Browsing by Author "Antille, Diogenes Luis"

Now showing 1 - 7 of 7
  • Thumbnail Image
    ItemOpen Access
    Effects of biosolids-derived organomineral fertilizers, urea, and biosolids granules on crop and soil established with ryegrass (Lolium perenne L.)
    (Taylor and Francis, 2014-04-25) Antille, Diogenes Luis; Sakrabani, Ruben; Godwin, Richard J.
    A pot scale trial investigated the agronomic performance of two organomineral fertilizers (OMF15—15:4:4 and OMF10—10:4:4) in comparison with urea and biosolids granules to establish ryegrass (Lolium perenne L.). Two soils of contrasting characteristics and nitrogen (N) application rates in the range of 0–300 kg ha−1 were used over a period of 3 years. Fertilizer effects were determined on: (1) dry matter yield (DMY) and crop responses, (2) nitrogen use efficiency (NUE), and (3) selected soil chemical properties. Ryegrass responded linearly (R2 ≥ 0.75; P < 0.001) to organomineral fertilizers (OMF) application increasing DMY by 2–27% compared with biosolids but to a lesser extent than urea (range: 17–55%). NUE was related to concentration of readily available N in the fertilizer: urea and OMF showed significantly (P < 0.05) greater N recoveries than biosolids. Total N in soil and soil organic matter showed increments (P < 0.05), which depended on the organic-N content in the fertilizer applied. Soil extractable P levels remained close to constant after 3 years of continuous OMF application but increased with biosolids and decreased with urea, respectively (P < 0.05). The application of biosolids changed soil P Index from 5 to 6; hence, there is a need to monitor soil P status. Both OMF10 and OMF15 formulations are suitable for application in ryegrass.
  • Thumbnail Image
    ItemOpen Access
    Field-scale evaluation of biosolids-derived organomineral fertilizers applied to winter wheat in England
    (American Society of Agronomy, 2017-02-23) Antille, Diogenes Luis; Godwin, Richard J.; Sakrabani, Ruben; Seneweerad, Saman; Tyrrel, Sean F.; Johnston, A. Edward
    Field-scale experiments in four crop seasons established the agronomic performance of biosolids-derived organomineral fertilizers (OMF) for winter wheat (Triticum aestivum L.) production in England. Two OMF formulations (OMF10 10:4:4 and OMF15 15:4:4) were compared with urea and biosolids granules (≈5:6:0.2) to determine crop responses and fertilizer effects on soil chemical properties. Fertilizers were applied at N rates between 0 and 250 kg ha–1 at regular increments of 50 kg ha–1 N. Average grain yields with OMF10 and OMF15 were higher than with biosolids granules, but lower than with urea (P < 0.05). The optimum N application rates, and corresponding grain yields, were 245 and 7900 kg ha–1 for biosolids, 257 and 9100 kg ha–1 for OMF10, 249 and 9500 kg ha–1 for OMF15, and 225 and 10350 kg ha–1 for urea, respectively. Differences in grain yield between fertilizer treatments were explained by differences in yield components, particularly number of grains and thousand-grain-weight. Grain-N recoveries were 31% for biosolids, ≈40% for OMF, and 52% for urea. Organomineral fertilizers-induced changes in soil extractable P and soil P Index were not significant. Thus, application of OMF replenished P offtake by the crop and therefore supported the choice of the proposed OMF formulations. By contrast, extractable P increased in biosolids and decreased in urea-treated soils, respectively. Heavy metals in soil were unaffected by fertilizer treatment and lower than permissible limit values. The use of OMF for winter wheat production appears to be a sustainable approach to recycling biosolids to land.
  • Thumbnail Image
    ItemOpen Access
    Formulation, utilisation and evaluation of organomineral fertilisers
    (Cranfield University, 2011-03-04) Antille, Diogenes Luis; Godwin, R. J.; Sakrabani, Ruben
    The water industry recognises significant cost advantages in recycling sewage sludge (biosolids) to agricultural land compared with alternative more expensive disposal options such as incineration or landfill. A recent technique was proposed by United Utilities plc for the production of organomineral fertilisers (OMF) from biosolids granules which adds additional nitrogen to the biosolids’ nutrients to form a balanced NPK fertiliser. The aim of this research was to determine the effects in cereal and grass crops of using organomineral fertilisers (OMF) made from nutrients-enriched biosolids granules and to contribute towards the understanding of nutrient management and dynamics in agricultural systems. The research included soil incubation, glasshouse, lysimeters and field studies which used winter wheat (Triticum aestivum L.) and ryegrass (Lolium perenne L.). A theoretical model was developed for fertiliser particle distribution studies which required the determination of key physical properties of the products. Two OMF formulations have been suggested: OMF10 and OMF15 which have the following NPK compositions: 10:4:4 and 15:4:4 respectively. These were suggested for use in grassland as well as arable cropping. The particle trajectory model showed that the particle size range for OMF10 and OMF15 should be between 1.10 and 5.50 mm and between 1.05 and 5.30 mm in diameter respectively. Cont/d.
  • Thumbnail Image
    ItemOpen Access
    An investigation into the fertilizer particle dynamics off-the-disc
    (American Society of Agricultural and Biological Engineers, 2015) Antille, Diogenes Luis; Gallar, Luis; Miller, P. C. H.; Godwin, R. J.
