Browsing by Author "Pierce, S. Gareth"
Now showing 1 - 1 of 1
Results Per Page
Sort Options
Item Open Access Development of a phased array ultrasound roller probe for inspection of wire + arc additive manufactured components(Elsevier, 2022-06-25) Vithanage, Randika K. W.; Mohseni, Ehsan; Lines, David; Loukas, Charalampos; Foster, Euan; MacLeod, Charles N.; Pierce, S. Gareth; Gachagan, Anthony; Ding, Jialuo; Williams, StewartThe wire + arc additive manufacturing (WAAM) process, which combines an electric arc as a heat source and metal wire as feedstock is proving to be very effective when producing medium to large scale metal components. The non-destructive testing (NDT) of WAAM parts, while they are being produced, provides early intervention opportunities to rectify manufacturing nonconformities and to perform in-process quality assurance of the parts. This attracts a significant amount of material, time and cost savings. Therefore, this paper presents the research, development and validation of a high temperature phased array ultrasound testing (PAUT) roller probe to perform robotically delivered in-process NDT of WAAM components. The experimental results confirm that the PAUT roller probe can endure surface temperatures up to 350 °C, can be autonomously deployed via a robotic arm and can detect 1 mm diameter flat-bottom holes located 6 mm, 9 mm and 12 mm deep under the unmachined surface of a Ti-6Al-4V WAAM calibration block.