Browsing by Author "Shehab, Essam"

Browsing by Author "Shehab, Essam"

Sort by: Order: Results:

  • Benchmark pre-production practice in manufacturing engineering 
    Shehab, Essam; Rao, Yogeesh; Al-Ashaab, Ahmed; Beadle, Chris; Sarfraz, Shoaib (IOS Press, 2017-12-31)
    Prototyping stage is a very important phase of new product development, where many decisions need to be taken to get high quality, zero defect products at the right time with minimum cost. Therefore, any value added ...
  • Benefit realisation modelling for ERP systems using system dynamics 
    Badewi, Amgad; Shehab, Essam; Peppard, Joe (Cranfield University Press, 2013-09-19)
    Achieving success for ERP systems is not only concerned with deploying the technology on time and on budget but also concerned with the level of achieving targeted benefits from the system. This level of achieving targeted ...
  • Capturing the Industrial Requirements of Set-Based Design for the CONGA Framework 
    Al-Ashaab, Ahmed; Golob, Matic; Noriega, Paula; Torriani, Filippo; Alvarez, Pedro; Beltran, Ana; Busachi, Alessandro; Ex-Ignotis, Lambert; Rigatti, Carlotta; Sharma, Sanjiv (2013-09-19)
    The Configuration Optimisation of Next-Generation Aircraft (CONGA) is a proposed framework in a response to industrial need to enhance the aerospace capability in the UK. In order to successfully address this challenge, a ...
  • Challenges and benefits of digital workflow implementation in aerospace manufacturing engineering 
    Rojo Abollado, Jaime; Shehab, Essam; Bamforth, Philip (Elsevier, 2017-05-09)
    Companies who operate in highly regulated industries have further challenges to the usual competition, continuous cost reduction and product development challenges. To address these requirements companies optimise their ...
  • Challenges in cost analysis of innovative maintenance of distributed high-value assets 
    Kirkwood, Leigh; Shehab, Essam; Baguley, Paul; Amorim-Melo, P.; Durazo-Cardenas, Isidro (Elsevier, 2014-10-31)
    Condition monitoring is an increasingly important activity, but there is often little thought given to how a condition monitoring approach is going to impact the cost of operating a system. This paper seeks to detail the ...
  • Challenges in cost modelling of recycling carbon fiber composites 
    Shehab, Essam; Meiirbekov, Arshyn; Sarfraz, Shoaib (IOS, 2020-07-10)
    The use of carbon fiber composites (CFCs) has become broad in many industries due to its superior properties compared to conventional materials. However, the increased demand coupled with environmental regulations has led ...
  • Challenges of cloud technology in manufacturing environment 
    Yadekar, Yaser; Shehab, Essam; Mehnen, Jorn (Cranfield University Press, 2013-09-19)
    The rapid growth Information systems and advanced network technologies have significant impact on enterprises around the world. Enterprises are trying to gain competitive advantage in open global markets by using the latest ...
  • Challenges of digital twin in high value manufacturing 
    Singh, Sumit; Shehab, Essam; Higgins, Nigel; Fowler, Kevin; Tomiyama, Tetsuo; Fowler, Chris (SAE International, 2018-10-30)
    Digital Twin (DT) is a dynamic digital representation of a real-world asset, process or system. Industry 4.0 has recognised DT as the game changer for manufacturing industries in their digital transformation journey. DT ...
  • Challenges of lean thinking application in product-service system 
    Elnadi, Moustafa; Shehab, Essam; Peppard, Joe (Cranfield University Press, 2013-09-19)
    Lean thinking is claimed to be as important to services as it has been to manufacturing. However, there is yet a lack of empirical research examining the possibility of applying lean thinking in Product-Service System ...
  • Challenges of model-based definition for high-value manufacturing 
    Goher, Kamran; Shehab, Essam; Al-Ashaab, Ahmed (IOS, 2019-09-12)
    Manufacturing Industry is moving towards adoption of 3D models as the ultimate authoritative source for complete product definition replacing 2D drawings, which is called “Model-Based Definition”. Starting its journey from ...
