Part mass and shrinkage in micro injection moulding: statistical based optimisation using multiple quality criteria

Annicchiarico, Daniele; Attia, Usama M.; Alcock, Jeffrey R.

CERES Home
→
School of Applied Sciences (SAS) (2006-July 2014)
→
Staff publications (SAS)
→
View Item

dc.contributor.author	Annicchiarico, Daniele	-
dc.contributor.author	Attia, Usama M.	-
dc.contributor.author	Alcock, Jeffrey R.	-
dc.date.accessioned	2014-01-24T05:04:48Z
dc.date.available	2014-01-24T05:04:48Z
dc.date.issued	2013-09-30T00:00:00Z	-
dc.identifier.citation	D. Annicchiarico, U.M. Attia, J.R. Alcock, Part mass and shrinkage in micro injection moulding: statistical based optimisation using multiple quality criteria, Polymer Testing, Volume 32, Issue 6, 2013, Pages 1079-1087.
dc.identifier.issn	0142-9418	-
dc.identifier.uri	http://dx.doi.org/10.1016/j.polymertesting.2013.06.009	-
dc.identifier.uri	http://dspace.lib.cranfield.ac.uk/handle/1826/8149
dc.description.abstract	Purpose: The aim of this paper is to optimise process conditions in micro injection moulding (m-IM) to minimise shrinkage whilst maximising part mass. Method: A Design of Experiment (DoE) approach was implemented for studying the effect of five processing parameters on shrinkage and part mass. A multiple quality criteria based analysis was used to optimise the process. Results: Significant factors were found for shrinkage and part mass. Conclusions: The multi quality criteria could be optimized, and this optimization validated experimentally.	en_UK
dc.language.iso	en_UK	-
dc.publisher	Elsevier Science B.V., Amsterdam.	en_UK
dc.rights	NOTICE: this is the author’s version of a work that was accepted for publication in Polymer Testing. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Polymer Testing, VOL 32, ISSUE 6, (2013) DOI: 10.1016/j.polymertesting.2013.06.009
dc.subject	Part mass Shrinkage Micro injection moulding Optimization Multiple quality criteria	en_UK
dc.title	Part mass and shrinkage in micro injection moulding: statistical based optimisation using multiple quality criteria	en_UK
dc.type	Article	-