PhD, EngD, MPhil and MSc by research theses (SAS)
Permanent URI for this collection
Browse
Browsing PhD, EngD, MPhil and MSc by research theses (SAS) by Subject "Activated sludge modelling (ASM)"
Now showing 1 - 1 of 1
Results Per Page
Sort Options
Item Open Access Optimisation of a hollow fibre membrane bioreactor for water refuse(Cranfield University, 2010-09) Verrecht, Bart; Judd, Simon J.Over the last two decades, implementation of membrane bioreactors (MBRs) has increased due to their superior effluent quality and low plant footprint. However, they are still viewed as a high-cost option, both with regards to capital and operating expenditure (capex and opex). The present thesis extends the understanding of the impact of design and operational parameters of membrane bioreactors on energy demand, and ultimately whole life cost. A simple heuristic aeration model based on a general algorithm for flux vs. aeration shows the benefits of adjusting the membrane aeration intensity to the hydraulic load. It is experimentally demonstrated that a lower aeration demand is required for sustainable operation when comparing 10:30 to continuous aeration, with associated energy savings of up to 75%, without being penalised in terms of the fouling rate. The applicability of activated sludge modelling (ASM) to MBRs is verified on a community-scale MBR, resulting in accurate predictions of the dynamic nutrient profile. Lastly, a methodology is proposed to optimise the energy consumption by linking the biological model with empirical correlations for energy demand, taking into account of the impact of high MLSS concentrations on oxygen transfer. The determining factors for costing of MBRs differ significantly depending on the size of the plant. Operational cost reduction in small MBRs relies on process robustness with minimal manual intervention to suppress labour costs, while energy consumption, mainly for aeration, is the major contributor to opex for a large MBR. A cost sensitivity analysis shows that other main factors influencing the cost of a large MBR, both in terms of capex and opex, are membrane costs and replacement interval, future trends in energy prices, sustainable flux, and the average plant utilisation which depends on the amount of contingency built in to cope with changes in the feed flow.