Browsing by Author "Sheaf, Christopher"
Now showing 1 - 20 of 41
Results Per Page
Sort Options
Item Open Access Aerodynamic design of separate-jet exhausts for future civil aero engines, Part I: parametric geometry definition and CFD approach(ASME, 2016-03-15) Goulos, Ioannis; Stankowski, Tomasz; Otter, John; MacManus, David G.; Grech, Nicholas; Sheaf, ChristopherThis paper presents the development of an integrated approach which targets the aerodynamic design of separate-jet exhaust systems for future gas-turbine aero-engines. The proposed framework comprises a series of fundamental modeling theories which are applicable to engine performance simulation, parametric geometry definition, viscous/compressible flow solution, and Design Space Exploration (DSE). A mathematical method has been developed based on Class-Shape Transformation (CST) functions for the geometric design of axi-symmetric engines with separate-jet exhausts. Design is carried out based on a set of standard nozzle design parameters along with the flow capacities established from zero-dimensional (0D) cycle analysis. The developed approach has been coupled with an automatic mesh generation and a Reynolds Averaged Navier-Stokes (RANS) flow-field solution method, thus forming a complete aerodynamic design tool for separate-jet exhaust systems. The employed aerodynamic method has initially been validated against experimental measurements conducted on a small-scale Turbine Powered Simulator (TPS) nacelle. The developed tool has been subsequently coupled with a comprehensive DSE method based on Latin- Hypercube Sampling (LHS). The overall framework has been deployed to investigate the design space of two civil aero-engines with separate jet exhausts, representative of current and future architectures, respectively. The inter-relationship between the exhaust systems' thrust and discharge coefficients has been thoroughly quantified. The dominant design variables that affect the aerodynamic performance of both investigated exhaust systems have been determined. A comparative evaluation has been carried out between the optimum exhaust design sub-domains established for each engine. The proposed method enables the aerodynamic design of separate-jet exhaust systems for a designated engine cycle, using only a limited set of intuitive design variables. Furthermore, it enables the quantification and correlation of the aerodynamic behavior of separate-jet exhaust systems for designated civil aero-engine architectures. Therefore, it constitutes an enabling technology towards the identification of the fundamental aerodynamic mechanisms that govern the exhaust system performance for a user-specified engine cycleItem Open Access Aerodynamic design of separate-jet exhausts for future civil aero-engines, Part II: design space exploration, surrogate modeling, and optimization(American Society of Mechanical Engineers, 2016-03-15) Goulos, Ioannis; Otter, John; Stankowski, Tomaz; MacManus, David; Grech, Nicholas; Sheaf, ChristopherThe aerodynamic performance of the bypass exhaust system is key to the success of future civil turbofan engines. This is due to current design trends in civil aviation dictating continuous improvement in propulsive efficiency by reducing specific thrust and increasing bypass ratio (BPR). This paper aims to develop an integrated framework targeting the automatic design optimization of separate-jet exhaust systems for future aero-engine architectures. The core method of the proposed approach is based on a standalone exhaust design tool comprising modules for cycle analysis, geometry parameterization, mesh generation, and Reynolds-averaged Navier–Stokes (RANS) flow solution. A comprehensive optimization strategy has been structured comprising design space exploration (DSE), response surface modeling (RSM) algorithms, as well as state-of-the-art global/genetic optimization methods. The overall framework has been deployed to optimize the aerodynamic design of two civil aero-engines with separate-jet exhausts, representative of current and future engine architectures, respectively. A set of optimum exhaust designs have been obtained for each investigated engine and subsequently compared against their reciprocal baselines established using the current industry practice in terms of exhaust design. The obtained results indicate that the optimization could lead to designs with significant increase in net propulsive force, compared to their respective notional baselines. It is shown that the developed approach is implicitly able to identify and mitigate undesirable flow-features that may compromise the aerodynamic performance of the exhaust system. The proposed method enables the aerodynamic design of optimum separate-jet exhaust systems for a user-specified engine cycle, using only a limited set of standard nozzle design variables. Furthermore, it enables to quantify, correlate, and understand the aerodynamic behavior of any separate-jet exhaust system for any specified engine architecture. Hence, the overall framework constitutes an enabling technology toward the design of optimally configured exhaust systems, consequently leading to increased overall engine thrust and