Browsing by Author "Cenci, Steven M."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Open Access Ultrasound-induced CO2/H2O emulsions as a medium for clean product formation and separation: The barbier reaction as a synthetic example(American Chemical Society, 2014-04-03) Cenci, Steven M.; Cox, Liam R.; Leeke, Gary A.: Subcritical CO2/H2O (30 °C/80 bar) was employed as a renewable solvent mixture in a 1 dm3 ultrasound reactor. As a representative synthetic transformation, the metal-mediated Barbier allylation was used to demonstrate the facility of formation and separation of the homoallylic alcohol product. The chemoselectivity over the competing aldehyde reduction could be improved by deploying the biocompatible nonionic surfactant Tween 80, a saturated salt aqueous phase, or by carrying out the reaction at 60 °C/120 bar. All of these modifications led to an apparent rate increase in the desired allylation. A range of substituted benzaldehydes afforded the corresponding homoallylic alcohols in moderate to high yields. The presence of water constituted a necessary condition for efficient product formation, while CO2 provided an appropriate phase for clean product separation by exploiting a favorable homoallylic alcohol enrichment. In this way, 0.025 mol of homoallylic alcohol product could be isolated from the CO2 phase in 1 h, avoiding further extraction stages that would typically require organic solvents.Item Open Access Ultrasound-induced emulsification of subcritical carbon dioxide/water with and without surfactant as a strategy for enhanced mass transport(Elsevier, 2013-06-03) Cenci, Steven M.; Cox, Liam R.; Leeke, Gary A.Pulsed ultrasound was used to disperse a biphasic mixture of CO2/H2O in a 1 dm3 high-pressure reactor at 30 °C/80 bar. A view cell positioned in-line with the sonic vessel allowed observation of a turbid emulsion which lasted approximately 30 min after ceasing sonication. Within the ultrasound reactor, simultaneous CO2-continuous and H2O-continuous environments were identified. The hydrolysis of benzoyl chloride was employed to show that at similar power intensities, comparable initial rates (1.6 ± 0.3 × 10–3 s–1 at 95 W cm–2) were obtained with those reported for a 87 cm3 reactor (1.8 ± 0.2 × 10–3 s–1 at 105 W cm–2), demonstrating the conservation of the physical effects of ultrasound in high-pressure systems (emulsification induced by the action of acoustic forces near an interface). A comparison of benzoyl chloride hydrolysis rates and benzaldehyde mass transport relative to the non-sonicated, ‘silent’ cases confirmed that the application of ultrasound achieved reaction rates which were over 200 times faster, by reducing the mass transport resistance between CO2 and H2O. The versatility of the system was further demonstrated by ultrasound-induced hydrolysis in the presence of the polysorbate surfactant, Tween, which formed a more uniform CO2/H2O emulsion that significantly increased benzoyl chloride hydrolysis rates. Finally, pulse rate was employed as a means of slowing down the rate of hydrolysis, further illustrating how ultrasound can be used as a valuable tool for controlling reactions in CO2/H2O solvent mixtures.