CERES Home
→
School of Aerospace, Transport and Manufacturing (SATM)
→
PhD and MSc by research theses (SATM)
→
Browsing PhD and MSc by research theses (SATM) by Publication Date

Browsing PhD and MSc by research theses (SATM) by Publication Date

Now showing items 21-40 of 461

Process mapping and business process re-engineering training needs analysis for ERP system providers.

Obibi, Ndidi Ogechi (2002)

This thesis presents the results of a collaborative research project and documents a process mapping exercise on Training Needs Analysis as utilised during the implementation of ERP projects. In the first instance, it ...
Discrimination of Allium headspace volatiles affected by variations in genotype growing environment and storage using an electronic noses

Abbey, Lord (2003)

Alliums are valued mainly for their unique organosulphur-derived flavours and aromas. Traditional sensory and analytical determinations of Allium quality are constrained by high cost, technical difficulties and, time and ...
Hydrocode modelling of water impact

De Vuyst, Tom (2003-03)

This thesis addresses the problem of hydrocode modelling of water impact. Two facets that are of importance when numerically modelling the impact of metallic structures on water are metal anisotropy and water behaviour ...
Manufacturing systems simulation using the principles of system dy

Oyarbide Zubillaga, A. (Cranfield University, 2003-11)

Manufacturing is the largest single contributor to the global economy. The evolution of consumer demands has pressurised companies into producing a larger variety of products, with improved specifications, reduced costs, ...
Machine vision and scientific imaging for autonomous air vehicles (UAV).

Jameson, Pierre-Daniel (Cranfield UniversitySATM, 2008-08)

This thesis outlines the necessary requirements to determine an Unmanned Aerial Vehicles (UAV’s) pose relative to a lead aircraft or target, thus enabling a UAV to successfully follow a lead aircraft or target. The use ...
Developing a conceptual framework for the field failure feedback process from service-to-design

Ajayi, M. O. (Cranfield University, 2009-07-01)

This thesis addresses the product field failure feedback process from service-to-design,for the purposes of product enhancement within the heating technology manufacturing industry. The research provides insights into ...
Techno-economic and environmental risk assessment of a turbo-electric distributed propulsion system on a blended wing body aircraft

Giakoumakis, Eleftherios (Cranfield University, 2014)

Constant rise of air traffic has caused the environmental impacts of aviation to be the subject of an unprecedented scrutiny. Organisations all over the world are setting targets for emission reductions that represent ...
Molecular Dynamics of Kapitza Resistance at the Solid-Liquid Interface of Nanofluidic Channels

Kio, Michael Tamuno Elekima (Cranfield University, 2014)

This project sought to study the heat transfer and Kapitza resistance of fluids across interfaces, nanopores and nanochannels with varying sti.ness constants, mass and energy intermolecular in- teraction strength of wall ...
Investigation of methods to manipulate geometry, microstructure and mechanical properties in titanium large scale Wire+Arc Additive Manufacturing

Martina, Filomeno (Cranfield University, 2014)

Wire+arc additive manufacturing is a technique suitable for the deposition of large components; a variety of materials can be processed, including titanium. For the alloy Ti{6Al{4V, an experimental model based on design ...
Optimal on-board / off-board partitioning of integrated vehicle health management system.

Sydor, Piotr (2014-04)

The research presented in this thesis is intended to investigate and develop method to address optimal on-board / off-board partitioning of Integrated Health Management (IVHM) System. The problem of optimal on-board / ...
Influence of Airport Factors and Mission Fuel Burn Optimised Aircraft Trajectories on Severity and Engine Life

Khani, Nqobile (Cranfield University, 2014-06-20)

The continuous growth of air transport has raised concerns about global aircraft fuel consumption, emissions and noise. Industry’s efforts have identified that to reduce future emissions and the impact of aircraft ...
Development of Polymeric Materials to Inhibit Bacterial Quorum Sensing

Cavaleiro, Eliana Marisa dos Santos (Cranfield University, 2014-07)

Bacterial infections are an increasing problem for human health. In fact, an increasing number of infections are caused by bacteria that are resistant to most antibiotics and their combinations. A new solution to fight ...
Glycaemic control: The role of nutritional intake, postprandial glycaemia, nutrition therapy adherence, and diabetes complications

Pinto, Ezequiel (Cranfield University, 2014-07-14)

This thesis analysed the associations between several clinical and psychometric variables that can determine glycaemic control: nutritional intake, barriers to nutrition therapy adherence, postprandial glycaemia, and ...
Robotic polishing of large optical components

Chen, Sulei (Cranfield University, 2014-08)

Lightweight space mirrors have been widely used in earth observation and astronomy applications. Many organizations and companies, such as NASA in America, ESA in Europe, SSTL in UK as well as CASC in China, have spent a ...
Develop a framework for engineering change management in an aircraft manufacturing company

Zhu, Lin (Cranfield University, 2014-08)

The purpose of this research project is to develop a framework for engineering change management (ECM) in an aircraft manufacturing company. ECM is vital for manufacturers to manage changes efficiently and effectively. ...
Optimisation of the VARTM process

Struzziero, Giacomo (Cranfield University, 2014-08)

This study focuses on the development of a multi-objective optimisation methodology for the vacuum assisted resin transfer moulding composite processing route. Simulations of the cure and filling stages of the process ...
On-board Visualisation of Machining Tool Paths Generated by Function Blocks

Qiao, Qi (Cranfield University, 2014-09)

A solution for visualising the tool path generated by a function block system is introduced in this research. It facilitates the real-time monitoring of the behaviour of function blocks running on-board a CNC controller, ...
Impact of aircraft systems within aircraft operation: A MEA trajectory optimisation study

Seresinhe, R. (Cranfield University, 2014-09)

Air transport has been a key component of the socio-economic globalisation. The ever increasing demand for air travel and air transport is a testament to the success of the aircraft. But this growing demand presents many ...
Function Block Based Real-Time Tool Path Optimisation

Guo, Xixuan (Cranfield University, 2014-09)

With the changing and increasingly more demanding global markets, also Computer Aided Process Planning (CAPP) gets challenged. Industry is expecting more adaptive, dynamic, intelligent CAPP systems to deal with the uncertainty ...
Investigation of a ceramic metal matrix composite functional surface layer manufactured using gas tungsten arc welding

Herbst, Stephan (Cranfield University, 2014-09)

Wear resistant surfaces with high toughness and impact resistant properties are to be created to improve the life cycle cost of brake discs for trains. A potential solution to this industrial problem is to use an arc ...

Browsing PhD and MSc by research theses (SATM) by Publication Date

Browsing PhD and MSc by research theses (SATM) by Publication Date

Search CERES

Browse

All of CERES

This Collection

My Account