reduced specific fuel consumption (SFC).Item Open Access Aerodynamic effects of propulsion integration for high bypass ratio engines(AIAA, 2017-05-26) Stankowski, Tomasz; MacManus, David G.; Robinson, Matthew; Sheaf, ChristopherThis work describes the assessment of the effect of engine installation parameters such as engine position, size, and power setting on the performance of a typical 300-seater aircraft at cruise condition. Two engines with very high bypass ratio and with different fan diameters and specific thrusts are initially simulated in isolation to determine the thrust and drag forces for an isolated configuration. The two engines are then assessed in an engine–airframe configuration to determine the sensitivity of the overall installation penalty to the vertical and axial engine location. The breakdown of the interference force is investigated to determine the aerodynamic origins of beneficial or penalizing forces. To complete the cruise study, a range of engine power settings is considered to determine the installation penalty at different phases of cruise. This work concludes with the preliminary assessment of cruise fuel burn for two engines. For the baseline engine, across the range of installed positions, the resultant thrust requirement varies by 1.7% of standard net thrust. The larger engine is less sensitive with a variation of 1.3%. For an assessment over a 10,000 km cruise flight, the overall effect of the lower specific thrust engine shows that the cycle benefits of −5.8% −5.8% in specific fuel consumption are supplemented by a relatively beneficial aerodynamic installation effect but offset by the additional weight to give a −4.8% −4.8% fuel-burn reduction.Item Open Access Aerodynamic interference for aero-engine installations(AIAA, 2016-01-02) Stankowski, Tomasz P.; MacManus, David G.; Sheaf, Christopher; Grech, NicholasItem Open Access Aerodynamic optimisation of civil aero-engine nacelles by dimensionality reduction and multi-fidelity techniques(Emerald, 2022-09-30) Tejero, Fernando; MacManus, David G.; Hueso Rebassa, Josep; Sanchez Moreno, Francisco; Goulos, Ioannis; Sheaf, ChristopherPurpose - Aerodynamic shape optimisation is complex due to the high dimensionality of the problem, the associated non-linearity and its large computational cost. These three aspects have an impact on the overall time of the design process. To overcome these challenges, this paper develops a method for transonic aerodynamic design with dimensionality reduction and multi-fidelity techniques. Design/methodology/approach - The developed methodology is used for the optimisation of an installed civil ultra-high bypass ratio aero-engine nacelle. As such, the effects of airframe-engine integration are considered during the optimisation routine. The active subspace method is applied to reduce the dimensionality of the problem from 32 to 2 design variables with a database compiled with Euler CFD calculations. In the reduced dimensional space, a co-Kriging model is built to combine Euler lower-fidelity and RANS higher-fidelity CFD evaluations. Findings - Relative to a baseline aero-engine nacelle derived from an isolated optimisation process, the proposed method yielded a non-axisymmetric nacelle configuration with an increment in net vehicle force of 0.65% of the nominal standard net thrust. Originality - This work investigates the viability of CFD optimisation through a combination of dimensionality reduction and multi-fidelity method, and demonstrates that the developed methodology enables the optimisation of complex aerodynamic problems.Item Open Access Aerodynamic optimisation of civil aero-engine nacelles by dimensionality reduction and multi-fidelity techniques(Unknown, 2022-03-30) Tejero, Fernando; MacManus, David G.; Hueso Rebassa, Josep; Sanchez Moreno, Francisco; Goulos, Ioannis; Sheaf, ChristopherAerodynamic shape optimisation is complex due to the high dimensionality of the problem, the associated nonlinearity and its large computational cost. These three aspects have an impact on the overall time of the design process. To overcome these challenges, this paper develops a method for transonic aerodynamic design with dimensionality reduction and multi-fidelity techniques. It is used for the optimisation of an installed civil ultra-high bypass ratio aero-engine nacelle. As such, the effects of airframe-engine integration are considered during the optimisation routine. The active subspace method is applied to reduce the dimensionality of the problem from 32 to 2 design variables with a database compiled with Euler CFD calculations. In the reduced dimensional space, a co-Kriging model is built to combine Euler lower-fidelity and RANS higher-fidelity CFD evaluations. Relative to a baseline aero-engine nacelle derived from an isolated optimisation process, the proposed method yielded a non-axisymmetric nacelle configuration with an increment in net vehicle force of 0.65% of the nominal standard net thrust. This work demonstrates that the developed methodology enables the optimisation of complex aerodynamic problems.Item Open Access Aerodynamics of a compact nacelle at take-off conditions(IEEE, 2023-06-08) Swarthout, Avery