Browsing by Title

Browsing by Title

Sort by: Order: Results:

  • 30 years on - what have we learned about careers? 
    Adamson, Stephen; Doherty, Noeleen; Viney, C. (1996-01-01)
    In everyday conversation, the term ‘career’ is generally understood to refer to the sequence of work-related experiences an individual has over the course of their working lifetime. For many people, a ‘career’ is distinct ...
  • 3D advance mapping of soil properties 
    Veronesi, Fabio (Cranfield University, 2012-07)
    Soil is extremely important for providing food, biomass and raw materials, water and nutrient storage; supporting biodiversity and providing foundations for man-made structures. However, its health is threatened by human ...
  • 3D automatic target recognition for future LIDAR missiles 
    Kechagias-Stamatis, Odysseas; Aouf, Nabil; Richardson, Mark A. (IEEE, 2017-01-10)
    We present a real-time three-dimensional automatic target recognition approach appropriate for future light detection and ranging-based missiles. Our technique extends the speeded-up robust features method into the third ...
  • 3D automatic target recognition for missile platforms 
    Kechagias Stamatis, Odysseas (2017-05)
    The quest for military Automatic Target Recognition (ATR) procedures arises from the demand to reduce collateral damage and fratricide. Although missiles with two-dimensional ATR capabilities do exist, the potential of ...
  • A 3D CFD analysis of flow past a hipped roof with comparison to industrial building standards 
    Khalil, Khalid; Khan, Huzafa; Chahar, Divyansh; Townsend, Jamie F.; Rana, Zeeshan A. (Techno Press, 2022-06-25)
    Three-dimensional (3D) computational fluid dynamics (CFD) analysis of flow around a hipped-roof building representative of UK inland conditions are conducted. Unsteady simulations are performed using three variations of ...
  • 3D characterisation of tool wear whilst diamond turning silicon 
    Durazo-Cardenas, Isidro; Shore, Paul; Luo, X.; Jacklin, T.; Impey, Susan A.; Cox, A. (Elsevier Science B.V., Amsterdam., 2006-07-24)
    Nanometrically smooth infrared silicon optics can be manufactured by the diamond turning process. Due to its relatively low density, silicon is an ideal optical material for weight sensitive infrared (IR) applications. ...
  • 3D conformal antennas for radar applications 
    Fourtinon, L (2018)
    Embedded below the radome of a missile, existing RF-seekers use a mechanical rotating antenna to steer the radiating beam in the direction of a target. Latest research is looking at replacing the mechanical antenna ...
  • A 3D extension to cortex like mechanisms for 3D object class recognition 
    Flitton, Greg T.; Breckon, Toby P.; Megherbi, Najla (2012-06-21)
    We introduce a novel 3D extension to the hierarchical visual cortex model used for prior work in 2D object recognition. Prior work on the use of the visual cortex standard model for the explicit task of object class ...
  • A 3D immersive discrete event simulator for enabling prototyping of factory layouts 
    Oyekan, John; Hutabarat, Windo; Turner, Christopher J.; Tiwari, Ashutosh; Prajapat, Neha; Ince, Nadir; Gan, Xiao-Peng; Waller, Tony (Elsevier, 2015-10-27)
    There is an increasing need to eliminate wasted time and money during factory layout design and subsequent construction. It is presently difficult for engineers to foresee if a certain layout is optimal for work and material ...
  • 3D Lagrangian particle tracking of a subsonic jet using multi-pulse Shake-The-Box 
    Manovski, Peter; Novara, Matteo; Karthik, Nagendra; Mohan, Depuru; Geisler, Reinhard; Schanz, Daniel; Agocs, Janos; Godbersen, Philipp; Schröder, Andreas (Elsevier, 2021-01-19)
    Three-dimensional (3D) Lagrangian Particle Tracking (LPT) was performed on a subsonic jet flow at Mach 0.506 and 0.845 generated by a round nozzle with diameter-based Reynolds numbers of 1.7×105 and 3.1×105, respectively. ...
  • 3D modelling of Ti–6Al–4V linear friction welds 
    McAndrew, Anthony; Colegrove, Paul A.; Buhr, Clement (Taylor & Francis, 2016-12-05)
