Browsing Staff publications (SAS) by Title

Browsing Staff publications (SAS) by Title

Sort by: Order: Results:

  • Kinetic study of adsorption and photo-decolorization of Reactive Red 198 on TiO2 surface 
    Dutta, S.; Parsons, Simon A.; Bhattacharjee, C.; Jarvis, Peter; Datta, S.; Bandyopadhyay, S. (Elsevier, 2009-12-15)
    Recycling and reuse of wastewater after purification will reduce the environmental pollution as well as fulfill the increasing demand of water. Adsorption-based water treatment process is very popular for dye-house wastewater ...
  • Kinetics of phase transformations in lead scandium tantalate thin films 
    Battat, J.; Huang, Zhaorong; Donohue, P. P.; Todd, M. A.; Whatmore, Roger W. (Taylor and Francis, 2004)
    The phase transformations from amorphous to pyrochlore to perovskite in lead scandium tantalate (PST) thin films during rapid thermal annealing process (RTA) have been studied. Volume fractions for pyrochlore and perovskite ...
  • Kinetics of Struvite Precipitation: Effect of the Magnesium Dose on Induction Times and Precipitation Rates 
    Le Corre, Kristell S.; Valsami-Jones, Eugenia; Hobbs, Phil; Parsons, Simon A. (Taylor & Francis, 2007-12-31)
    The presence of white deposits in specific areas of wastewater treatment plants is generally the consequence of the spontaneous formation of a mineral called struvite. Struvite forms when the levels of phosphate, ammonium ...
  • KM your way to CMMI 
    Dayan, Rony; Evans, Stephen (Emerald, 2006)
    The purpose of this paper is to describe two related fields – knowledge management (KM) and capability maturity model integrated (CMMISM) – and highlight their similarities.
  • Knowledge based environment to support product design validation 
    Al-Ashaab, Ahmed; Molyneaux, M.; Doultsinou, A.; Brunner, B.; Martínez, E.; Moliner, F.; Santamaría, V.; Tanjore, D.; Ewers, P.; Knight, G. (Elsevier Science B.V., Amsterdam., 2012-02-01)
    A knowledge-based environment to support product design validation of refresh projects (projects with minor changes in comparison with previous ones) has been developed. This was achieved by capturing the relation between ...
  • Lag phases in the adsorption of lysozyme to Si(Ti)O2 surfaces in the presence of sodium thiocyanate. Part I. Phenomenology. 
    Ball, Vincent; Lustig, Ariel; Ramsden, Jeremy J. (Royal Society of Chemistry, 1999)
    The adsorption kinetics of hen egg white lysozyme (HEWL) in the presence of NaSCN at pH 7.4 onto Si0.8Ti0.2O2 surfaces were measured by means of time-resolved optical waveguide lightmode spectroscopy (OWLS). The adsorption ...
  • Laminate composites with enhanced pyroelectric effects for energy harvesting 
    Chang, Harrison Hoon Seok; Huang, Zhaorong (Institute of Physics, 2010-06-30)
    A pyroelectric coefficient enhanced 2-2 connectivity laminate composites' energy harvesting credentials have been assessed. The use of the electrothermal coupling factor for laminate composites (k(Lam)(2)) for such an ...
  • Land as an Environmental Resource 
    Hart, Kaley; Allen, K.; Lindner, Marcus; Keenleyside, C.; Burgess, Paul J.; Eggers, J.; Buckwell, A. (2013-07-04)
    Report Prepared for DG Environment, Contract No ENV.B.1/ETU/2011/0029, Institute for European Environmental Policy, London. Land is a multifunctional resource and the amount available to be used for different purposes is ...
  • Laser transfer of sol-gel ferroelectric thin films using an ITO release layer 
    Bansal, A.; Hergert, R.; Dou, G.; Wright, Robert V.; Bhattacharyya, Debabrata; Kirby, Paul B.; Yeatman, E. M.; Holmes, A. S. (Elsevier Science B.V., Amsterdam., 2011-02-01)
    A new laser transfer process is reported which allows damage-free transfer of ferroelectric thin films from a growth substrate directly to a target substrate. The thin film ferroelectric material is deposited on a fused ...
  • Lean manufacturing for SMEs: Enabling rapid response to demand changes 
    Achanga, Pius Coxwell; Shehab, Essam; Roy, Rajkumar; Nelder, Geoff (2005-12-31)
    Small-to-medium-sized manufacturing enterprises (SMEs) make significant contributions to most national economies. In the UK for instance, SMEs account for up to 40% of gross domestic product (GDP) and 85% of newly created ...