E.; MacManus, David G.; Tejero, Fernando; Matesanz García, Jesús; Goulos, Ioannis; Boscagli, Luca; Sheaf, ChristopherNext generation ultra-high bypass ratio turbofans may have larger fan diameters than the previous generation of aircraft engines. This will potentially increase the nacelle diameter and may incur penalties to the weight and drag of the powerplant. To offset these penalties, a more compact nacelle may be used. Compact nacelles may be more sensitive to boundary layer separation at the end-of-runway conditions, particularly at an off-design windmilling operating point. Additionally, the flow separation on the external cowl surface is likely to be influenced by the integration between the powerplant, pylon and airframe. The publicly available NASA high lift common research model (HL-CRM) with take-off flap and slat settings was modified to accommodate an ultra-high bypass ratio powerplant. The powerplant has an intake, separate jet exhaust, external cowl and pylon. Boundary layer separation on the external cowl of the compact powerplant is assessed at end-of-runway rated take-off and take-off windmilling scenarios. Additionally, the lift curve and Cp distributions of the high lift common research model (HL-CRM) are compared for rated take-off and take-off windmilling engine mass flows. Overall, the nacelle boundary layer separates from the nacelle highlight at windmilling conditions when the engine mass flow is relatively low. The mechanism of separation at windmilling conditions is diffusion driven and is initiated on the nacelle aft-body. The pylon has a small impact on the overall mechanism of separation. However, the wing and high-lift devices of the HL-CRM introduce local separation on the external cowl. The HL-CRM wing with the installed powerplant stalls at a similar angle (αa/c = 16°) to the HL-CRM with the through flow nacelle available in the open literature. Compared with the nominal take-off condition, the maximum lift coefficient of the HL-CRM airframe was reduced by about 2% under windmilling engine mass flows.Item Open Access Aerodynamics of aero-engine installation(AIAA, 2016-01-02) Stankowski, Tomasz P.; MacManus, David G.; Sheaf, Christopher; Grech, NicholasSmall internal combustion engines, particularly those ranging in power from 1 kW to 10 kW, propel many remotely piloted aircraft (RPA) platforms that play an increasingly significant role in the Department of Defense. Efficiency of these engines is low compared to conventional scale engines and thermal losses are a significant contributor to total energy loss. Existing thermal energy loss models are based on data from much larger engines. Whether these loss models scale to the engine size class of interest, however, has yet to be established. The Small Engine Research Bench (SERB) was used to measure crank angle resolved gas temperature inside the combustion chamber of a small internal combustion engine (ICE). A 55 cc, two stroke, spark-ignition ICE was selected for this study. The engine was modified for optical analysis using sapphire rods 1.6 mm in diameter on opposite sides of the combustion chamber. The engine modification was found to have no measurable impact on indicated mean effective pressure or heat rejection through the cylinder. FTIR absorption thermometry was used to collect mid-infrared absorption spectra. The FTIR was allowed to scan continuously while simultaneously recording the scanning mirror position and crank angle associated with each data point, then data was re-sorted by crank angle. Measured spectra were compared with lines generated using CDSD-4000 and HITEMP line list databases. The line of best fit corresponded to the mean gas temperature through the combustion chamber. In this way temperature was determined as a function of crank angle for three operating conditions: 4,300, 6,000, and 7,500 revolutions per minute, all at wide open throttle. High cycle-to-cycle variation in the regions of combustion and gas exchange degraded temperature measurements at the affected crank angles. Future research will attempt to improve signal to noise in these measurements.Item Open Access Aerodynamics of aero-engine installation(Sage Publications, 2016-02-24) Stankowski, Tomasz P.; MacManus, David G.; Sheaf, Christopher; Christie, RobertThis paper describes current progress in the development of methods to assess aero-engine airframe installation effects. The aerodynamic characteristics of isolated intakes, a typical transonic transport aircraft as well as a combination of a through-flow nacelle and aircraft configuration have been evaluated. The validation task for an isolated engine nacelle is carried out with concern for the accuracy in the assessment of intake performance descriptors such as mass flow capture ratio and drag rise Mach number. The necessary mesh and modelling requirements to simulate the nacelle aerodynamics are determined. Furthermore, the validation of the numerical model for the aircraft is performed as an extension of work that has been carried out under previous drag prediction research programmes. The validation of the aircraft model has been extended to include the geometry with through flow nacelles. Finally, the