Browsing by Author "Xisto, Carlos M."

Now showing 1 - 3 of 3
  • Thumbnail Image
    ItemOpen Access
    The efficiency of a pulsed detonation combustor-axial turbine integration
    (Elsevier, 2018-09-05) Xisto, Carlos M.; Petit, Olivier; Grönstedt, Tomas; Rolt, Andrew Martin; Lundbladh, Anders; Paniagua, Guillermo
    The paper presents a detailed numerical investigation of a pulsed detonation combustor (PDC) coupled with a transonic axial turbine stage. The time-resolved numerical analysis includes detailed chemistry to replicate detonation combustion in a stoichiometric hydrogen–air mixture, and it is fully coupled with the turbine stage flow simulation. The PDC–turbine performance and flow variations are analyzed for different power input conditions, by varying the system purge fraction. Such analysis allows for the establishment of cycle averaged performance data and also to identify key unsteady gas dynamic interactions occurring in the system. The results obtained allow for a better insight on the source and effect of different loss mechanisms occurring in the coupled PDC–turbine system. One key aspect arises from the interaction between the non-stationary PDC outflow and the constant rotor blade speed. Such interaction results in pronounced variations of rotor incidence angle, penalizing the turbine efficiency and capability of generating a quasi-steady shaft torque.
  • Thumbnail Image
    ItemOpen Access
    Preliminary analysis of compression system integrated heat management concepts using LH2-based parametric gas turbine model
    (MDPI, 2022-04-14) Abedi, Hamidreza; Xisto, Carlos M.; Jonsson, Isak; Grönstedt, Tomas; Rolt, Andrew Martin
    The investigation of the various heat management concepts using LH2 requires the development of a modeling environment coupling the cryogenic hydrogen fuel system with turbofan performance. This paper presents a numerical framework to model hydrogen-fueled gas turbine engines with a dedicated heat-management system, complemented by an introductory analysis of the impact of using LH2 to precool and intercool in the compression system. The propulsion installations comprise Brayton cycle-based turbofans and first assessments are made on how to use the hydrogen as a heat sink integrated into the compression system. Conceptual tubular compact heat exchanger designs are explored to either precool or intercool the compression system and preheat the fuel to improve the installed performance of the propulsion cycles. The precooler and the intercooler show up to 0.3% improved specific fuel consumption for heat exchanger effectiveness in the range 0.5–0.6, but higher effectiveness designs incur disproportionately higher pressure losses that cancel-out the benefits.
  • Thumbnail Image
    ItemOpen Access
    Scale effects on conventional and intercooled turbofan engine performance
    (Cambridge University Press, 2017-06-08) Rolt, Andrew Martin; Sethi, Vishal; Jacob, Florian; Sebastiampillai, Joshua; Xisto, Carlos M.; Grönstedt, Tomas; Raffaelli, Lorenzo
    New commercial aero engines for 2050 are expected to have lower specific thrusts for reduced noise and improved propulsive efficiency, but meeting the ACARE Flightpath 2050 fuel-burn and emissions targets will also need radical design changes to improve core thermal efficiency. Intercooling, recuperation, inter-turbine combustion and added topping and bottoming cycles all have the potential to improve thermal efficiency. However, these new technologies tend to increase core specific power and reduce core mass flow, giving smaller and less efficient core components. Turbine cooling also gets more difficult as engine cores get smaller. The core-size-dependent performance penalties will become increasingly significant with the development of more aerodynamically efficient and lighter-weight aircraft having lower thrust requirements. In this study the effects of engine thrust and core size on performance are investigated for conventional and intercooled aeroengine cycles. Large intercooled engines could have 3%–4% SFC improvement relative to conventional cycle engines, while smaller engines may only realize half of this benefit. The study provides a foundation for investigations of more complex cycles in the EU Horizon 2020 ULTIMATE programme. This paper will be presented at the ISABE 2017 Conference, 5-8 September 2017, Manchester, UK.