  • Lean Product Development Performance Measurement Tool 
    Al-Ashaab, Ahmed; Petritsch, Christoph; Gourdin, Mathilde; Aliende, Usue Aliende; Andino, Alberto; Varro, Brigitta; Rigatti, Carlotta; Golob, Matic; Summers, Mark; El-Nounu, Abdulrahman; Kayani, Amir (2013-09-19)
    The need of applying lean thinking to product development is becoming a must for the organisations to success in the current industry. This paper presents a tool that helps to define the actual status of the organisations ...
  • The legal framework for offshore wind farms: A critical analysis of the consents process 
    Gibson, E; Howsam, Peter (Elsevier Science B.V., Amsterdam., 2010-08-31)
    The impact of the legal framework for the consents process on the rate of development of offshore wind farms in England, and the achievement of targets for renewable electricity generation have been reviewed. From the ...
  • Life extension techniques for aircraft structures-Extending durability and promoting damage tolerance through bonded crack retarders 
    Irving, Phil E.; Zhang, Xiang; Doucet, J.; Figueroa-Gordon, Douglas J.; Boscolo, M.; Heinimann, M.; Shepherd, G.; Fitzpatrick, M. E.; Liljedahl, D. (2011-12-31)
    This paper explores the viability of the bonded crack retarder concept as a device for life extension of damage tolerant aircraft structures. Fatigue crack growth behaviour in metallic substrates with bonded straps has ...
  • Life-cycle-Based (LCB) online acquisition framework for supporting Mass Customisation (MC) in practice. 
    Tang, S. J.; Tjahjono, Benny; Kay, John M. (2006-09-01)
    Mass Customisation (MC) has been perceived in many articles as a strategy of choice for any company. However, Mass Customisation (MC) can be easily discussed at a strategic level; but it is rather more complicated to ...
  • Light emitting devices based on nanostructured semiconductors 
    Gallardo, Diego E.; Bertoni, Cristina; Dunn, Steve (2005-07-01)
    Light emitting devices based on high-efficiency photoluminescence (PL) fluorescent nanocrystals have been investigated in terms of the generation of light from the structure using a variety of deposition methods. An ...
  • Limiting travel speed in additive layer manufacturing 
    Adebayo, Adeyinka; Mehnen, Jorn; Tonnellier, Xavier (2013-04-16)
    Wire and Arc Additive Manufacture (WAAM) is new approache to modern manufacturing. This technology has been gaining the interest of the research community due to its high deposition rate and efficiency. In Wire and Arc ...
  • Liquation and post-weld heat treatment cracking in Rene 80 laser repair welds 
    Rush, M. T.; Colegrove, Paul A.; Zhang, Z.; Broad, D. (Elsevier Science B.V., Amsterdam., 2012-01-31)
    An extensive experimental study on a nickel-based superalloy, Rene 80 using autogenous laser welding has been undertaken to determine the effect of the process parameters and weld bead geometry on cracking in the as-welded ...
  • Literature review on the potential effects of electromagnetic fields and subsea noise from marine renewable energy developments on Atlantic salmon, sea trout and European eel. Scottish Natural Heritage Commissioned Report 
    Gill, Andrew B.; Bartlett, Mark D. (2011-02-28)
    Background This report reviews the current state of knowledge with regard to the potential for three fish species of conservation importance, namely Atlantic salmon (Salmo salar), sea trout (Salmo trutta) and European eel ...
  • Low energy ballasted flotation 
    Jarvis, Peter; Buckingham, P.; Holden, B.; Jefferson, Bruce (Elsevier Science B.V., Amsterdam., 2009-08-01)
    A novel process which involves the replacement or supplementation of bubbles in the dissolved air flotation process with low density beads is presented. The work comprised a series of bench-scale flotation trials treating ...
  • Low fatigue lead zirconate titanate-based capacitors modified by manganese for nonvolatile memories 
    Zhang, Qi; Whatmore, Roger W. (Elsevier, 2004-06-15)
    We have investigated the effects of Mn doping on the ferroelectric properties of Pb(Zr0.3Ti0.7)O3 (PZT) thin films on substrates Pt/Ti/SiO2/Si. Small amount of Mn-doped (≤1 mol%) PZT (PMZT) showed almost no hysteretic ...

Search CERES


Browse

My Account