Browsing by Author "Cheng, Yi-Bing"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Open Access Efficient gas adsorption using superamphiphobic porous monoliths as the under-liquid gas-conductive circuits(American Chemical Society, 2019-06-14) Wen, Min; Peng, Cheng; Yao, Ming; Wang, Chao; Ming, Tingzhen; Peng, Biaoling; Huang, Fuzhi; Zhong, Jie; Cheng, Yi-Bing; Zhang, QiThe gas–liquid membrane contactor forms a gas–solid–liquid interface and has a high potential for the applications in gas adsorption, catalysis, energy exchange, and so on. Porous superhydrophobic membranes show a great gas separation/adsorption ability. However, the complicated device architecture and the durability issue are normally concerned especially for the continuous circulation of gas and liquid. In this work, we present a free-standing gas-conductive circuit simply formed by connecting the superamphiphobic porous monoliths (SAPMs) to achieve an efficient under-liquid gas adsorption. The porous worm-like SAPM is prepared with low-temperature expandable graphite and polyvinylidenefluoride, exhibiting superamphiphobicity and superaerophilicity after fluoridation. The as-made SAPM circuits can be used as a reliable gas conductor under numerous liquids, such as water, alkaline, acidic, and oily solutions. In this work, the CO2 adsorption capacities of the SAPM circuits are evaluated under NaOH and methyldiethanolamine solutions and the mass transfer rate can reach up to 9.61 mmol m–2 s–1. Moreover, the effective human blood oxygenation process is also demonstrated using SAPM circuits. Thus, the reported SAPM provides an alternative gas–liquid exchanging method and the simplified process could be of great benefit to the cost-effectively large-scale CO2 capture or gas exchanging applications.Item Open Access High performance perovskite sub-module with sputtered SnO2 electron transport layer(Elsevier, 2019-03-13) Bai, Guangfeng; Wu, Zhengli; Li, Jing; Bu, Tongle; Li, Wangnan; Li, Wei; Huang, Fuzhi; Zhang, Qi; Cheng, Yi-Bing; Zhong, JieHybrid perovskite solar cells (PSC) have gained stupendous achievement in single/tandem solar cell, semitransparent solar cell and flexible devices. Aiming for potential commercialization of perovskite photovoltaic technology, up scalable processing is crucial for all function layers in PSC. Herein we present a study on room temperature magnetron sputtering of tin oxide electron transporting layer (ETL) and apply it in a large area PSC for low cost and continues manufacturing. The SnO2 sputtering targets with varied oxygen and deposition models are used. Specifically, the working gas ratio of Ar/O2 during the radio frequency sputtering process plays a crucial role to obtain optimized SnO2 film. The sputtered SnO2 films demonstrate similar morphological and crystalline properties, but significant varied defect states and carrier transportation roles in the PSC devices. With further modification of thickness of SnO2, the PSCs based on sputtered SnO2 ETL shows a champion efficiency of 18.20% in small area and an efficiency of 14.71% in sub-module with an aperture area of 16.07 cm2, which is the highest efficiency of perovskite sub module with sputtered ETLs.Item Open Access Robust transparent superamphiphobic coatings on non-fabric flat substrates with inorganic adhesive titania bonded silica(Royal Society of Chemistry, 2017-04-03) Wen, Min; Zhong, Jie; Shuangjie, Zhao; Bu, Tongle; Guo, Le; Ku, Zhiliang; Peng, Yong; Huang, Fuzhi; Cheng, Yi-Bing; Zhang, QiThe technological implementation of superamphiphobic surfaces has been largely hindered by the stability issues caused by surface abrasion, corrosion, contamination, etc. Robustness still remains the major challenge for a well-performing superamphiphobic coating. In this study, the simple route of spraying inks containing pre-designed silica, cetyltrimethylammonium bromide (CTAB) and titanium diisopropoxide bis-2,4-pentanedionate (TAA) is presented to prepare micro–nanostructure films. The mechanical properties of the films are significantly strengthened by titania after the pyrogenic decomposition of TAA, and the films are able to withstand a standard 2H pencil scratching and sand flow impact. The as-made films exhibit excellent super-repellency to various liquids after treatment with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS). The static contact angles (SCAs) for water (surface tension 72.1 mN m−1) and dodecane (surface tension 25.3 mN m−1) can reach 166° ± 3° and 153° ± 3°, respectively. On controlling the thickness of the films, the optical transmittance of the films (400 nm thick) can come close to that of glass. Moreover, efficient photocatalytic decomposition of an organic substance attached on the surfaces is demonstrated; this decomposition enables the recovery of the superamphiphobic property of the contaminated films. Thus, the unique properties of robustness, transparency and self-healing, etc., combined with the relatively low cost fabrication, make these superamphiphobic coatings promising in various applications.Item Open Access Sequentially reinforced additive coating for transparent and durable superhydrophobic glass(American Chemical Society, 2018-09-05) Zhao, Shuangjie; Zhao, Juan; Wen, Min; Yao, Ming; Wang, Fengjue; Huang, Fuzhi; Zhang, Qi; Cheng, Yi-Bing; Zhong, JieNow that there are various routes to prepare superhydrophobic surfaces for self-cleaning, anti-icing, liquid collecting, etc., attentions are moving toward low-cost upscaling of routes and increasing the reliability for actual applications. However, the required micro–nano structures for superhydrophobicity are light scattering and very vulnerable to abrasion. This intrinsically conflicts with the transparency and durability of superhydrophobic glass, which are the major barriers for its commercialization. In this study, we present a novel sequentially reinforced additive coating (SRAC) process to realize robust and transparent micro–nano structured film with tough intergranular sintering. A benign aqueous-based ink with poly(furfuryl alcohol) (PFA) and silica species is carefully designed and sprayed on glass to enable self-phase separation and morphology construction. The coatings reach the static contact angle (SCA) for water over 166° and withstand a 6H pencil scratching, the cross-cut test, and sand abrasion. Moreover, we also performed a 90 day outdoor performance test and the glass maintained superhydrophobicity with an SCA of 154°. These results provide a low-cost waterborne ink formula, and the high throughput and upscalable SRAC process could be a convenient technology for the fabrication of large area, robust superhydrophobic coatings.