Browsing by Author "Powell, Daniel"
Now showing 1 - 5 of 5
Results Per Page
Sort Options
Item Open Access Doping with Tungsten - Bad for Humans, Great for Tanks(Cranfield University, 2022-01-11T15:44:28Z) Powell, DanielThe distribution of energy within an armour system is a fundamental principle. The joining of the hard disruptive outer layer and soft absorbing backing layer is often a source of weakness in armour systems, causing premature failure and thus defeat of the armour. Novel adhesive techniques to join these thin layers together could have a greater impact on the armour performance with minimal additional weight. Doping epoxy with tungsten powder is one such technique that is currently being considered.Item Open Access Novel Ceramic Armour for Land Vehicles: Identifying the Chink in our Knowledge(Cranfield University, 2020-11-30 16:58) Powell, DanielVehicle armour is a complex multi-material system, typically comprising of both ceramics and metals. It must meet highly demanding performance criteria; resistance to penetration (often at incredibly high strain rates) must be maximised whilst weight and encumbrance must be minimised. The principles of armour are well-established, although much of the science is under-researched. Some notable knowledge gaps are the adjoining between the ceramic and metal at the interface, the transmission of energy through this interface and how this contributes to armour being defeated. This project aims to further investigate and understand what happens at this interface, ultimately intending to optimise future armour systems. This is to be achieved through computational modelling, initially investigating different combinations of materials and interlayer thicknesses. These models can then be validated against basic ballistic test data, replicating the conditions of the simulations. Once validated, the models can test innovative and non-conventional interlayer geometries, thickness and material combinations, highlighting promising avenues of further research. Whilst still in the infancy of this research, a spreadsheet has been created to allow the visualisation of damaging shock waves through user-defined materials, layer thicknesses and projectile materials. Once validated, it is intended to make this accessible to the wider scientific community.Item Open Access Visualising penetration in armour(Cranfield University, 2022-01-11T15:45:37Z) Powell, DanielThe human eye, CT scanning, X-ray radiography and Computer Aided Design (CAD) can all be used to visualise penetration in armour systems. This digital image demonstrates how these advanced techniques help us see a story that often seems non-existent to the human eye. X-ray radiography in the x and y axis paired with subsequent computer modelling allows the recreation of the crater and embedded material in 3D, enabling detailed analysis of the armour penetration. The volume of penetration can be measured with 95% accuracy from this CAD model when compared to the more expensive and complex, yet highly accurate, CT scanning. This demonstrates the reliability of this relatively simple and accessible methodology for quantifying damage in armour systems.Item Open Access Visualising penetration in armour(Cranfield University, 2022-01-11T15:50:02Z) Powell, DanielThe human eye, CT scanning, X-ray radiography and Computer Aided Design (CAD) can all be used to visualise penetration in armour systems. This digital image demonstrates how these advanced techniques help us see a story that often seems non-existent to the human eye. X-ray radiography in the x and y axis paired with subsequent computer modelling allows the recreation of the crater and embedded material in 3D, enabling detailed analysis of the armour penetration. The volume of penetration can be measured with 95% accuracy from this CAD model when compared to the more expensive and complex, yet highly accurate, CT scanning. This demonstrates the reliability of this relatively simple and accessible methodology for quantifying damage in armour systems.Item Open Access Visualising the Dispersion of Particles Within a Functionally Graded Material(Cranfield University, 2022-11-22T14:40:10Z) Powell, DanielFunctionally graded materials (FGMs) are designed to carefully alter material properties along a selected axis. This image shows FGMs created through mixing varying percentage volumes of high-density tungsten powder (in orange) with a low-viscosity epoxy (in white). Black regions show pores. As the epoxy cures the tungsten particles settle at various depths under gravity, notably in the 1%, 5% and 10% samples. Whilst there are multiple uses for FGMs, this research investigates if they could control the passage of damaging shock waves through a ceramic armour system, especially at the interlayer between a ceramic and metal.