Browsing by Author "Janjatovic, Petar"

Now showing 1 - 1 of 1
  • Thumbnail Image
    ItemOpen Access
    Suppressing the use of critical raw materials in joining of AISI 304 stainless steel using activated tungsten inert gas welding
    (MDPI, 2019-11-04) Balos, Sebastian; Dramicanin, Miroslav; Janjatovic, Petar; Zabunov, Ivan; Pilic, Branka; Goel, Saurav; Szutkowska, Magdalena
    The aim of this study was to study the influence of TiO2 coating for its efficacy during the activated-tungsten inert gas (TIG) welding and to suppress the use of consumables that are rich in critical raw materials. Post-welding penetration depth, particle size distribution, microstructure, and microhardness of welded samples were assessed. Based on these results, it was found that there is no direct correlation between the weld metal surface area and the coating. The particle size in the coating, although, seemed to have played an important role, e.g., nanoparticles resulted in an increased penetration depth and depth/width (D/W) ratio as opposed to the submicron-sized particles. The most optimal welding condition resulted when a mixture of submicron-sized and nanometric-sized particles were used. It was demonstrated by the Zeta analyser results that the micron particles rub the nanoparticles due to mechanical friction resulting in smaller oxide particle formation in the coating. Finally, the presence of Marangoni convection in TIG and reversed Marangoni convection in the activated TIG (A-TIG) process were proven by means of the microstructure analysis and measurement, which were found to be positively correlated.