Browsing by Author "Lafiosca, Pasquale"

Now showing 1 - 5 of 5
  • Thumbnail Image
    ItemOpen Access
    Aircraft skin inspections: towards a new model for dent evaluation
    (British Institute of Non-destructive Testing, 2023-07-01) Lafiosca, Pasquale; Fan, Ip-Shing; Avdelidis, Nicolas Peter
    The aircraft maintenance, repair and overhaul (MRO) industry is gradually switching to 3D scanning for dent inspection. High-accuracy devices allow for quick and repeatable measurements, which translate into efficient reporting and more objective damage evaluations. However, the potential of 3D scanners is far from being exploited. This is due to the traditional way in which the structural repair manual (SRM) deals with dents, that is, considering length, width and depth as the only relevant measures. Being equivalent to describing a dent similarly to a 'box', the current approach discards any information about the actual shape. This leads to a high degree of ambiguity, with very different shapes (and corresponding fatigue life) being classified as the same, and nullifies the effort of acquiring such a great amount of information from high-accuracy 3D scanners. In this paper, a seven-parameter model is proposed to describe the actual dent shape, thus enabling the exploitation of the high-fidelity data produced by 3D scanners. The compact set of values can then be compared against historical data and structural evaluations based on the same model. The proposed approach has been evaluated in both simulations and point cloud data generated by 8tree's dentCHECK tool, suggesting an increased capability in the evaluation of damage, enabling more targeted interventions and, ultimately, saving costs.
  • Thumbnail Image
    ItemOpen Access
    Automated aircraft dent inspection via a modified Fourier transform profilometry algorithm
    (MDPI, 2022-01-07) Lafiosca, Pasquale; Fan, Ip-Shing; Avdelidis, Nicolas Peter
    The search for dents is a consistent part of the aircraft inspection workload. The engineer is required to find, measure, and report each dent over the aircraft skin. This process is not only hazardous, but also extremely subject to human factors and environmental conditions. This study discusses the feasibility of automated dent scanning via a single-shot triangular stereo Fourier transform algorithm, designed to be compatible with the use of an unmanned aerial vehicle. The original algorithm is modified introducing two main contributions. First, the automatic estimation of the pass-band filter removes the user interaction in the phase filtering process. Secondly, the employment of a virtual reference plane reduces unwrapping errors, leading to improved accuracy independently of the chosen unwrapping algorithm. Static experiments reached a mean absolute error of ∼0.1 mm at a distance of 60 cm, while dynamic experiments showed ∼0.3 mm at a distance of 120 cm. On average, the mean absolute error decreased by ∼34%, proving the validity of the proposed single-shot 3D reconstruction algorithm and suggesting its applicability for future automated dent inspections.
  • Thumbnail Image
    ItemOpen Access
    Defects recognition algorithm development from visual UAV inspections
    (MDPI, 2022-06-21) Avdelidis, Nicolas Peter; Tsourdos, Antonios; Lafiosca, Pasquale; Plaster, Richard; Plaster, Anna; Droznika, Mark
    Aircraft maintenance plays a key role in the safety of air transport. One of its most significant procedures is the visual inspection of the aircraft skin for defects. This is mainly carried out manually and involves a high skilled human walking around the aircraft. It is very time consuming, costly, stressful and the outcome heavily depends on the skills of the inspector. In this paper, we propose a two-step process for automating the defect recognition and classification from visual images. The visual inspection can be carried out with the use of an unmanned aerial vehicle (UAV) carrying an image sensor to fully automate the procedure and eliminate any human error. With our proposed method in the first step, we perform the crucial part of recognizing the defect. If a defect is found, the image is fed to an ensemble of classifiers for identifying the type. The classifiers are a combination of different pretrained convolution neural network (CNN) models, which we retrained to fit our problem. For achieving our goal, we created our own dataset with defect images captured from aircrafts during inspection in TUI’s maintenance hangar. The images were preprocessed and used to train different pretrained CNNs with the use of transfer learning. We performed an initial training of 40 different CNN architectures to choose the ones that best fitted our dataset. Then, we chose the best four for fine tuning and further testing. For the first step of defect recognition, the DenseNet201 CNN architecture performed better, with an overall accuracy of 81.82%. For the second step for the defect classification, an ensemble of different CNN models was used. The results show that even with a very small dataset, we can reach an accuracy of around 82% in the defect recognition and even 100% for the classification of the categories of missing or damaged exterior paint and primer and dents.
  • Thumbnail Image
    ItemOpen Access
    Rectifying homographies for stereo vision: analytical solution for minimal distortion
    (Springer, 2022-07-07) Lafiosca, Pasquale; Ceccaroni, Marta
    Stereo rectification is the determination of two image transformations (or homographies) that map corresponding points on the two images, projections of the same point in the 3D space, onto the same horizontal line in the transformed images. Rectification is used to simplify the subsequent stereo correspondence problem and speeding up the matching process. Rectifying transformations, in general, introduce perspective distortion on the obtained images, which shall be minimised to improve the accuracy of the following algorithm dealing with the stereo correspondence problem. The search for the optimal transformations is usually carried out relying on numerical optimisation. This work proposes a closed-form solution for the rectifying homographies that minimise perspective distortion. The experimental comparison confirms its capability to solve the convergence issues of the previous formulation. Its Python implementation is provided.
  • Thumbnail Image
    ItemOpen Access
    Review of non-contact methods for automated aircraft inspections
    (British Institute of Non-destructive Testing, 2020-12-01) Lafiosca, Pasquale; Fan, Ip-Shing
    Damage on the aircraft structure can be caused by lightning strikes, hail, accidental impacts or ageing. Scratches or dents on the aircraft surface are typical indications of impact damage. General visual inspection (GVI) is the primary way in which to detect such forms of damage. The inspection process is time consuming, raises safety concerns for the inspector and is subject to variations due to human factors. Significant inspection automation remains challenging, mainly because GVI requires the critical human ability to assess anomalies. Also, damage specifications in maintenance manuals are influenced by human interpretation. Some automated tools are beginning to be available for aircraft inspection checks. However, none of them are capable of replacing the inspector judgement yet. Humans still need to manually assess the location or the data generated by the tools. Their performance is also affected by different environmental conditions, materials and the overall characteristics of the damage. This review presents the main methods for non-contact visual aircraft inspection, explaining their basic working principles and limitations. Their suitability for automation in aircraft inspection is also discussed