Browsing by Title

Browsing by Title

Sort by: Order: Results:

  • Tawell, M G (Engineering Systems Department, 2010-11-08)
    A widely used class of Less Lethal Weapon is the kinetic energy projectile. This can cause blunt trauma to the targeted person and, under certain circumstances, its use can result in permanent injury or death. The low ...
  • Suntharalingam, P (2011-09-08)
    The major contribution of the work presented in this thesis is a thorough investigation of the constraints on regenerative braking and kinetic energy recovery enhancement for electric/hybrid electric vehicles during braking. ...
  • Suntharalingam, P; Economou, J T; Knowles, K (Sage / IMECHE, 2016-11-06)
    In this paper a novel regenerative dual braking strategy is proposed for utility/goods delivery unmanned vehicles in public roads, which improves the regenerative energy capturing ability and consequently improves the fuel ...
  • Jurado Pontes, Nelia; Gohari Darabkhani, Hamidreza; Anthony, Edward J.; Oakey, John (C2ES, 2013-12)
    Oxy-fuel combustion is a clean coal technology based on firing fuel in an enriched oxygen atmosphere to obtain high CO2 concentrations in the exhaust gas. Experimental tests were performed at Cranfield University using a ...
  • Dutta, S.; Parsons, Simon A.; Bhattacharjee, C.; Jarvis, Peter; Datta, S.; Bandyopadhyay, S. (Elsevier, 2009-12-15)
    Recycling and reuse of wastewater after purification will reduce the environmental pollution as well as fulfill the increasing demand of water. Adsorption-based water treatment process is very popular for dye-house wastewater ...
  • Tong, Shuai; Li, Lin; Duan, Lunbo; Zhao, Changsui; Anthony, Edward J. (Elsevier, 2018-10-25)
    Lignite char gasification experiments in CO2, H2O and their mixture were performed in a fluidized bed reactor over the temperatures range of 1060–1210 K. The active sites occupied by different gasifying agents in CO2/H2O ...
  • Chen, Liang; Wang, Chunbo; Wang, Ziming; Anthony, Edward J. (Elsevier, 2017-07-14)
    The interaction of calcination and sulfation in the simultaneous calcination/sulfation of limestone sorbent under circulating fluidized bed boiler conditions was studied. A specially designed constant-temperature reactor ...
  • Sumner, Joy; Simms, Nigel; Shin, Aya; Pearson, Jonathan (Springer, 2017-04-05)
    Investigations into potentially extending the lives of UK advanced gas-cooled reactors have highlighted the need for improved understanding of the long-term oxidation and carburisation of 9Cr ferritic steels. These steels ...
  • Battat, J.; Huang, Zhaorong; Donohue, P. P.; Todd, M. A.; Whatmore, Roger W. (Taylor and Francis, 2004)
    The phase transformations from amorphous to pyrochlore to perovskite in lead scandium tantalate (PST) thin films during rapid thermal annealing process (RTA) have been studied. Volume fractions for pyrochlore and perovskite ...
  • Le Corre, Kristell S.; Valsami-Jones, Eugenia; Hobbs, Phil; Parsons, Simon A. (Taylor & Francis, 2007-12-31)
    The presence of white deposits in specific areas of wastewater treatment plants is generally the consequence of the spontaneous formation of a mineral called struvite. Struvite forms when the levels of phosphate, ammonium ...
  • Dayan, Rony; Evans, Stephen (Emerald, 2006)
    The purpose of this paper is to describe two related fields – knowledge management (KM) and capability maturity model integrated (CMMISM) – and highlight their similarities.
  • Molian, David (2013-03-01)
  • Cicconi, P.; Raffaeli, R. (Cranfield University Press, 2009-03-31)
    Virtual prototyping lacks of application in SME due to the costs of software systems and the necessity of skilled operators. The aim is to improve dripper emitters design process reducing costs. A knowledge base is ...
  • Al-Ashaab, Ahmed; Molyneaux, M.; Doultsinou, A.; Brunner, B.; Martínez, E.; Moliner, F.; Santamaría, V.; Tanjore, D.; Ewers, P.; Knight, G. (Elsevier Science B.V., Amsterdam., 2012-02-01)
    A knowledge-based environment to support product design validation of refresh projects (projects with minor changes in comparison with previous ones) has been developed. This was achieved by capturing the relation between ...
  • Guenov, Marin; Lockett, Helen L. (Design Society, 2007)
    In today's competitive market many consumer products are designed with complex curved shapes to meet customers' demands for styling and ergonomics. These styled products are commonly manufactured using moulding processes ...
  • Lockett, Helen L. (Cranfield UniversitySchool of Engineering, 2005-07)
    This thesis presents a knowledge based manufacturing advisor for Computer Aided Design. The aim of the project has been to develop techniques that can help designers to evaluate the manufacturability of moulded parts ...
  • Araci, Zehra Canan; Al-Ashaab, Ahmed; Maksimovic, Maksim (Academic Conferences and Publishing International (ACPI) / Academic Conferences International Limited, 2016-04-01)
    The increased international competition forces companies to sustain and improve market share through the production of a high quality product in a cost effective manner and in a shorter time. Set‑based concurrent engineering ...
  • Baxter, David; Roy, Rajkumar; Doultsinou, Athanasia; Gao, J.; Kalta, M. (Taylor & Francis, 2009-12-01)
    This paper presents a framework for knowledge reuse in a Product-Service Systems design scenario. The project aim is to develop a methodology to capture, represent and reuse knowledge to support product development in a ...
  • Levett, G. P. (Cranfield University, 2001-06)
    The subject of this Engineering Doctorate research is Knowledge Management (KM) which is a philosophy for improving core business activities of a organisation based upon the examination and development of its knowledge-base. ...
  • Maindze, Alexslis; Jennions, Ian; Skaf, Zakwan (IOS Press, 2017-09-07)
    Knowledge management continues to be characterized by strong contextual application with diversity of techniques, tools and applications which practitioners far and wide seem to agree and adopt. However, when it comes to ...