Khan, Muhammad AlJaffrey, Syed Husain ImranBaqai, Aamer AhmedKhan, Mushtaq2022-11-072022-11-072022-11-08Khan MA, Jaffery SHI, Baqai AA, Khan M. (2022) Specific cutting energy analysis of turning Ti -6Al-4V under dry, wet and cryogenic conditions. In: 11th International Conference on Through-life Engineering Services - TESConf 2022, 8-9 November 2022, Cranfield UK, Paper number 2928https://dspace.lib.cranfield.ac.uk/handle/1826/1865911th International Conference on Through-life Engineering Services - TESConf 2022, 8-9 November 2022, Cranfield UKEnergy consumption of a manufacturing system represents its sustainability and efficiency. Sustainable manufacturing processes increase the productivity by improving the input to output ratio. Machining of hard to cut alloys demands higher energy input to overcome their high strength. The energy requirement also elevates with increasing speed which becomes the limiting factor. In the present study the specific cutting energy analysis of aerospace alloy Ti -6Al-4V was carried out at different cutting speeds. Different machining environment s including wet and cryogenic media were employed in addition to dry cutting for comprehensive analysis. It was found that cryogenic conditions reduced 8% and 11 % SCE in comparison with dry and wet conditions respectively. Analysis of variance highlighted contribution ratio of cutting speed and cutting condition as 51.87% and 46.98 %, respectively.enAttribution 4.0 InternationalTi-6Al-4VCryogenic machiningSpecific cutting energyAnalysis of varianceConference paper