Browsing by Author "Douglas, Philippa"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Open Access Air quality and mental health: evidence, challenges and future directions(Cambridge University Press (CUP), 2023-07-05) Bhui, Kamaldeep; Newbury, Joanne B.; Latham, Rachel M.; Ucci, Marcella; Nasir, Zaheer A.; Turner, Briony; O'Leary, Catherine; Fisher, Helen L.; Marczylo, Emma; Douglas, Philippa; Stansfeld, Stephen; Jackson, Simon K.; Tyrrel, Sean; Rzhetsky, Andrey; Kinnersley, Rob; Kumar, Prashant; Duchaine, Caroline; Coulon, FredericBackground: Poor air quality is associated with poor health. Little attention is given to the complex array of environmental exposures and air pollutants that affect mental health during the life course. Aims: We gather interdisciplinary expertise and knowledge across the air pollution and mental health fields. We seek to propose future research priorities and how to address them. Method: Through a rapid narrative review, we summarise the key scientific findings, knowledge gaps and methodological challenges. Results: There is emerging evidence of associations between poor air quality, both indoors and outdoors, and poor mental health more generally, as well as specific mental disorders. Furthermore, pre-existing long-term conditions appear to deteriorate, requiring more healthcare. Evidence of critical periods for exposure among children and adolescents highlights the need for more longitudinal data as the basis of early preventive actions and policies. Particulate matter, including bioaerosols, are implicated, but form part of a complex exposome influenced by geography, deprivation, socioeconomic conditions and biological and individual vulnerabilities. Critical knowledge gaps need to be addressed to design interventions for mitigation and prevention, reflecting ever-changing sources of air pollution. The evidence base can inform and motivate multi-sector and interdisciplinary efforts of researchers, practitioners, policy makers, industry, community groups and campaigners to take informed action. Conclusions: There are knowledge gaps and a need for more research, for example, around bioaerosols exposure, indoor and outdoor pollution, urban design and impact on mental health over the life course.Item Open Access Bioaerosol emissions from open windrow composting facilities : emission characterisation and dispersion modelling improvements(Cranfield University, 2013-06) Douglas, Philippa; Drew, Gill H.; Tyrrel, SeanBioaerosol emissions from open windrow composting facilities are becoming of increasing concern due to the negative health effects associated with bioaerosols, and the fact that emissions from open windrow facilities are not contained. Current bioaerosol monitoring techniques provide only a snapshot of bioaerosol concentrations spatially and temporally, whereas dispersion models have the potential to offer a more continual overview of bioaerosol levels, alongside existing sampling methods. However, dispersion models have not been successful at accurately predicting bioaerosol concentrations from open windrow composting facilities, generally under predicting concentrations by at least one order of magnitude. This is predominantly due to a lack of knowledge and data surrounding the complex nature of bioaerosol release and transportation, particularly when the compost is agitated. This study aimed to improve the reliability in the outputs of the ADMS dispersion model, specifically in the open windrow composting scenario, by performing several model tests alongside selected input parameter quantification improvements. This involved completing a sensitivity analysis, and a model calibration and validation specific to this scenario for the first time. Results from the sensitivity analysis showed that the use of wet and dry deposition modules is significant, and the majority of model inputs associated with the representation of the source of the emission are sensitive. These findings helped select the model input parameters for quantification improvements. Novel preliminary measurements of bioaerosol temperature, velocity and concentration at the source of composting agitation activities were completed. These values provided more accurate model inputs. Collectively, these results allowed the model to be successfully calibrated, and consequently, validated for the first time for this specific scenario, resulting in model outputs corresponding to within one order of magnitude to measured data. This has helped to generate an initial set of modelling recommendations, allowing modellers to use the ADMS dispersion model in a reliable manner, when applied to the open windrow composting scenario. Eventually, these improved model outputs may be used to predict bioaerosol exposure levels at sensitive receptors, particularly in conditions where current monitoring methods are not feasible.Item Open Access Predicting Aspergillus fumigatus exposure from composting facilities using a dispersion model: a conditional calibration and validation(Elsevier, 2017-01) Douglas, Philippa; Tyrrel, Sean F.; Kinnersley, Robert P.; Whelan, M. J.; Longhurst, Philip J.; Hansell, Anna L.; Walsh, K.; Pollard, Simon J. T.; Drew, Gillian H.Bioaerosols are released in elevated quantities from composting facilities and are associated with negative health effects, although dose-response relationships are unclear. Exposure levels are difficult to quantify as established sampling methods are costly, time-consuming and current data provide limited temporal and spatial information. Confidence in dispersion model outputs in this context would be advantageous to provide a more detailed exposure assessment. We present the calibration and validation of a recognised atmospheric dispersion model (ADMS) for bioaerosol exposure assessments. The model was calibrated by a trial and error optimisation of observed Aspergillus fumigatus concentrations at different locations around a composting site. Validation was performed using a second dataset of measured concentrations for a different site. The best fit between modelled and measured data was achieved when emissions were represented as a single area source, with a temperature of 29 °C. Predicted bioaerosol concentrations were within an order of magnitude of measured values (1000–10,000 CFU/m3) at the validation site, once minor adjustments were made to reflect local differences between the sites (r2 > 0.7 at 150, 300, 500 and 600 m downwind of source). Results suggest that calibrated dispersion modelling can be applied to make reasonable predictions of bioaerosol exposures at multiple sites and may be used to inform site regulation and operational management.Item Open Access Sensitivity of predicted bioaerosol exposure from open windrow composting facilities to ADMS dispersion model parameters(Elsevier, 2016-10-13) Douglas, Philippa; Tyrrel, Sean; Kinnersley, Robert P.; Whelan, M. J.; Longhurst, Philip J.; Walsh, K.; Pollard, Simon J. T.; Drew, Gillian H.Bioaerosols are released in elevated quantities from composting facilities and are associated with negative health effects, although dose-response relationships are not well understood, and require improved exposure classification. Dispersion modelling has great potential to improve exposure classification, but has not yet been extensively used or validated in this context. We present a sensitivity analysis of the ADMS dispersion model specific to input parameter ranges relevant to bioaerosol emissions from open windrow composting. This analysis provides an aid for model calibration by prioritising parameter adjustment and targeting independent parameter estimation. Results showed that predicted exposure was most sensitive to the wet and dry deposition modules and the majority of parameters relating to emission source characteristics, including pollutant emission velocity, source geometry and source height. This research improves understanding of the accuracy of model input data required to provide more reliable exposure predictions.