assessment of the mutual impact of the through flow nacelle and aircraft aerodynamics was performed. The drag and lift coefficient breakdown has been presented in order to identify the component sources of the drag associated with the engine installation. The paper concludes with an assessment of installation drag for through-flow nacelles and the determination of aerodynamic interference between the nacelle and the aircraft.Item Open Access Aspects of aero-engine nacelle drag(SAGE, 2018-04-02) Robinson, Matthew; MacManus, David G.; Sheaf, ChristopherTo address the need for accurate nacelle drag estimation, an assessment has been made of different nacelle configurations used for drag evaluation. These include a sting mounted nacelle, a nacelle in free flow with an idealised, freestream pressure matched, efflux and a nacelle with a full exhaust system and representative nozzle pressure ratio. An aerodynamic analysis using numerical methods has been carried out on four nacelles to assess a near field drag extraction method using computational fluid dynamics. The nacelles were modelled at a range of aerodynamic conditions and three were compared against wind tunnel data. A comparison is made between the drag extraction methods used in the wind tunnel analysis and the chosen computational fluid dynamics approach which utilised the modified near-field method for evaluation of drag coefficients and trends with Mach number and mass flow. The effect of sting mounting is quantified and its influence on the drag measured by the wind tunnel methodology determined. This highlights notable differences in the rate of change of drag with free stream Mach number, and also the flow over the nacelle. A post exit stream tube was also found to create a large additional interference term acting on the nacelle. This term typically accounts for 50% of the modified nacelle drag and its inclusion increased the drag rise Mach number by around ΔM = 0.026 from M=0.849 M=0.849 to M=0.875 M=0.875 for the examples considered.Item Open Access Characteristics of shock-induced boundary layer separation on nacelles under windmilling diversion conditions(AIAA, 2023-06-08) Boscagli, Boscagli; MacManus, David G.; Tejero, Fernando; Sabnis, Kshitij; Babinsky, Holger; Sheaf, ChristopherThe boundary layer on the external cowl of an aero-engine nacelle under windmilling diversion conditions is subjected to a notable adverse pressure gradient due to the interaction with a near-normal shock wave. Within the context of Computational Fluid Dynamics (CFD) methods, the correct representation of the characteristics of the boundary layer is a major challenge to capture the onset of the separation. This is important for the aerodynamic design of the nacelle as it may assist in the characterization of candidate designs. This work uses experimental data obtained from a quasi-2D rig configuration to provide an assessment of the CFD methods typically used within an industrial context. A range of operating conditions is investigated to assess the sensitivity of the boundary layer to changes in inlet Mach number and mass flow through a notional windmilling engine. Fully turbulent and transitional boundary layer computations are used to determine the characteristics of the boundary layer and the interaction with the shock on the nacelle cowl. The correlation between the onset of shock induced boundary layer separation and pre-shock Mach number is assessed and the boundary layer integral characteristics ahead of the shock and the post-shock recovery evaluated and quantified. Overall, it was found that the CFD is able to discern the onset of boundary layer separation for a nacelle under windmilling conditions.Item Open Access Characteristics of shock-induced boundary-layer separation on nacelles under windmilling diversion conditions(AIAA, 2023-11-02) Boscagli, Luca; MacManus, David; Tejero, Fernando; Sabnis, Kshitij; Babinsky, H.; Sheaf, ChristopherThe boundary layer on the external cowl of an aeroengine nacelle under windmilling diversion conditions is subjected to a notable adverse pressure gradient due to the interaction with a near-normal shock wave. Within the context of computational fluid dynamics (CFD) methods, the correct representation of the characteristics of the boundary layer is a major challenge in capturing the onset of the separation. This is important for the aerodynamic design of the nacelle, as it may assist in the characterization of candidate designs. This work uses experimental data obtained from a quasi-2D rig configuration to provide an assessment of the CFD methods typically used within an industrial context. A range of operating conditions are investigated to assess the sensitivity of the boundary layer to changes in inlet Mach number and mass flow through a notional windmilling engine. Fully turbulent and transitional boundary-layer computations are used to determine the characteristics of the boundary layer and the interaction with the shock on the nacelle cowl. The correlation between the onset of shock-induced boundary-layer separation and the preshock Mach number is assessed, and it was found that the CFD is able to discern the onset of boundary-layer