Browsing by Author "Patsias, S."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Open Access Impact hammer-based analysis of nonlinear effects in bolted lap joint(Katholieke Universiteit Leuven, 2016-10-01) Titurus, Brano; Yuan, Jie; Patsias, S.; Pattison, S.This work presents an experimental investigation into the dynamic behavior of a bolted joint beam configuration. The impact hammer is chosen as an alternative to classical harmonic excitation methods. The structural responses are explored for a range of the joint tightening toques and various levels of impulse hammer excitations. A symmetric beam assembly made of two nominally identical steel beams is studied. Symmetric modes are found to be sensitive to the test parameters. For given torque, impact-based varying joint loading conditions are used to induce the nonlinear joint effects. A linear data processing strategy is used to observe the nonlinear behavior indirectly. The dynamic joint behavior is described in the form of the modal frequency-damping ratio performance maps represented by the two-parametric approximating quadratic response surface models. This model maps the joint conditions on the corresponding dynamic characteristics of interest and it will serve as a basis for the parametric linear joint model developmentItem Open Access Novel frame model for mistuning analysis of bladed disc systems(American Society of Mechanical Engineers (ASME), 2017-03-06) Yuan, Jie; Scarpa, F.; Titurus, B.; Allegri, Giuliano; Patsias, S.; Rajasekaran, R.The work investigates the application of a novel frame model to reduce the computational cost of the mistuning analysis of bladed disc systems. A full-scale finite element (FE) model of the bladed disc is considered as benchmark. The single blade frame configuration is identified via an optimization process. The individual blades are then assembled by 3D springs, whose parameters are determined via calibration process. The dynamics of the novel beam frame assembly is also compared to those obtained from three state-of-the-art FE-based reduced order models (ROMs): a lumped parameter approach; a Timoshenko beam assembly, and component mode synthesis (CMS) based techniques with free and fixed interfaces. The development of these classical ROMs to represent the bladed disc is also addressed in detail. A methodology to perform the mistuning analysis is then proposed and implemented. A comparison of the modal properties and forced response dynamics between the aforementioned ROMs and the full-scale FE model is presented. The case study demonstrates that the beam frame assembly can predict the variations of the blade amplitude factors with results being in agreement with the full-scale FE model. The CMS based ROMs underestimate the maximum amplitude factor, while the results obtained from beam frame assembly are generally conservative. The beam frame assembly is 4 times more computationally efficient than the CMS fixed-interface approach. This study proves that the beam frame assembly can efficiently predict the mistuning behavior of bladed discs when low order modes are of interest.