Manufacturing and Materials
Permanent URI for this collection
Browse
Browsing Manufacturing and Materials by Subject "'Additive Manufacturing'"
Now showing 1 - 5 of 5
Results Per Page
Sort Options
Item Open Access Data underpinning "Interpass Rolling of Ti-6Al-4V Wire + Arc Additively Manufactured Features for Microstructural Refinement"(Cranfield University, 2018-02-19 16:44) Colegrove, Paul; McAndrew, AnthonyData set for grain size graphs.Item Open Access Data: Effect of substrate alloy type on the hardness profile of the substrate and deposited material interface in Aluminium Wire + Arc Additive Manufacturing(Cranfield University, 2023-08-11 16:01) Eimer, EloiseThis file provides the hardness measurements used in the paper to plot the different hardness profiles in figures 3 and 9 and the chemical composition measurement displayed in figure 10.Item Open Access Dataset for Computationally Efficient Models of High Pressure Rolling for Wire Arc Additively Manufactured Components(Cranfield University, 2021-01-04 13:51) Gornyakov, Valeriy; Sun, Yongle; Ding, Jialuo; Williams, Stewart1. Dataset for Figure 5: Equivalent plastic strain obtained along centreline on the top of the WAAM wall.2. Dataset for Figure 6: Reaction forces obtained at the rotation point of the rollers (note that only half of the WAAM component was considered in the models).3. Dataset for Figure 13: Longitudinal PS distributions on inspection planes.4. Dataset for Figure 14: Longitudinal RS distributions on inspection planes.Item Open Access Hardness profile of the interface between the substrate and deposited material in Aluminium Wire + Arc Additive Manufacturing(Cranfield University, 2023-04-13 10:32) Eimer, EloiseThis file provides the hardness measurement presented in the paper. The measurement are provided for all combination of alloy presented using the convention substrate alloy + WAAM alloy. The alloy combination are given in the sheet name.Item Open Access Remote Ultrasonic Imaging of a Wire Arc Additive Manufactured Ti-6Al-4V Component using Laser Induced Phased Array(Cranfield University, 2021-08-18 14:42) Lukacs, Peter; Williams, Stewart; Davis, Geo; Macleod, Charles; Stratoudaki, Theodosia; Gachagan, AnthonySupporting dataset for the publication: "Remote Ultrasonic Imaging of a Wire Arc Additive Manufactured Ti-6Al-4V Component using Laser Induced Phased Array".The file contains all the signals used to produce the images in the paper, using information mentioned in the paper, e.g. pitch and filter centre frequency.