Browsing by Author "Dong, Lu"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Open Access Desulfurization using limestone during sludge incineration in a fluidized bed furnace: Increased risk of particulate matter and heavy metal emissions(Elsevier, 2020-04-03) Zha, Jianrui; Huang, Yaji; Clough, Peter T.; Dong, Lu; Xu, Ligang; Zhu, Zhicheng; Yu, MengzhuIncineration of sludge can be an effective method to minimise waste whilst producing useful heat. However, incineration can cause secondary pollution issues due to the emission of SO2, therefore a set of experiments of sludge incineration in a bubble bed furnace were conducted with limestone addition to study desulfurization of sludge incineration flue gas. As expected, over 93% emission of SO2 was reduced with limestone addition, and that of CO and NOx were increased and decreased respectively when the fuel feeding rate raised. The distribution of fly ash was also increased by raising the fuel feeding rate due to increasing fragmentation of the ash. However, distributions of PM2.5 and heavy metals in submicron particles have dramatically increased with limestone desulfurization. The mechanism was revealed by SEM and EDS statistical analysis, indicating that the reaction between aluminosilicate and calcium made particles agglomerate and eutectic mixtures form, these larger ash particles were found to divide between collection as cyclone ash and fragmentation into finer particles that bypassed the cyclone. Those fine particles provided more surface area for heavy metal condensation. Furthermore, it was found that the reaction mechanism for semi-volatile metals involved them being released from the sludge and forming PM1 particles due to the vaporization-condensation mechanism, leading to higher emission of PM1 and distribution of heavy metals in PM1. Thus, it should be considered that there may actually be higher emission risks of PM and heavy metal emissions when aiming to desulfurize a flue gas using Ca-based minerals in certain circumstancesItem Open Access Dynamic transformations of metals in the burning solid matter during combustion of heavy metal-contaminated biomass(American Chemical Society, 2021-05-10) Zha, Jianrui; Huang, Yaji; Zhu, Zhicheng; Yu, Mengzhu; Clough, Peter T.; Yan, Yongliang; Dong, Lu; Cheng, HaoqiangCombustion as an efficient and reliable method is widely used for metal-enriched biomass to achieve energy and metal recoveries, but there are emission risks of heavy metals in the flue gas and bottom ash that can give rise to secondary pollutions. To optimize such combustion processes, this work investigated the combustion characteristics of a kind of hyperaccumulator biomass and focused on the intermediate states and dynamic transformations of metals for the first time. A pseudo-in situ sampling method was used to collect the burning solid residues at different time intervals before further analysis. The conversions between elemental forms were revealed, and their conversion rates were also calculated. It was found that the transformation of metals was determined by their elemental natures, species distributions, and combustion progress where there was not a consecutive process but separated by several stages, which were related to (1) the release of volatile matters, (2) the formation and consumption of the char, and (3) the fixation by silicates. Based on the information of dynamic metal characteristics, a new strategy was proposed to optimize metal distribution by adjusting the combustion time of operations. The methodology introduced in this work will also help emission control and metal recovery for other metal-rich fuels.