Browsing by Author "Doulgeris, Georgios C."

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Development of a Method for Enhanced Fan Representation in Gas Turbine Modeling
    (2011) Doulgeris, Georgios C.; Khaleghi, H.; Kalfas, A.; Pilidis, Pericles
    A challenge in civil aviation future propulsion systems is expected to be the integration with the airframe, coming as a result of increasing bypass ratio or above wing installations for noise mitigation. The resulting highly distorted inlet flows to the engine, make a clear demand for advanced gas turbine performance prediction models. Since the dawn of jet engine several models have been proposed and the present work comes to add a model that combines two well established compressor performance methods in order to create a quasi three dimensional representation of the fan of a modern turbofan. A streamline curvature model is coupled to a parallel compressor method, covering radial and circumferential directions respectively. Model testing has shown a close agreement to experimental data, making it a good candidate for assessing the loss of surge margin on a high bypass ratio turbofan, semi-embedded on the upper surface of a broad wing airframe.
  • Thumbnail Image
    ItemOpen Access
    Modelling & integration of advanced propulsion systems
    (Cranfield University, 2008-03) Doulgeris, Georgios C.; Pilidis, Pericles
    This research study focuses on the design of advanced propulsion cycles, having as primary design goal the improvement on noise emissions and fuel consumption. In this context, a preliminary cycle design method has been developed and applied on four novel propulsion systems; ultra high bypass ratio, recuperated, intercooled-recuperated, constant volume combustion turbofans. The analysis has shown significant improvement in jet noise, and fuel consumption, as a result of high bypass ratio. Additionally, a comparison to future fuel-optimised cycle has revealed the trade-off between noise emissions and fuel consumption, where a reduction of ~30dBs in jet noise may be achieved in the expense of ~10% increase of mission fuel. A second aspect of this study is the integration of the propulsion system for improving fan noise. A novel approach is followed, by half-embedding the turbofan in the upper surface of the wing of a Broad Delta airframe. Such an installation aids in noise reduction, by providing shielding to component (fan) noise. However, it leads to significant inlet distortion levels. In order to assess the effect of installation-born distortion on performance an enhanced fan representation model has been developed, able to predict fan and overall engine performance sensitivity to three-dimensional distorted inlet flow. This model that comprises parallel compressor theory and streamline curvature compressor modelling, has been used for proving a linear relation between the loss in fan stability margins and engine performance. In this way, the design engineer can take into consideration distortion effects on off-design performance, as early as, at the stage of preliminary cycle design.