Browsing Staff publications (SATM) by Title

Browsing Staff publications (SATM) by Title

Sort by: Order: Results:

  • A3 thinking approach to support knowledge-driven design 
    Mohd Saad, Norhairin; Al-Ashaab, Ahmed; Maksimovic, Maksim; Zhu, L.; Shehab, Essam; Ewers, P.; Kassam, A. (Springer, 2013-03-01)
    Problem solving is a crucial skill in product development. Any lack of effective decision making at an early design stage will affect productivity and increase costs and the lead time for the other stages of the product ...
  • Abating CO2 and non-CO2 emissions with hydrogen propulsion 
    Mourouzidis, Christos; Singh, G.; Sun, X.; Huete, Jon; Nalianda, Devaiah; Nikolaidis, Theoklis; Sethi, Vishal; Rolt, Andrew Martin; Goodger, E.; Pilidis, Pericles (Cambridge University Press (CUP), 2024-04-02)
    This contribution focuses on the abatement with hydrogen of CO2 and non-CO2 emissions. It is agenda-setting in two respects. Firstly, it challenges the globally accepted hydrocarbon sustainable aviation fuel (SAF) pathway ...
  • Abnormal grain growth in ultrafine grained Ni under high-cycle loading 
    Barrios, Alejandro; Zhang, Yin; Maeder, Xavier; Castelluccio, Gustavo M.; Pierron, Olivier; Zhu, Ting (Elsevier, 2021-11-02)
    Abnormal grain growth can occur in polycrystalline materials with only a fraction of grains growing drastically to consume other grains. Here we report abnormal grain growth in ultrafine grained metal in a rarely explored ...
  • Abrupt fault detection and isolation for gas turbine components based on a 1D convolutional neural network using time series data 
    Zhao, Junjie; Li, Yiguang (AIAA, 2020-08-17)
    The FDI step identifies the presence of a fault, its level, type, and possible location. Gas turbine gas-path fault detection and isolation can improve the availability and economy of gas turbine components. Data-driven ...
  • Absolute angle measurement using dual-wavelength laser speckle: theory and method 
    Gibson, Sam J.; Charrett, Thomas O. H.; Tatam, Ralph P. (Elsevier, 2023-11-30)
    This paper presents a method utilising the speckle pattern formed by dual-wavelength illumination for the measurement of the two out-of-plane surface angles with respect to the sensor frame. Theoretical expressions are ...
  • An academic review: applications of data mining techniques in finance industry 
    Jadhav, Swati; He, Hongmei; Jenkins, Karl W. (2017-05-31)
    With the development of Internet techniques, data volumes are doubling every two years, faster than predicted by Moore’s Law. Big Data Analytics becomes particularly important for enterprise business. Modern computational ...
  • Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: A review of scientific challenges 
    Mgbemena, Chinedum Ogonna; Li, Danning; Lin, Meng-Fang; Liddel, Paul Daniel; Katnam, Kali Babu; Kumar, Vijay Thakur; Nezhad, Hamed Yazdani (Elsevier, 2018-09-12)
    Accelerated curing of high performance fibre-reinforced polymer (FRP) composites via microwave heating or radiation, which can significantly reduce cure time and increase energy efficiency, has several major challenges ...
  • An accelerometer based-feedback technique for improving dynamic performance of a machine tool 
    Abir, Jonathan; Morantz, Paul; Longo, Stefano; Shore, Paul (European Society for Precision Engineering and Nanotechnology, 2016-06-30)
    A novel concept for improving machine dynamic performance was developed and realised, a virtual metrology frame, for a small size CNC machine with flexible frame. Its implementation in a simplified linear motion system ...
  • Accident proneness of bus drivers; controlling for exposure 
    Dorn, Lisa; af Wåhlberg, Anders E. (Taylor and Francis, 2020-04-19)
    It is argued that the reason that previous evidence apparently did not support the accident proneness hypothesis was faulty methodology and erroneous interpretations of results. Between time periods correlations of traffic ...
  • Accommodating repair actions into gas turbine prognostics 
    Skaf, Zakwan; Zaidan, Martha A.; Harrison, Robert F.; Mills, Andrew R. (PHM Society, 2013-10-08)
    Elements of gas turbine degradation, such as compressor fouling, are recoverable through maintenance actions like compressor washing. These actions increase the usable engine life and optimise the performance of the gas ...
