability goals in industry. The shift from a linear product lifecycle to a circular one is required, along with increased energy efficiency ...
  • Ab Rashid, Mohd Fadzil Faisae; Hutabarat, Windo; Tiwari, Ashutosh (Springer Science Business Media, 2011-12-31)
    Assembly optimisation activities occur across development and production stages of manufacturing goods. Assembly Sequence Planning (ASP) and Assembly Line Balancing (ALB) problems are among the assembly optimisation. ...
  • Tiwari, Ashutosh; Hoyos, Paula Noriega; Hutabarat, Windo; Turner, Christopher; Ince, Nadir; Gan, Xiao-Peng; Prajapat, Neha (Elsevier, 2015-01-22)
    The aim of this work is to capture current practices in the use of computational optimisation in UK engineering companies and identify the current challenges and future needs of the companies. To achieve this aim, a survey ...
  • Durugbo, Christopher; Hutabarat, Windo; Tiwari, Ashutosh; Alcock, Jeffrey R. (2010-04-15)
    In this paper, the Systems Modelling Language (SysML) is introduced as a technique for the design of aproduct-service system (PSS). In examples of the requirements diagram in SysML, this paper shows that:(1) a PSS can ...