    Linear friction welding (LFW) is a solid-state joining process that significantly reduces manufacturing costs when fabricating Ti–6Al–4V aircraft components. This article describes the development of a novel 3D LFW process ...
  • 3D Panoptic Segmentation with Unsupervised Clustering for Visual Perception in Autonomous Driving 
    Grenier, Amelie (2021-09)
    For the past decade, substantial progress has been achieved in the field of visual per ception for autonomous driving application thanks notably to the capabilities of deep learning techniques. This work aims to leverage ...
  • 3D planar velocity measurements, using Mach-Zehnder interferometric-filter-based planar Doppler velocimetry (MZI-PDV) and imaging fibre bundles 
    Lu, Z. H.; Charrett, Thomas O. H.; Ford, Helen D.; Tatam, Ralph P. (2008-12-31)
    Three component planar flow-field measurements are made using imaging fibre bundles to port different views of the measurement plane, defined by a laser light sheet, to a single imaging head. The Doppler frequency shifts ...
  • 3D printing, the future of cost effective biomechanical testing 
    Franceskides, C.; Arnold, Emily; Horsfall, Ian; Clasper, J.; Tozzi, G.; Zioupos, Peter (SAFE, 2017-04-06)
  • A 3D-collaborative wireless network: towards resilient communication for rescuing flood victims 
    Rahman, Md. Arafatur; Hasan, Md. Munirul; Asyhari, A. Taufiq; Alam Bhuiyan, Md. Zakirul (IEEE, 2018-04-02)
    Every year, floods result in huge damage and devastation both to lives and properties all over the world. Much of this devastation and its prolonged effects result from a lack of collaboration among the rescue agents as a ...
  • 3D-printed coded apertures for x-ray backscatter radiography 
    Munoz, Andre Arelius Marcus; Vella, Anna; Healy, M. J. F.; Lane, David W.; Jupp, Ian; Lockley, D. (SPIE, 2017-09-07)
    Many different mask patterns can be used for X-ray backscatter imaging using coded apertures, which can find application in the medical, industrial and security sectors. While some of these patterns may be considered to ...
  • 3D-printed thermoplastic composite fasteners for single lap joint reinforcement 
    Li, Wenhao; Guo, Shijun; Giannopoulos, Ioannis K.; Lin, Minxiao; Xiong, Yi; Liu, Yiding; Shen, Zhengquan (Elsevier, 2021-12-10)
    This study presents findings for the strength and failure mechanism of a 3D-printed Continuous Carbon Fibre reinforced Onyx (CCF/Onyx) Thermo-Plastic Composite Fastener (TPCF) and a single lap-joint (SLJ) made of fibre/polymer ...
  • 4 Developing a framework to improve leadership performance in healthcare organisations: the case of the kingdom of Saudi Arabia 
    Algarni, Namshan; McLaughlin, Patrick; Al-Ashaab, Ahmed (BMJ, 2018-10-31)
    In order to improve leadership performance and enhance effective leadership in the healthcare sector organisations in general and the KSA in particular, this study proposes a theoretical framework to address the way in ...
  • 4D printing of materials for the future: opportunities and challenges 
    Joshi, Siddharth; Rawat, Krishna; Karunakaran, C.; Rajamohan, Vasudevan; Mathew, Arun Tom; Koziol, Krzysztof K. K.; Kumar Thakur, Vijay; Balan, A.S.S (Elsevier, 2019-10-16)
    The concept of 4D printing is its formation of complex three-dimensional structures that have the ability to adopt different shapes and forms when subjected to different environmental stimuli. A few researchers simply view ...
  • 4D printing of smart polymer nanocomposites: integrating graphene and acrylate based shape memory polymers 
    Chowdhury, Jaydeep; Anirudh, Premnath Vijay; Karunakaran, Chandrasekaran; Rajmohan, Vasudevan; Mathew, Arun Tom; Koziol, Krzysztof K. K.; Alsanie, Walaa F.; Kannan, Chidambaram; Balan, Arunachalam S. S.; Thakur, Vijay Kumar (MDPI, 2021-10-24)
    The ever-increasing demand for materials to have superior properties and satisfy functions in the field of soft robotics and beyond has resulted in the advent of the new field of four-dimensional (4D) printing. The ability ...