Browsing by Author "Aria, Adrianus Indrat"

Browsing by Author "Aria, Adrianus Indrat"

Sort by: Order: Results:

  • Additive manufacturing and physicomechanical characteristics of PEGDA hydrogels: recent advances and perspective for tissue engineering 
    Khalili, Mohammad Hakim; Zhang, Rujing; Wilson, Sandra; Goel, Saurav; Impey, Susan A.; Aria, Adrianus Indrat (MDPI, 2023-05-17)
    In this brief review, we discuss the recent advancements in using poly(ethylene glycol) diacrylate (PEGDA) hydrogels for tissue engineering applications. PEGDA hydrogels are highly attractive in biomedical and biotechnology ...
  • Atomic layer deposited oxide films as protective interface layers for integrated graphene transfer 
    Cabrero-Vilatela, Andrea; Alexander-Webber, Jack; Sagade, Abhay; Aria, Adrianus Indrat; Braeuninger-Weimer, Philipp; Martin, Marie-Blandine; Weatherup, Robert; Hofmann, Stephan (IOP Publishing: Hybrid Open Access, 2017-10-17)
    The transfer of chemical vapour deposited (CVD) graphene from its parent growth catalyst has become a bottleneck for many of its emerging applications. The sacrificial polymer layers that are typically deposited onto ...
  • Bolometric detection of terahertz quantum cascade laser radiation with graphene-plasmonic antenna arrays 
    Degl'Innocenti, Riccardo; Xiao, Long; Kindness, Stephen J.; Kamboj, Varun S.; Wei, Binbin; Braeuninger-Weimer, Philipp; Nakanishi, Kenichi; Aria, Adrianus Indrat; Hofmann, Stephan; Beere, Harvey E.; Ritchie, David A. (IOP Publishing, 2017-03-27)
    We present a fast room temperature terahertz detector based on graphene loaded plasmonic antenna arrays. The antenna elements, which are arranged in series and are shorted by graphene, are contacting source and drain ...
  • Chemical vapour deposition of freestanding sub-60 nm graphene gyroids 
    Cebo, Tomasz; Aria, Adrianus Indrat; Dolan, James A.; Weatherup, Robert S.; Nakanishi, Kenichi; Kidambi, Piran R.; Divitini, Giorgio; Ducati, Caterina; Steiner, Ullrich; Hofmann, Stephan (AIP Publishing, 2017-12-18)
    The direct chemical vapour deposition of freestanding graphene gyroids with controlled sub-60 nm unit cell sizes is demonstrated. Three-dimensional (3D) nickel templates were fabricated through electrodeposition into a ...
  • Compressive behavior and failure mechanisms of freestanding and composite 3D graphitic foams 
    Nakanishi, Kenichi; Aria, Adrianus Indrat; Berwind, Matthew; Weatherup, Robert S.; Eberl, Christoph; Hofmann, Stephan; Fleck, Norman A. (Elsevier, 2018-08-09)
    Open-cell graphitic foams were fabricated by chemical vapor deposition using nickel templates and their compressive responses were measured over a range of relative densities. The mechanical response required an interpretation ...
  • Effects of long-term exposure to the low-earth orbit environment on drag augmentation systems 
    Serfontein, Zaria; Kingston, Jennifer; Hobbs, Stephen; Impey, Susan A.; Aria, Adrianus Indrat; Holbrough, Ian E.; Beck, James C. (Elsevier, 2021-06-10)
    Spacecraft in low-Earth orbit are exposed to environmental threats which can lead to material degradation and component failures. The presence of atomic oxygen and collisions from orbital debris have detrimental effects ...
  • Effects of long-term exposure to the low-earth orbit environment on drag augmentation systems 
    Serfontein, Zaria; Kingston, Jennifer; Hobbs, Stephen; Holbrough, Ian E.; Beck, James C.; Impey, Susan A.; Aria, Adrianus Indrat (IAF, 2020-10-14)
    Spacecraft in low-Earth orbit are exposed to environmental threats which can lead to material degradation and component failures. The presence of atomic oxygen and collisions from orbital debris have detrimental effects ...
  • External amplitude and frequency modulation of a terahertz quantum cascade laser using metamaterial/graphene devices 
    Kindness, S. J.; Jessop, D. S.; Wei, B.; Wallis, R.; Kamboj, Varun S.; Xiao, L.; Ren, Y.; Braeuninger-Weimer, P.; Aria, Adrianus Indrat; Hofmann, S.; Beere, H. E.; Ritchie, David A.; Degl’Innocenti, R. (Nature Publishing Group, 2017-08-09)
    Active control of the amplitude and frequency of terahertz sources is an essential prerequisite for exploiting a myriad of terahertz applications in imaging, spectroscopy, and communications. Here we present a optoelectronic, ...
  • From growth surface to device interface: preserving metallic Fe under monolayer hexagonal boron nitride 
    Caneva, Sabina; Martin, Marie-Blandine; D'Arsie, Lorenzo; Aria, Adrianus Indrat; Sezen, Hikmet; Amati, Matteo; Gregoratti, Luca; Sugime, Hisashi; Esconjauregui, Santiago; Robertson, John; Hofmann, Stephan; Weatherup, Robert S. (American Chemical Society, 2017-08-08)
    We investigate the interfacial chemistry between Fe catalyst foils and monolayer hexagonal boron nitride (h-BN) following chemical vapor deposition and during subsequent atmospheric exposure, using scanning electron ...
  • Graphene-based nanolaminates as ultra-high permeation barriers 
    Sagade, Abhay A.; Aria, Adrianus Indrat; Edge, Steven; Melgari, Paolo; Gieseking, Bjoern; Bayer, Bernhard C.; Meyer, Jannik C.; Bird, David; Brewer, Paul; Hofmann, Stephan (Nature Publishing Group, 2017-10-23)
