Browsing by Author "Biglari, F."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Open Access Experimental and numerical investigation of the weld geometry effects on Type IV cracking behaviour in P91 steel(Elsevier, 2020-08-11) Mehmanparast, Ali; Yatomi, M.; Biglari, F.; Maleki, S.; Nikbin, K.The focus of the present study is on creep crack growth behaviour in Type IV region of P91 steel weldments at 650 °C. In the experimental studies on small- and large-scale single-edge notched specimens in tension, SENT, the effects of weld dimensions and specimen size on the creep crack growth behaviour of the material are investigated. The experimental results demonstrate that the crack starts to propagate at an angle normal to the loading direction, subsequently deviates towards the Type IV region and the specimen eventually ruptures when the crack growth angle becomes parallel to the loading direction. The creep rupture data for SENT specimens compared well with those of the round bar specimens for P91 welded joints. In addition, the data for crack growth rates from the deviating crack path were correlated with the C* fracture mechanics parameter and showed good agreement with standard compact tension test data. To predict the creep crack growth behaviour in the Type IV region, finite element simulations were performed in conjunction with a multiaxial ductility damage criterion at the weld/base metal interface. Given that a lower failure strain along the Type IV region is prominent, it is shown that the cracking, in line with the experiments, followed the HAZ region and led to the final creep rupture in the net sectionItem Open Access An investigation of irregular crack path effects on fracture mechanics parameters using a grain microstructure meshing technique(World Scientific Publishing, 2012-02-02) Mehmanparast, Ali; Biglari, F.; Davies, C. M.; Nikbin, Kamran;A sub-grain size finite element modelling approach is presented in this paper to investigate variations in fracture mechanics parameters for irregular crack paths. The results can be used when modelling intergranular and transgranular crack growth where creep and fatigue are the dominant failure mechanisms and their crack paths are irregular. A novel method for sub-grain scale finite element mesh consisting of multiple elements encased in ~50–150 μm-sized grains has been developed and implemented in a compact tension, C(T), mesh structure. The replicated shapes and dimensions were derived from an isotropic metallic grain structure using representative random sized grain shapes repeated in sequence ahead of the crack tip. In this way the effects of crack tip angle ahead of the main crack path can be considered in a more realistic manner. A comprehensive sensitivity analysis has been performed for elastic and elastic-plastic materials using ABAQUS and the stress distributions, the stress intensity factor and the J-integral have been evaluated for irregular crack paths and compared to those of obtained from analytical solutions. To examine the local and macroscopic graph path effects on fracture mechanics parameters, a few extreme cases with various crack-tip angles have been modelled by keeping the macroscopic crack path parallel to the axis of symmetry. The numerical solutions from these granular mesh structures have been found in relatively good agreement with analytical solutions.