Browsing by Author "Shehab, Essam"

Browsing by Author "Shehab, Essam"

Sort by: Order: Results:

  • A3 thinking approach to support knowledge-driven design 
    Mohd Saad, Norhairin; Al-Ashaab, Ahmed; Maksimovic, Maksim; Zhu, L.; Shehab, Essam; Ewers, P.; Kassam, A. (Springer, 2013-03-01)
    Problem solving is a crucial skill in product development. Any lack of effective decision making at an early design stage will affect productivity and increase costs and the lead time for the other stages of the product ...
  • A3 thinking approach to support lean product and process development 
    Mohd Saad, Norhairin (Cranfield University, 2013-03)
    This research project aims to develop a novel A3 thinking approach to support knowledge driven design that aids the generation of decision making within a Lean Product and Process Development (LeanPPD) environment. This ...
  • Advances in Manufacturing Technology XXVII: Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013) 
    Shehab, Essam; Ball, Peter D.; Tjahjono, Benny (Cranfield University, 2013-09-19)
    ICMR2013 was organised by Cranfield University on the 19-20 September 2013. The conference focuses on any aspects of product development, manufacturing technology, manufacturing systems, information systems and digital ...
  • An aerospace requirements setting model to improve system design 
    Tomas Centrich, X.; Shehab, Essam; Sydor, Piotr; Mackley, Tim; John, Philip; Harrison, A. (Elsevier, 2014-10-31)
    Decisions at an early conceptual stage of the product lifecycle, are made with relatively low confidence, but such decisions greatly influence the overall product and service development. It is, therefore, critical to ...
  • Affordability Assessment of Industrial Product-Service System in the Aerospace Defence Industry 
    Bankole, O. O.; Roy, Rajkumar; Shehab, Essam; Wardle, P. (Cranfield University Press, 2009-04-01)
    The Industrial Product-Service System (IPS2) takes a whole life cycle view in order to consider the total cost of the IPS2 offering. This paper focuses on the concept of customer affordability which aims to review current ...
  • An approach for selecting cost estimation techniques for innovative high value manufacturing products 
    Schwabe, Oliver; Shehab, Essam; Erkoyuncu, John Ahmet (Elsevier, 2016-11-02)
    This paper presents an approach for determining the most appropriate technique for cost estimation of innovative high value manufacturing products depending on the amount of prior data available. Case study data from the ...
  • An autonomous system for maintenance scheduling data-rich complex infrastructure: Fusing the railways' condition, planning and cost 
    Durazo-Cardenas, Isidro; Starr, Andrew; Turner, Christopher J.; Tiwari, Ashutosh; Kirkwood, Leigh; Bevilacqua, Maurizio; Tsourdos, Antonios; Shehab, Essam; Baguley, Paul; Xu, Yuchun (Elsevier, 2018-02-22)
    National railways are typically large and complex systems. Their network infrastructure usually includes extended track sections, bridges, stations and other supporting assets. In recent years, railways have also become a ...
  • Benchmark pre-production practice in manufacturing engineering 
    Shehab, Essam; Rao, Yogeesh; Al-Ashaab, Ahmed; Beadle, Chris; Sarfraz, Shoaib (IOS Press, 2017-12-31)
    Prototyping stage is a very important phase of new product development, where many decisions need to be taken to get high quality, zero defect products at the right time with minimum cost. Therefore, any value added ...
  • Benefit realisation modelling for ERP systems using system dynamics 
    Badewi, Amgad; Shehab, Essam; Peppard, Joe (Cranfield University Press, 2013-09-19)
    Achieving success for ERP systems is not only concerned with deploying the technology on time and on budget but also concerned with the level of achieving targeted benefits from the system. This level of achieving targeted ...
  • Capturing the Industrial Requirements of Set-Based Design for the CONGA Framework 
    Al-Ashaab, Ahmed; Golob, Matic; Noriega, Paula; Torriani, Filippo; Alvarez, Pedro; Beltran, Ana; Busachi, Alessandro; Ex-Ignotis, Lambert; Rigatti, Carlotta; Sharma, Sanjiv (2013-09-19)
