CERES Home
→
Cranfield Conferences and Symposia
→
Browsing Cranfield Conferences and Symposia by Title

Browsing Cranfield Conferences and Symposia by Title

Now showing items 99-118 of 286

European-wide Formation and Certification for the Competitive Edge in Integrated Design

Riel, A.; Tichkiewitch, S.; Messnarz, R. (Cranfield University Press, 2009-03-31)

Competitive Product Design is more and more linked to mastering the challenge of the complexity and multidisciplinary nature of modern products in an integrated fashion from the very earliest phases of product development. ...
Evaluation of “Design Loops” to Support the Design of Product Service Systems: A Case Study of a Helium Liquefier

Maussang, N.; Zwolinski, P.; Brissaud, D. (Cranfield University Press, 2009-04-01)

In this paper a specific evaluation for the PSS during the early design phase is presented, taking into account:  the scenarios that supports the definition of the architecture of the whole system and the interactions between ...
Experiences with BIOFOR reactors at Veas, Norway

Sagberg, Paul; Grundness Berg, Kirsti (of Water Sciences, Cranfield University, 1996-06-12)

Both the local situation in the inner Oslofiord and the political decisions of the countries surrounding the North Sea called for further treatment. Through 1989 and 1990, VEAS put bits and pieces of known technology ...
Experiences with Biological Aerated Filters for treatment of settles sewage and dairy effluent

Rundle, Howard (School of Water Sciences, Cranfield University, 1996-06-12)

Two plants are described which are designed for partial (or roughing) treatment of settled sewage, and settled sewage with dairy waste, and some of the lessons learned from these are described. These plants are ColOX ...
Experimental and numerical study on scratching test

Öpöz, Tahsin; Chen, Xun (Cranfield University Press, 2013-09-19)

This paper presents recent investigation of the material removal mechanism in single grit grinding test. Single grit scratches were generated experimentally by using CBN grit on En24T steel and compared with numerical ...
Experimental spaces for the introduction of disruptive technologies in production

Papenberga, Björn; Hogrevea, Sebastian; Trachta, Kirsten (Cranfield University, 2022-11-08)

The introduction of disruptive technologies such as artificial intelligence (AI) in the manufacturing industry poses challenges in terms of the subsequent use by employees. When introducing such technologies in the ...
Exploiting supplier capabilities to maximise product design opportunities in the fuzzy front end activities

Bolton, Simon; Brun, Alessandro; Pero, Margherita; Piaggesi, Pierluigi (Cranfield University Press, 2013-09-19)

This paper explores the Fuzzy Front-End (FFE), i.e. the first phase of the Product Design and Development process where a company formulates a product concept to be developed and decides whether or not to invest resources ...
Fabrication of binder-free ultrafine WC-6CO composites by coupled multi-physical fields activation technology

Huang, Kunlan; Qin, Yi; Yin, Deqiang; Yang, Yi; Yang, Gang (Cranfield University Press, 2013-09-19)

A novel sintering method, named as coupled multi-physical fields activation technology, has been introduced for the forming of various material powder systems. Compared with the conventional ones, this technique presents ...
Factors influences ISO9000 implementation in saudi manufacturing industry

Albadran, Abdullah; Tan, John; Cheung, Wai (Cranfield University Press, 2013-09-19)

This paper reports the preliminary findings for a PhD study. A review of literature found a lack of empirical research on factors that affect the implementation of ISO 9000 (a family of quality management standards) in ...
Factory modelling: data guidance for analysing production, utility and building architecture systems

Davé, Aanand; Ball, Peter D. (Cranfield University Press, 2013-09-19)

Work on energy and resource reduction in factories is dependent on the availability of data. Typically, available sources are incomplete or inappropriate for direct use and manipulation is required. Identifying new improvement ...
Fighters pilot helmet design for 5th generation aircraft

McAndrew, Ian; Moran, Katherine; Little, Andrew (Cranfield University Press, 2013-09-19)

Fighter pilots’ helmets have become more complex and heavier resulting in long term implications to pilots musculoskeletal systems as they fly and experience high g-load. Current research has identified design changes to ...
A framework for constructing a common knowledge base for human-machine system to perform maintenance tasks

Deng, Haoxuan; Khan, Samir; Erkoyuncu, John Ahmet (Cranfield University, 2022-11-08)

A reliable and comprehensive maintenance is important to promise the system running in a normal state, but it is skill-intensive and heavily dependent on human labor. With the development of predictive maintenance in ...
A Framework for Cross Disciplinary Efforts in Services Research

Wild, P. J.; Clarkson, P. J.; McFarlane, D. C. (Cranfield University Press, 2009-04-01)

Interdisciplinary Services research programmes commonly entail an integrative goal, that is, to integrate theory & findings from the multiple disciplines involved. Services research has been frequently described as existing ...
A framework for identifying uncertainties in long-term digital preservation

Shehab, Essam; Chuku, Glory; Badawy, Mohamed (Cranfield University Press, 2013-09-19)

With the current expansion in digital information comes an increasing need to preserve such assets. The ENSURE (Enabling knowledge Sustainability, Usability and Recovery for Economic value) pro-ject, a research project ...
Framework for the Integration of Service and Technology Strategies

Jühling, E.; Torney, M.; Herrmann, C.; Dröder, K. (Cranfield University Press, 2009-04-01)

After sales service is a highly profitable business for manufacturers of technology-driven products. Due to this fact competitors want to share in high profit margins. At the same time after sales business has to deal with ...
A framework of industrial sustainability good practices

Al-Ashaab, Ahmed; Flores, Myrna; Hernando Anta, Pablo; Varro, Brigitta (Cranfield University Press, 2013-09-19)

Global environmental problems, energy and raw material prices as well as their availability, increasingly demanding legislation and environmental taxes are some of the reasons that drive the consideration of sustainability ...
Free singularity path planning of hybrid parallel robot

Rakhodaei, Hamid; Rastegarpanah, Alireza; Ding, Chengjian; Saadat, Mozafar (Cranfield University Press, 2013-09-19)

This paper presents a singularity-free path planning approach for a hybrid parallel robot. The hybrid robot is composed of two well-known parallel robots, a hexapod and a tripod, that are serially connected. In this paper ...
Function Orientation beyond Development – Use Cases in the Late Phases of the Product Life Cycle

Warkentin, A.; Gausemeier, J.; Herbst, J. (Cranfield University Press, 2009-03-31)

The importance of a function driven way of working in the field of Electric/Electronic-systems (E/E) is increasing. However, the existing methods are focusing on the development phase. In contrast to this, we performed a ...
A Generic Conceptual Model for Risk Analysis in a Multi-agent Based Collaborative Design Environment

Ruan, J.; Qin, S. F. (Cranfield University Press, 2009-03-31)

This paper presents a generic conceptual model of risk evaluation in order to manage the risk through related constraints and variables under a multi-agent collaborative design environment. Initially, a hierarchy constraint ...
A genetic algorithm approach to designing and modelling of a multi-functional fractal manufacturing layout

Aririguzo, Julian; Saad, Sameh; Nkwogu, Uche (Cranfield University Press, 2013-09-19)

A dynamic and optimal shop floor design, modelling and implementation is key to achieving successful Fractal Manufacturing System (FrMS). To build adaptive and fault-tolerant fractal layout, attention is paid to issues of ...

Browsing Cranfield Conferences and Symposia by Title

Browsing Cranfield Conferences and Symposia by Title

Search CERES

Browse

All of CERES

This Community

My Account