separation.Item Open Access Civil turbofan engine exhaust aerodynamics: impact of bypass nozzle after-body design(Elsevier, 2017-09-11) Goulos, Ioannis; Stankowski, Tomasz; MacManus, David G.; Woodrow, Philip; Sheaf, ChristopherIt is envisaged that the next generation of civil large turbofan engines will be designed for greater bypass ratios when compared to contemporary architectures. The underlying motivation is to reduce specific thrust and improve propulsive efficiency. Concurrently, the aerodynamic performance of the exhaust system is anticipated to play a key role in the success of future engine architectures. The transonic flow topology downstream of the bypass nozzle can be significantly influenced by the after-body geometry. This behavior is further complicated by the existence of the air-flow vent on the nozzle after-body which can have an impact on the performance of the exhaust system. This paper aims to investigate the aerodynamics associated with the geometry of the bypass nozzle after-body and to establish guidelines for the design of separate-jet exhausts with respect to future large turbofan engines. A parametric geometry definition has been derived based on Class-Shape Transformation (CST) functions for the representation of post-nozzle-exit components such as after-bodies, plugs, and air-flow vents. The developed method has been coupled with an automatic mesh generation and a Reynolds Averaged Navier–Stokes (RANS) flow solution method, thus devising an integrated aerodynamic design tool. A cost-effective optimization strategy has been implemented consisting of methods for Design Space Exploration (DSE), Response Surface Modeling (RSM), and Genetic Algorithms (GAs). The combined approach has been deployed to explore the aerodynamic design space associated with the bypass nozzle after-body geometry for a Very High Bypass Ratio (VHBR) turbofan engine with separate-jet exhausts. A detailed investigation has been carried out to expose the transonic flow mechanisms associated with the effect of after-body curvature combined with the impact of the air-flow vent. A set of optimum curved after-body geometries has been obtained, with each subsequently compared against their respective conical representation. The obtained results suggest that no significant performance improvements can be obtained through curving the nozzle after-body relative to the case of a conical design. However, it is shown that the application of surface curvature has the potential to unlock new parts in the design space that allow analysts to reduce the required after-body length without any loss in aerodynamic performance. The developed approach complements the existing tool-set of enabling technologies for the design and optimization of future large aero-engines, consequently leading to increased thrust and reduced Specific Fuel Consumption (SFC).Item Open Access A comparative assessment of multi-objective optimisation methodologies for aero-engine nacelles(ICAS, 2022-09-09) Swarthout, Avery; MacManus, David; Tejero, Fernando; Matesanz García, Jesús; Boscagli, Luca; Sheaf, ChristopherThere are significant environmental and economic drivers for the development of more fuel-efficient commercial aircraft engines. The propulsive efficiency benefits of ultra-high bypass ratio turbofans may be counteracted by the drag and weight penalty associated with larger nacelles. A more compact nacelle design may therefore be necessary to reduce these penalties. However, increasing compactness also increases the sensitivity of the nacelle to boundary layer separation under off-design windmilling conditions. This paper investigates methods for incorporating windmilling considerations alongside design point requirements within a multi-objective, multi-point optimisation. Windmilling under aircraft diversion and at the end-of-runway (EoR) condition are considered. The windmilling conditions are assessed through a combination of regression and classification type criteria. The transonic aerodynamics of the nacelle at the design point are notably different from the transonic characteristics at the diversion windmilling conditions. Meanwhile, the aerodynamics, and separation mechanisms, at the end-of-runway condition are dominated by subsonic diffusion. Overall, a combination of regression and classification mechanisms are found to be most suitable for the nacelle optimization as it delivers a design population which is favorably balanced between robustness against boundary layer separation as well as delivering nacelle drag benefits.Item Open Access Deep-learning for flow-field prediction of 3D non-axisymmetric aero-engine nacelles(AIAA, 2023-06-08) Tejero, Fernando; MacManus, David; Matesanz García, Jesús; Boscagli, Luca; Hueso Rebassa, Josep; Sheaf, ChristopherComputational fluid dynamics (CFD) methods have been widely used for the design and optimisation of complex non-linear systems. Within this context, the overall process can typically have a large computational overhead. For preliminary design studies, it is important to establish design capabilities that meet the usually conflicting requirements of rapid evaluations and accuracy. Of particular interest is the