  • Accounting for environmental conditions in data-driven wind turbine power models 
    Pandit, Ravi; Infield, David; Santos, Matilde (IEEE, 2022-09-05)
    Continuous assessment of wind turbine performance is a key to maximising power generation at a very low cost. A wind turbine power curve is a non-linear function between power output and wind speed and is widely used to ...
  • The accuracy and computational efficiency of the Loewner framework for the system identification of mechanical systems 
    Dessena, Gabriele; Civera, Marco; Ignatyev, Dmitry; Whidborne, James F.; Zanotti Fragonara, Luca; Chiaia, Bernardino (MDPI, 2023-06-20)
    The Loewner framework has recently been proposed for the system identification of mechanical systems, mitigating the limitations of current frequency domain fitting processes for the extraction of modal parameters. In this ...
  • Accuracy versus simplicity in online battery model identification 
    Fotouhi, Abbas; Auger, Daniel J.; Propp, Karsten; Longo, Stefano (IEEE, 2016-09-22)
    This paper presents a framework for battery modeling in online, real-time applications where accuracy is important but speed is the key. The framework allows users to select model structures with the smallest number of ...
  • Achieving rotorcraft noise and emissions reduction for 'Clean Sky' - The measurement of success 
    Smith, Chrissy; Pachidis, Vassilios; Castillo Pardo, Alejandro; Gires, Ezanee; Stevens, Jos; Thevenot, Laurent; d'Ippolito, Roberto (2015-12-31)
    This paper describes the work done and strong interaction between Cranfield University as member of the Technology Evaluator (TE) team , Green Rotorcraft (GRC) Integrated Technology Demonstrator (ITD) ...
  • Acoustic monitoring of an aircraft auxiliary power unit 
    Ahmed, Umair; Ali, Fakhre; Jennions, Ian (Elsevier, 2023-01-13)
    In this paper, the development and implementation of a novel approach for fault detection of an aircraft auxiliary power unit (APU) has been demonstrated. The developed approach aims to target the proactive identification ...
  • The activated failures of human-automation interactions on the flight deck 
    Li, Wen-Chin; Greaves, Matthew J.; Durando, D.; Lin, J.J. (Aeronautical and Astronautical Society of the Republic of China, 2016-09-01)
    Cockpit automation has been developed to reduce pilots' workload and increase pilots' performance. However, previous studies have demonstrated that failures of automated systems have significantly impaired pilots' situational ...
  • Active gyroscopic stabilizer to mitigate vibration in a multimegawatt wind turbine 
    Soleymani, Mehdi; Norouzi, Mahdi (Wiley, 2020-12-16)
    One of the main concerns in developing large wind turbines, especially offshore, is their cost‐effectiveness versus traditional power sources. Significant dynamic loads are applied to the tower and the foundation of a ...
  • Active stall flutter suppression for a revised Leishman/Beddoes model 
    Zheng, Junruoyu; Pontillo, Alessandro; Chen, Lejun; Whidborne, James F. (American Society of Civil Engineers, 2023-12-25)
    This paper proposes a nonlinear disturbance observer (NDO) based sliding mode control (SMC) method to the problem of stall flutter suppression for a revised Leishman/Beddoes (L/B) model. To capture accurate aerodynamic ...
  • Actuator fault tolerant control of variable cycle engine using sliding mode control scheme 
    Yuan, Yuan; Zhang, Tianhong; Lin, Zhonglin; Zhao, Zhiwen; Zhang, Xinglong (MDPI, 2021-01-27)
    This paper presents a fault tolerant control (FTC) design for the actuator faults in a variable cycle engine (VCE). Ensured by the multiple variable geometries structure of VCE, the design is realized by distributing the ...
  • Adapting petri nets to DES: stochastic modelling of manufacturing systems 
    Simon, E.; Oyekan, John; Hutabarat, Windo; Tiwari, Ashutosh; Turner, Christopher J. (D A A A M International Vienna, 2018)
    Discrete-Event Simulation (DES) is commonly used for the simulation of manufacturing systems. In many practical cases, DES practitioners have to make simplifications or to use the software in an unconventional or convoluted ...

Search CERES


Browse

My Account