    The particle size range specifications for two biosolids-derived organomineral fertilizers (OMF) known as OMF10 (10:4:4) and OMF15 (15:4:4) were established. Such specifications will enable field application of OMF with spinning disc systems using conventional tramlines spacing. A theoretical model was developed, which predicts the trajectory of individual fertilizer particles off-the-disc. The drag coefficient (Cd) was estimated for small time steps (10-6 s) in the trajectory of the particle as a function of the Reynolds number. For the range of initial velocities (20 to 40 m s-1), release angles (0° to 10°) and particle densities (1000 to 2000 kg m-3) investigated, the analysis showed that OMF10 and OMF15 need to have particle diameters between 1.10 and 5.80 mm, and between 1.05 and 5.50 mm, respectively, to provide similar spreading performance to urea with particle size range of 1.00 to 5.25 mm in diameter. OMF10 and OMF15 should have 80% (by weight) of particles between 2.65 and 4.30 mm, and between 2.55 and 4.10 mm, respectively. Due to the physical properties of the material, disc designs and settings that enable working at a specified bout width by providing a small upward particle trajectory angle (e.g., 10°) are preferred to high rotational velocities. However, field application of OMF with spinning discs applicators may be restricted to tramlines spaced at a maximum of 24 m; particularly, when some degree of overlapping is required between two adjacent bouts. The performance of granular fertilizers can be predicted based on properties of the material, such as particle density and size range, using the contour plots developed in this study.
  • Thumbnail Image
    ItemOpen Access
    Nitrogen release characteristics from biosolids-derived organomineral fertilizers
    (Taylor and Francis, 2014-04-25) Antille, Diogenes Luis; Sakrabani, Ruben; Godwin, Richard J.
    This study investigated the availability of nitrogen (N) following soil application of a novel biosolids-derived organomineral fertilizer (OMF15—15:4:4) in comparison with urea (46% N). OMF15 is produced by coating biosolids granules (particle size range: 1.10–5.50 mm in diameter) with urea and potash [60% potassium oxide (K2O)], which increase the concentration of mineral N and potassium (K), respectively, resulting in a balanced fertilizer material suitable for application in cereal and grass crops. The study comprised two soil types of contrasting characteristics which were incubated over a period of 90 days at 25 °C and maintained near field capacity. Nitrogen was applied at rates equivalent to 0 (control), 150, and 300 kg ha−1, and soil mineral N measured routinely using standard laboratory techniques. Results showed that the majority of N was released from OMF15 within 30 days from application (range: 40% to 72% of total OMF15-N applied) with a further 10% to 28% in the following 60–90 days. OMF15 required an accumulated thermal time of 2250 degrees-day to release between 68% and 79% of the total OMF15-N applied. From this, it was inferred that mineralization of the organic-N fraction in OMF15 is likely to progress beyond harvest of winter cereal crops in-field conditions in England. The results of this study aided the development of fertilization strategies for the best use of OMF in winter cereal and grass crops.
  • Thumbnail Image
    ItemOpen Access
    Phosphorus release characteristics from biosolids-derived organomineral fertilizers
    (Taylor & Francis, 2014-09-25) Sakrabani, Ruben; Godwin, Richard J.; Antille, Diogenes Luis
    This study investigated the availability of phosphorus (P) following soil application of a novel biosolids-derived organomineral fertilizer (OMF15; 15:4:4) in comparison with single superphosphate (0:18:0). Two soil types of contrasting characteristics were incubated over a period of 90 days at 25 °C and maintained near field capacity. Phosphorus was applied at rates equivalent to 0 (control), 150, and 300 kg ha−1 of P2O5, respectively. Availability of P from OMF15 was low throughout the experiment accounting for less than 6.5% of total OMF15-P applied. It was shown that after the 90 days incubation period, the overall increase in soil extractable P in OMF15-treated soil was marginal in both soil types. For single superphosphate (SSP), P availability ranged from 16% to 46% of total SSP-P applied. Application of SSP increased soil extractable P levels significantly (P < 0.001) compared with unfertilized control soils. The results of this study aided the development of fertilization strategies for the best use of OMF produced from nutrient-enriched biosolids granules for applications in winter cereal and grass crops in England.
  • Thumbnail Image
    ItemOpen Access
    Soil and crop responses following application of biosolids-derived organomineral fertilisers to ryegrass (Lolium perenne L.) grown in pots
    (American Society of Agricultural and Biological Engineers, 2014-12-31) Antille, Diogenes Luis; Sakrabani, Ruben; Godwin, R.
    Biosolids-derived organomineral fertilisers (OMF) were produced using a novel technique reported in earlier studies. This technique enables addition of N and potash to biosolids granules to form a balanced NPK fertiliser. Two fertiliser products; OMF10 (10:4:4) and OMF15 (15:4:4), were formulated and tested in a glasshouse facility on pot-grown ryegrass in comparison with urea and biosolids granules at N application rates ranging from 0 to 300 kg ha-1. The aim of this research was to contribute to the understanding of nutrients management and dynamics in grass crops fertilised with OMF. The study focused upon dry matter yield (DMY) and crop responses to applied fertiliser, nitrogen use efficiency (NUE) and fertilisers’ effect on soil fertility. Results indicated that ryegrass responds linearly to application of OMF increasing DMY by about 2% to 27% compared with biosolids but to a lesser extent than urea (range: 17% to 55%). NUE was related to the concentration of readily available N in the fertiliser; urea and OMF showed significantly greater (P<0.05) N recoveries than biosolids (26% to 75%, and 19% to 29%, respectively). Total nitrogen in soil and SOM increased (P<0.05) depending on the concentration of organic-N in the fertiliser applied. DMY was lower but more sustained overtime in biosolids-treated pots. OMF application did not result in significant changes in soil extractable-P levels whereas for urea, it decreased significantly while it showed a significant increase in biosolids-treated pots, where soil-P Index changed from 5 to 6. In OMF-treated soil, soil P Index remained close to constant overtime thereby supporting the purpose of the formulations tested.