aerodynamic design of components or subsystems within the transonic range. This can pose notable challenges due to the non-linearity of this flow regime. There is a need to develop low order models for future civil aero-engine nacelle applications. The aerodynamics of compact nacelles can be sensitive to changes in geometry and operating conditions. For example, within the cruise segment different flow-field characteristics may be encountered such as shock-wave boundary layer interaction or shock induced separation. As such, an important step in the successful design of these new architectures is to develop methods for fast and accurate flow-field prediction. This work studies two different metamodelling approaches for flow-field prediction of 3D non-axisymmetric nacelles. Firstly, a reduced order model based on an artificial neural network (ANN) is considered. Secondly, a low order model that combines singular value decomposition and an artificial neural network (SVD+ANN) is investigated. Across a wide geometric design space, the ANN and SVD+ANN methods have an overall uncertainty in the isentropic Mach number prediction of about 0.02. However, the ANN approach has better capabilities to predict pre-shock Mach numbers and shock-wave locations.Item Open Access Deep-learning methods for non-linear transonic flow-field prediction(AIAA, 2023-05-08) Sureshbabu, Sanjeeth; Tejero, Fernando; Sánchez Moreno, Francisco; MacManus, David; Sheaf, ChristopherIt is envisaged that the next generation of ultra-high bypass ratio engines will use compact aero-engine nacelles. The design and optimisation process of these new configurations have been typically driven by numerical simulations, which can have a large computational cost. Few studies have considered the nacelle design process with low order models. Typically these low order methods are based on regression functions to predict the nacelle drag characteristics. However, it is also useful to develop methods for flow-field prediction that can be used at the preliminary design stages. This paper investigates an approach for the rapid assessment of transonic flow-fields based on convolutional neural networks (CNN) for 2D axisymmetric aeroengine nacelles. The process is coupled with a Sobel filter for edge detection to enhance the accuracy in the prediction of the shock wave location. Relative to a baseline CNN built with guidelines from the open literature, the proposed method has a 75% reduction in the mean square error for Mach number prediction. Overall, the presented method enables the fast prediction of the flow characteristics around civil aero-engine nacelles.Item Open Access Design of a quasi-2D rig configuration to assess nacelle aerodynamics under windmilling conditions(AIAA, 2023-06-08) Boscagli, Luca; Tejero, Fernando; Swarthout, Avery; MacManus, David G.; Sabnis, Kshitij; Babinsky, Holger; Sheaf, ChristopherAero-engine nacelles are typically designed to fulfil both design and off-design aircraft manoeuvres. Under-off design conditions one of the objective is to avoid large flow separation either on the external cowl or within the intake that can influence aircraft and engine operability. One particular scenario is represented by a low engine mass flow regime associated with one inoperative engine, also known as a windmilling condition. Under windmilling, the boundary layer on the external cowl of the nacelle can separate either due to the interaction with shockwaves or due to notable adverse pressure gradient towards the trailing edge. Both mechanisms are computationally difficult to model and there is a need for more validation of computational fluid dynamics (CFD) methods. The aim of this work is to develop a rig configuration which will provide CFD validation data for the aerodynamics of a nacelle under representative windmilling conditions. Two flight regimes are considered, namely windmilling diversion and end-of-runway. CFD simulations of a 3D nacelle are used to determine primary aerodynamic mechanisms associated with boundary layer separation. Two rig configurations are developed and both 2D and 3D CFD analyses are used to achieve the design objectives. Overall, this work presents the design philosophy and methods that were pursued to develop a quasi-2D rig configuration representative of the aerodynamics of 3D-annular aero-engine nacelles under windmilling conditions.Item Open Access Design optimisation of non-axisymmetric exhausts for installed civil aero-engines(Elsevier, 2023-10-31) Hueso Rebassa, Josep; MacManus, David; Tejero, Fernando; Goulos, Ioannis; Sánchez-Moreno, F.; Sheaf, ChristopherFuture civil aero-engines are likely to operate with higher bypass-ratios (BPR) than current power-plants to improve propulsive efficiency and reduce specific thrust. This will probably be accompanied by an increase of fan diameter and size of the power plant. Consequently, future configurations are likely to require more close-coupled installations with the airframe due to structural and ground clearance requirements. This tendency may lead to an increase in the adverse installation effects which could be mitigated with non-axisymmetric exhausts. However, due to the prohibitive