Browsing by Author "Flannery, D."
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Open Access Fiber-optic chemical sensing with Langmuir-Blodgett overlay waveguides(Osa Optical Society of America, 1999-12-20T00:00:00Z) Flannery, D.; James, Stephen W.; Tatam, Ralph P.; Ashwell, Geoffrey J.Fiber-optic chemical sensing has been demonstrated with a side-polished single- mode optical fiber, evanescently coupled to chemically sensitive Langmuir- Blodgett (LB) overlay waveguides. The sensors exhibit a channel-dropping response centered on a wavelength that is dependent on the thickness and the refractive index of the overlay waveguide. It has been shown that pH-sensitive organic dyes proved to be suitable materials fur the formation of an overlay waveguide whereas LB deposition provides the required thickness control. A theoretical model of the sensor response, based on the Kramers-Kronig relations and phase matching of the guided modes within the optical fiber and overlay waveguide, shows good agreement with experimental results.Item Open Access Fibre optic chemical sensing using Langmuir-Blodgett overlay waveguides(Cranfield University, 1998-04) Flannery, D.; Tatum, R. P.; Ashwell, G. J.Fibre optic chemical sensing has been demonstrated using side-polished single mode optical bre, evanescently coupled to chemically sensitive Langmuir-Blodgett overlay waveguides. The sensors exhibit a channel dropping response centred on a wavelength dependent upon the thickness and refractive index of the overlay waveguide. It has been shown that chemically sensitive organic dyes prove to be suitable materials for forming the overlay waveguide whereas the Langmuir-Blodgett deposition technique provides the required overlay thickness control. A brief optic pH sensor has been demonstrated by depositing a merocyanine dye onto a side-polished optical fibre which exhibits a change in transmission of 9.7 ± 0.8 dB pH" at a working wavelength of 750 n and 4.2 ± 0.5 dB pH`1 at 780 nm, with a shift in the channel dropping centre wavelength of 18.8 ± 0.8 n pH`1. The response time of the sensor to a step change in pH has been measured to be ~ 20 s. The advantage of being able to chemically engineer the organic materials used to form the overlay waveguides has been demonstrated by manufacturing a second pH sensor designed to operate at longer wavelengths using a second, modified merocyanine dye. The overall wavelength response of this second sensor to pH has been shown to be non- linear but a sensitivity of 23.3 ± 0.3 n pH`l is observed over a linear region. Finally, i order to investigate the non-linear response, a computer model based on the Kramers- Kronig relations has been devised and shows good agreement with experimental values. lItem Open Access pH sensor using Langmuir-Blodgett overlays on polished optical fibers(Optical Society of America, 1997-04-15T00:00:00Z) Flannery, D.; James, Stephen W.; Tatam, Ralph P.; Ashwell, Geoffrey J.Evanescent coupling between a side-polished single-mode optical fiber and a single-mode, pH-sensitive Langmuir-Blodgett overlay is used to demonstrate an intrinsic fiber-optic pH sensor. The sensor shows a wavelength sensitivity of 18.8 ± 0.8 nm/pH and a transmission sensitivity of 9.7 ± 0.8 dB/pH when operating at 750 n