    Permeation barrier films are critical to a wide range of applications. In particular, for organic electronics and photovoltaics not only ultra-low permeation values are required but also optical transparency. A laminate ...
  • Graphene-passivated nickel as an efficient hole-injecting electrode for large area organic semiconductor devices 
    Di Nuzzo, Daniele; Mizuta, Ryo; Nakanishi, Kenichi; Martin, Marie-Blandine; Aria, Adrianus Indrat; Weatherup, Robert; Friend, Richard H.; Hofmann, Stephan; Alexander-Webber, Jack (AIP Publishing, 2020-04-20)
    Efficient injection of charge from metal electrodes into semiconductors is of paramount importance to obtain high performance optoelectronic devices. The quality of the interface between the electrode and the semiconductor ...
  • Mechanical behavior of 3d printed poly(ethylene glycol) diacrylate hydrogels in hydrated conditions investigated using atomic force microscopy 
    Hakim Khalili, Mohammad; Panchal, Vishal; Dulebo, Alexander; Hawi, Sara; Zhang, Rujing; Wilson, Sandra; Dossi, Eleftheria; Goel, Saurav; Impey, Susan A.; Aria, Adrianus Indrat (American Chemical Society, 2023-04-05)
    Three-dimensional (3D) printed hydrogels fabricated using light processing techniques are poised to replace conventional processing methods used in tissue engineering and organ-on-chip devices. An intrinsic potential problem ...
  • Nanoindentation response of 3D printed PEGDA hydrogels in hydrated environment 
    Hakim Khalili, Mohammad; Williams, Craig J.; Micallef, Christian; Duarte-Martinez, Fabian; Afsar, Ashfaq; Zhang, Rujing; Wilson, Sandra; Dossi, Eleftheria; Impey, Susan A.; Goel, Saurav; Aria, Adrianus Indrat (American Chemical Society, 2023-01-20)
    Hydrogels are commonly used materials in tissue engineering and organ-on-chip devices. This study investigated the nanomechanical properties of monolithic and multilayered poly(ethylene glycol) diacrylate (PEGDA) hydrogels ...
  • Numerical Analysis of Reduced Frequency on Flapping Tandem Foils 
    Joevian, Michael; Tobing, Sheila; Surjadi, Rainer Louis; Timothy, Kenneth; Aria, Adrianus Indrat (Praise Worthy Prize, 2023-06-30)
    Numerous investigations on flapping wing motion have been conducted over the last two decades. The study of flapping wing motion was inspired by the possibility of using it to design and develop micro air vehicles. The ...
  • Parameter space of atomic layer deposition of ultra-thin oxides on graphene 
    Aria, Adrianus Indrat; Nakanishi, Kenichi; Xiao, Long; Braeuninger-Weimer, Philipp; Sagade, Abhay A.; Alexander-Webber, Jack; Hofmann, Stephan (ACS Applied Materials and Interfaces, 2016-10-10)
    Atomic layer deposition (ALD) of ultrathin aluminum oxide (AlOx) films was systematically studied on supported chemical vapor deposition (CVD) graphene. We show that by extending the precursor residence time, using either ...
  • Piezoelectic Materials for energy harvesting and sensing applications: roadmap for future smart materials 
    Mahapatra, Susmriti Das; Mohapatra, Preetam Chandan; Aria, Adrianus Indrat; Christie, Graham; Mishra, Yogendra Kumar; Hofmann, Stephan; Thakur, Vijay Kumar (Wiley, 2021-07-13)
    Piezoelectric materials are widely referred to as “smart” materials because they can transduce mechanical pressure acting on them to electrical signals and vice versa. They are extensively utilized in harvesting mechanical ...
  • Rapid surface finishing of chemical vapour deposited tungsten carbide hard coatings by electropolishing 
    Micallef, Christian; Chiu, Cheng-Wei; Zhuk, Yuri; Aria, Adrianus Indrat (Elsevier, 2021-11-15)
    Tungsten/tungsten carbide (W/WC) coatings deposited through chemical vapour deposition (CVD) exhibit favourable mechanical properties and are widely used to extend the working life and performance of engineering parts which ...
  • Recent progress in precision machining and surface finishing of tungsten carbide hard composite coatings 
    Micallef, Christian; Zhuk, Yuri; Aria, Adrianus Indrat (MDPI, 2020-07-25)
    Owing to their high hardness, fracture toughness and oxidation resistance, tungsten carbide (WC) coatings are extensively deposited on parts that operate in demanding applications, necessitating wear, erosion, and corrosion ...
  • Self-healing mechanisms for 3D-printed polymeric structures: from lab to reality 
    Almutairi, Mohammed Dukhi; Aria, Adrianus Indrat; Thakur, Vijay Kumar; Khan, Muhammad A. (MDPI, 2020-07-11)
    Existing self-healing mechanisms are still very far from full-scale implementation, and most published work has only demonstrated damage cure at the laboratory level. Their rheological nature makes the mechanisms for damage ...
  • Strain self-sensing tailoring in functionalised carbon nanotubes/epoxy nanocomposites in response to electrical resistance change measurement 
    An, Donglan; Nourry, Jim; Gharavian, Somayeh; Thakur, Vijay Kumar; Aria, Adrianus Indrat; Durazo-Cardenas, Isidro; Khaleque, Tasnuva; Nezhad, Hamed Yazdani (SSRN, 2020-10-26)
    Carbon nanotubes (CNTs) are inherently multifunctional, conductive and possess piezo-resistive characteristics. Aiming at the multi-functionality of materials, nanocomposites made of epoxy resin with embedded CNTs are a ...