computational cost, limited regions of the design space have been studied. For this reason, a relatively low-cost design approach for the integrated system is required. The aim of this work is to establish a method to map the non-axisymmetric exhaust design space where the effects of the propulsion system installation are taken into account. The methodology relies on the generation of a design database using inviscid computational fluid dynamics (CFD) methods. This is used to characterise the design space, identify the dominant design parameters and build response surface models for optimisation. The candidate designs that arise from the optimisation are assessed with viscous CFD simulations to assess the aerodynamic mechanisms and performance characteristics. The result is a set of design recommendations for installed configurations with non-axisymmetric exhausts. The method is an enabler for the optimisation of installed propulsion systems and has provided an exhaust design with a 0.7% improvement on net vehicle force relative to an axisymmetric exhaust, for a close coupled configuration where the fan cowl is overlapped with the wing. A reduction in net vehicle force is expected to lead to a similar reduction in cruise fuel burn.Item Open Access Design optimisation of separate-jet exhausts for the next generation of civil aero-engines(ISABE, 2017-09-08) Goulos, Ioannis; Otter, John J.; Stankowski, Tomasz; MacManus, David G.; Grech, Nicholas; Sheaf, ChristopherThis paper presents the development and application of a computational framework for the aerodynamic design of separate-jet exhaust systems for Very-High-Bypass-Ratio (VHBR) gas-turbine aero-engines. An analytical approach is synthesised comprising a series of fundamental modelling methods. These address the aspects of engine performance simulation, parametric geometry definition, viscous/compressible flow solution, design space exploration, and genetic optimisation. Parametric design is carried out based on minimal user-input combined with the cycle data established using a zero-dimensional (0D) engine analysis method. A mathematical approach is developed based on Class-Shape Transformation (CST) functions for the parametric geometry definition of gas-turbine exhaust components such as annular ducts, nozzles, after-bodies, and plugs. This proposed geometry formulation is coupled with an automated mesh generation approach and a Reynolds Averaged Navier–Stokes (RANS) flow-field solution method, thus forming an integrated aerodynamic design tool. A cost-e ective Design Space Exploration (DSE) and optimisation strategy has been structured comprising methods for Design of Experiment (DOE), Response Surface Modelling (RSM), as well as genetic optimisation. The integrated framework has been deployed to optimise the aerodynamic performance of a separate-jet exhaust system for a large civil turbofan engine representative of future architectures. The optimisations carried out suggest the potential to increase the engine’s net propulsive force compared to a baseline architecture, through optimum re-design of the exhaust system. Furthermore, the developed approach is shown to be able to identify and alleviate adverse flow-features that may deteriorate the aerodynamic behaviour of the exhaust system.Item Open Access Design optimisation of separate-jet exhausts with CFD in-the-loop and dimensionality reduction techniques(AIAA, 2024-01-04) Hueso-Rebassa, Josep; MacManus, David G.; Tejero, Fernando; Goulos, Ioannis; Abdessemed, Chawki; Sheaf, ChristopherFor Ultra-High Bypass Ratio aero-engines, the exhaust system is likely to play a significant role on the aerodynamics and performance of the aircraft. For this reason, relatively rapid methods for the aerodynamic design and optimisation of exhaust systems are required to inform design decisions at early stages of the design process. Previous exhaust optimisation works encompassed Response Surface Model (RSM) based optimisations of nozzle configurations that were parametrised with a significant number of design variables. The RSM were constructed with a large database of designs that were assessed with fine computational meshes and well resolved boundary layers. However, the large number of design variables and the computational cost required to evaluate each exhaust design limited the optimisation capabilities. This work develops a relatively more rapid exhaust optimisation method based on CFD in-the-loop and dimensionality reduction. The methodology is based on coarse meshes and wall functions to guide the optimisation process and is coupled with methods for the identification of the dominant design variables. For an UHBR aero-engine exhaust design space of 16 design variables, it was found that the velocity coefficient could be characterised with only seven parameters. Based on these results, various optimisation methods were developed and applied. These targeted the maximisation of the velocity coefficient by optimising just the 7 dominant design variables. With these approaches, a similar benefit in exhaust performance relative to the baseline optimisation method was obtained approximately 4 times faster.
- «
- 1 (current)
- 2
- 3
- »