CoA. Memoranda
Permanent URI for this collection
Browse
Browsing CoA. Memoranda by Author "Darlington, M. W."
Now showing 1 - 6 of 6
Results Per Page
Sort Options
Item Open Access An apparatus for the measurement of tensile creep and contraction ratios in small non-rigid specimens(College of Aeronautics, 19) Darlington, M. W.; Saunders, D. W.An apparatus is described for precise measurement of creep properties in specimens with gauge lengths down to 1.2 cm. An extensometer has been developed which is supported independently of the specimen and exerts a load on the specimen of less than 5 grams. It can thus be used with small non-rigid specimens. The extensometer will detect strains down to 2 x 10-6. The stability is excellent. An adaptation of the system which allows simultaneous measurement of tensile strain and lateral strain during creep is also described. The apparatus was designed for the measurement of anisotropy of creep properties in oriented thermoplastics and reference to such measurements is given. It is however entirely suitable for general application to small specimens.Item Open Access Creep studies on oriented thermoplastics(College of Aeronautics, 1969) Darlington, M. W.; Saunders, D. W.The enhancement of many of the mechanical properties of thermoplastics which may be achieved by orienting the molecules has been known for some time. It has been exploited in the production of textile fibres end oriented films. Molecular orientation also occurs during processes such as extrusion, moulding or forming. Here, unless carefully controlled, it may well cause a deterioration in the properties of the finished article. In view of this a systematic study on the anisotropy of the mechanical properties of thermoplastics, resulting from molecular orientation, is being carried out at present in these laboratories … [cont.].Item Open Access The mechanical properties of anisotropic polymers: progress report no. 3(College of Aeronautics, 1967-03) Darlington, M. W.Item Open Access The mechanical properties of anisotropic polymers: progress report no. 5(College of Aeronautics, 1968-03) Darlington, M. W.A report of work carried out during the period 1st October, 1967, to 31st March, 1963.Item Open Access The mechanical properties of anisotropic polymers: Progress report no. 6(College of Aeronautics, 1968-09) Darlington, M. W.Part 1 General Developments The basic development work on the tensile creep apparatus was completed by March, 1968. A description of the latest 'heavy-duty' creep rig and two types of contraction extensometer, together with the relevant creep trials, was given in Progress Report No. 5. Since then two further 'heavy-duty' creep rigs have been assembled and tested and are now ready for use with rigid plastics. In addition, further trials of the double transducer contraction extensometer described in Report No. 5 have been carried out. These trials are described in part 2 of this report The trials were considered reasonably satisfactory and each of the three heavy-duty creep rigs has now been fitted with a device of this type in addition to the normal tensile extensometer. The polythene creep rig described in Progress Report No. 3 has been working satisfactorily for over a year and no further modifications have been made in the period under review. At the conclusion of the above-mentioned trials it was considered that the creep apparatus was unlikely to require any further major changes. A detailed report of all the apparatus has therefore been prepared with the intention of submitting it for publication to the Journal of Scientific Instruments. It is at present being examined at the Ministry of Technology. (CoA Memo. No. 158).Item Open Access The mechanical properties of anisotropic polymers: progress report no. 7(College of Aeronautics, 1969-03) Darlington, M. W.Part I General Developments The major part of the period under review was devoted to a study of the tensile creep properties of isotropic and uniaxially oriented Perspex sheets (standard grade) using the three heavy-duty creep rigs mentioned in the previous Progress Report (No. 6. September, 1968). Measurements of lateral contraction were made simultaneously with the tensile strain measurements during most of the creep tests. The creep rupture behaviour and optical anisotropy of the oriented sheets were also studied in an attempt to present a more complete picture of the behaviour of the material. Some of the early results of this work have already been published and copies sent to the Ministry. (Darlington and Saunders; 1969). Details of the complete work will be found in part II of this report. The two types of contraction extensometer described in Progress Report No. 5 were used during the Perspex studies and reasonable agreement was obtained between the results. The techniques required with the contraction devices were considerably improved during the period under review and the absolute validity of the contraction measurements is now more certain. Some comments on the general performance of the apparatus are given in section 2.8.4.