Browsing by Author "Li, Shipeng"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Open Access Effects of contact friction and ply blocking on the crush behaviour of thin-walled composite structures: a numerical study(Elsevier, 2022-10-18) Liu, Haibao; Zhou, Jin; Zhang, Di; Li, Shipeng; Giannopoulos, Ioannis K.The present paper presents a three-dimensional composite damage model for predicting the crush response of thin-walled structures, i.e., cylindrical tubes, manufactured employing fibre-reinforced polymer–matrix composites. This computational model is based upon a Continuum Damage Mechanics (CDM) approach and accounts for both the intralaminar and interlaminar damage as well as nonlinear behaviour that occur in the composite materials. Experimental data, obtained from published literature, are employed to validate the proposed composite damage model. A comparison between the experimental and computationally predicted results, including the load response, energy absorption and damage morphology, shows good agreement. Subsequently, the validated computational model is employed to investigate the effects of contact friction and ply blocking on the crush response of thin-walled composite structures. The results reveal that the friction between the tube/platen surfaces has a positive effect on the crushing performance of the composite structures and the ply blocking can somehow inhibit the crushing performance of the investigated composite structures.Item Open Access Effects of fiber orientation on tool wear evolution and wear mechanism when cutting carbon fiber reinforced plastics(Elsevier, 2022-09-07) Wu, Weizhou; Li, Shipeng; Qin, Xuda; Liu, Wentao; Cui, Xin; Li, Hao; Shi, Mengrui; Liu, HaibaoThe aim of the present paper is to reveal the influence of different fiber orientations on the tool wear evolution and wear mechanism. Side-milling experiments with large-diameter milling tools are conducted. A finite element (FE) cutting model of carbon fiber reinforced plastics (CFRP) is established to get insight into the cutting stress status at different wear stages. The results show that different fiber orientations bring about distinct differences in the extent, profile and mechanism of tool wear. Severer wear occurs when cutting 45° and 90° plies, followed by 0°, correspondingly, the least wear is obtained when θ = 135° (θ represents the orientation of fibers). Moreover, the worn profiles of cutting tools when θ = 0° and 45° are waterfall edge, while round edge occurs when θ = 135° and a combined shape of waterfall and round edge is obtained when θ = 90°. The wear mechanisms under different fiber orientations are strongly dependent on the cutting stress distributions. The evolution of tool wear profile is basically consistent with the stress distribution on the tool surface at different wear stages, and the extent of tool wear is determined by the magnitude of stress on the tool surface. Besides, the worn edges produce an actual negative clearance angle, which decreases the actual cutting thickness and leads to compressing and bending failure of fibers beneath the cutting region as well as low surface qualities.Item Open Access Fracture behaviour of fibre-reinforced composite materials subjected to shear loading: an experimental and numerical study(Elsevier, 2022-09-09) Liu, Haibao; Zhou, Jin; Kong, Xiangshao; Li, ShipengCompared to fibre-dominated behaviour, a response dominated by the matrix under shear loading can considerably limit the load-bearing capability and restrict the utilisation of composite materials. It is therefore practically significative to understand the shear response of composite materials. This paper presents a detailed experimental and numerical investigation on the fracture behaviour of composite laminates subjected to shear-dominated loading. Composite specimen with a lay-up of [(0/90)4/0]S are tested using the V-Notched Rail (VRS) shear test method. Subsequently, the Scanning Electron Microscope (SEM) investigation is also conducted on the fracture surfaces of the tested specimens to get insights into the damage mechanisms due to shear loading. In addition, a high-fidelity computational damage model is developed to predict the shear fracture behaviour of fibre-reinforced composites. Simulation results, including loading response, strain distribution and shear fracture, well correlated with experimental results, which demonstrates the predictive capability of the developed elastic-plastic damage model.Item Open Access Optimization of multi-tooth milling tool for interlaminar damage suppression in the milling of carbon fiber–reinforced polymers(Springer, 2022-05-27) Liu, Jian; Tang, Xinkai; Li, Shipeng; Qin, Xuda; Li, Hao; Wu, Weizhou; Srijana, Yadav; Liu, Wentao; Liu, HaibaoCarbon fiber–reinforced polymers (CFRP) are widely utilized in the aerospace field due to their significant specific strength, specific modulus, and strong design ability. However, anisotropy and low interlaminar bonding strength lead to burr, tear, lamination, and other damages in CFRP machining. In this paper, a 3D finite element model for the milling of CFRP was carefully developed, and the cutting forces, the interlaminar stress, and the interlaminar damage were properly obtained. Typically based on the developed model, the effects of geometric parameters of the multi-tooth milling tool were precisely analyzed. Next tool geometries were optimized for suppressing the interlaminar damage in the milling of CFRP. Results convincingly show that the multi-tooth milling tool with the geometry of 1.4 mm length of the micro tooth, 38.2° left helix angle, 11 left-handed chip grooves, 15° right helix angle, 12 right-handed helix grooves, approximately rectangular of section shape of the chip groove, 10° rake angle, and 15° clearance angle efficiently delivers the optimal performance. Besides, cutting performance of numerous coated tools was also studied. Results typically show that the multi-tooth milling tool with a diamond coating maintains significant advantages in aspects of the tool life and costs compared with the uncoated and diamond-like carbon coating (DLC)-coated tools.