Browsing by Author "Yuan, Qipeng"

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Groundwater remediation using Magnesium–Aluminum alloys and in situ layered doubled hydroxides
    (Elsevier, 2021-10-22) Zhang, Jingqi; Hu, Hanjun; Chao, Jingbo; Tang, Yang; Wan, Pingyu; Yuan, Qipeng; Fisher, Adrian C.; Coulon, Frederic; Hu, Qing; Yang, Xiao Jin
    In situ remediation of groundwater by zerovalent iron (ZVI)-based technology faces the problems of rapid passivation, fast agglomeration, limited range of pollutants and secondary contamination. Here a new concept of Magnesium–Aluminum (Mg–Al) alloys and in situ layered double hydroxides on is proposed for the degradation and removal of a wide variety of inorganic and organic pollutants from groundwater. The Mg–Al alloy provides the electrons for the chemical reduction and/or the degradation of pollutants while released Mg2+, Al3+ and OH- ions react to generate in situ LDH precipitates, incorporating other divalent and trivalent metals and oxyanions pollutants and further adsorbing the micropollutants. The Mg–Al alloy outperforms ZVI for treating acidic, synthetic groundwater samples contaminated by complex chemical mixtures of heavy metals (Cd2+, Cr6+, Cu2+, Ni2+ and Zn2+), nitrate, AsO33-, methyl blue, trichloroacetic acid and glyphosate. Specifically, the Mg–Al alloy achieves removal efficiency ≥99.7% for these multiple pollutants at concentrations ranging between 10 and 50 mg L−1 without producing any secondary contaminants. In contrast, ZVI removal efficiency did not exceed 90% and secondary contamination up to 220 mg L−1 Fe was observed. Overall, this study provides a new alternative approach to develop efficient, cost-effective and green remediation for water and groundwater.
  • Thumbnail Image
    ItemOpen Access
    Production of high‐purity hydrogen and layered doubled hydroxide by the hydrolysis of Mg‐Al alloys
    (Wiley, 2021-02-24) Zheng, Tong; Zhang, Jingqi; Tang, Yang; Wan, Pingyu; Yuan, Qipeng; Hu, Hanjun; Coulon, Frederic; Hu, Qing; Yang, Xiao Jin
    Hydrogen is becoming an important clean energy and layered doubled hydroxide (LDH) is of great interest for many applications, including water treatment, environmental remediation, and chemical catalysis. The production of high‐purity hydrogen and LDH by the hydrolysis of Mg‐Al alloys is reported. The effects of initial pH, reaction temperature, reaction time, and alloy's Mg/Al mass ratio on the rate of hydrogen generation and the purity of LDH are evaluated and the solid hydrolysis products are characterized by different techniques. The initial rate of hydrogen generation increases with decreasing initial pH and increasing reaction temperature and Mg/Al ratio while the purity of LDH increases with Mg/Al ratio, reaction temperature and time. This study may provide a new, green, and sustainable approach for storage of hydrogen and material for water treatment.