  • Chapter 5: Comprehensive study on tool wear during machining of fiber-reinforced polymeric composites 
    Ismail, Sikiru Oluwarotimi; Sarfraz, Shoaib; Niamat, Misbah; Mia, Mozammel; Gupta, Munish Kumar; Pimenov, Danil Yu; Shehab, Essam (Springer, 2020-12-23)
    The use of fiber reinforced polymeric (FRP) composites has increased rapidly, especially in many manufacturing (aerospace, automobile and construction) industries. The machining of composite materials is an important ...
  • Comparison of the environmental impact of the CRIMSON process with normal sand casting process 
    Zeng, Binxu; Salonitis, Konstantinos; Jolly, Mark R. (2013-09-02)
    The CRIMSON process is an alternative process to conventional casting that can be used for small to medium batch sizes. The aim of this process are to improve the casting quality and reduce the energy consumption within ...
  • The Conceptual LeanPPD Model 
    Al-Ashaab, Ahmed; Shehab, Essam; Alam, Rahman; Sopelanad, Amaia; Sorli, Mikel; Flores, Myrna; Taisch, Marco; Stokic, Dragan; James-Moore, Mike (2012-06-30)
    This paper is presenting the conceptual Lean Product and Process Development (LeanPPD) model which is a project funded by the EU-PF7. The project is addressing the needs of European manufacturing companies of a new model ...
  • A conceptual model for evaluating product-service systems leanness in UK manufacturing companies 
    Elnadi, M.; Shehab, Essam (Elsevier, 2014-10-31)
    The purpose of this paper is to present a conceptual model that can be used in measuring the degree of Product-Service System (PSS) leanness in UK manufacturing companies. The model will assess Product-Service System ...
  • The construction of a model for lean product development 
    Khan, Muhammad Sharjeel (Cranfield University, 2012-08)
    ‘Lean’ or ‘lean thinking’ refers to an improvement philosophy which focuses on the fulfilment of customer value and the reduction of waste. This philosophy is credited with the extraordinary rise of Toyota, one of the ...
  • Cost drivers of integrated maintenance in high-value systems 
    Amorim-Melo, P.; Shehab, Essam; Kirkwood, Leigh; Baguley, Paul (Elsevier, 2014-10-31)
    High value systems are determined by a wide structure, where operations are considered to be one structural component. Nowadays “down-time” as a major impact in the operation costs of any system. To avoid or minimize ...
  • A cost engine system for estimating whole-life cycle cost of long-term digital preservation activities 
    Sanya, Isaac; Shehab, Essam; Badawy, Mohamed (Cranfield University Press, 2013-09-19)
    This research paper presents a cost engine system that estimates the whole life cycle cost of long-term digital preservation (LTDP) activities using cloud-based technologies. A qualitative research methodology has been ...
  • A cost estimating framework for electronic, electrical and electromechanical (EEE) components obsolescence within the use-oriented product-service systems contracts 
    Romero Rojo, Francisco Javier; Roy, Rajkumar; Shehab, Essam; Cheruvu, Kalyan; Mason, Phil (Professional Engineering Publishing, 2012-01-31)
    This paper provides a cost estimating framework for electrical, electronic and electromechanical (EEE) components obsolescence, which represents the main source of obsolescence issues, owing to the increasingly short life ...
  • Cost modelling for cloud computing utilisation in long term digital preservation 
    Shehab, Essam; Sanya, Isaac; Badawy, Mohamed; Ocal, Fatma; Namiesnik, Bartosz; Morineau, Julien; Odika, Stephen; Fernandez Ortiz, Zaira (Cranfield University Press, 2013-09-19)
    The rapid increase in volume of digital information can cause concern among organisations regarding manageability, costs and security of their information in the long-term. As cloud computing technology is often used for ...
  • Cost modelling for manufacturing of aerospace composites 
    Ma, Weitao (Cranfield University, 2011-01)
    The application of composites has been increasing dramatically in aerospace structures recently, for example, composites have contributed over 50 percent of the structure mass of large transport airplanes Boeing 787 and ...