    The Configuration Optimisation of Next-Generation Aircraft (CONGA) is a proposed framework in a response to industrial need to enhance the aerospace capability in the UK. In order to successfully address this challenge, a ...
  • Challenges and benefits of digital workflow implementation in aerospace manufacturing engineering 
    Rojo Abollado, Jaime; Shehab, Essam; Bamforth, Philip (Elsevier, 2017-05-09)
    Companies who operate in highly regulated industries have further challenges to the usual competition, continuous cost reduction and product development challenges. To address these requirements companies optimise their ...
  • Challenges in cost analysis of innovative maintenance of distributed high-value assets 
    Kirkwood, Leigh; Shehab, Essam; Baguley, Paul; Amorim-Melo, P.; Durazo-Cardenas, Isidro (Elsevier, 2014-10-31)
    Condition monitoring is an increasingly important activity, but there is often little thought given to how a condition monitoring approach is going to impact the cost of operating a system. This paper seeks to detail the ...
  • Challenges in cost modelling of recycling carbon fiber composites 
    Shehab, Essam; Meiirbekov, Arshyn; Sarfraz, Shoaib (IOS, 2020-07-10)
    The use of carbon fiber composites (CFCs) has become broad in many industries due to its superior properties compared to conventional materials. However, the increased demand coupled with environmental regulations has led ...
  • Challenges of cloud technology in manufacturing environment 
    Yadekar, Yaser; Shehab, Essam; Mehnen, Jorn (Cranfield University Press, 2013-09-19)
    The rapid growth Information systems and advanced network technologies have significant impact on enterprises around the world. Enterprises are trying to gain competitive advantage in open global markets by using the latest ...
  • Challenges of digital twin in high value manufacturing 
    Singh, Sumit; Shehab, Essam; Higgins, Nigel; Fowler, Kevin; Tomiyama, Tetsuo; Fowler, Chris (SAE International, 2018-10-30)
    Digital Twin (DT) is a dynamic digital representation of a real-world asset, process or system. Industry 4.0 has recognised DT as the game changer for manufacturing industries in their digital transformation journey. DT ...
  • Challenges of lean thinking application in product-service system 
    Elnadi, Moustafa; Shehab, Essam; Peppard, Joe (Cranfield University Press, 2013-09-19)
    Lean thinking is claimed to be as important to services as it has been to manufacturing. However, there is yet a lack of empirical research examining the possibility of applying lean thinking in Product-Service System ...
  • Challenges of model-based definition for high-value manufacturing 
    Goher, Kamran; Shehab, Essam; Al-Ashaab, Ahmed (IOS, 2019-09-12)
    Manufacturing Industry is moving towards adoption of 3D models as the ultimate authoritative source for complete product definition replacing 2D drawings, which is called “Model-Based Definition”. Starting its journey from ...
  • Chapter 5: Comprehensive study on tool wear during machining of fiber-reinforced polymeric composites 
    Ismail, Sikiru Oluwarotimi; Sarfraz, Shoaib; Niamat, Misbah; Mia, Mozammel; Gupta, Munish Kumar; Pimenov, Danil Yu; Shehab, Essam (Springer, 2020-12-23)
    The use of fiber reinforced polymeric (FRP) composites has increased rapidly, especially in many manufacturing (aerospace, automobile and construction) industries. The machining of composite materials is an important ...
  • Comparison of the environmental impact of the CRIMSON process with normal sand casting process 
    Zeng, Binxu; Salonitis, Konstantinos; Jolly, Mark R. (2013-09-02)
    The CRIMSON process is an alternative process to conventional casting that can be used for small to medium batch sizes. The aim of this process are to improve the casting quality and reduce the energy consumption within ...
  • The Conceptual LeanPPD Model 
    Al-Ashaab, Ahmed; Shehab, Essam; Alam, Rahman; Sopelanad, Amaia; Sorli, Mikel; Flores, Myrna; Taisch, Marco; Stokic, Dragan; James-Moore, Mike (2012-06-30)
    This paper is presenting the conceptual Lean Product and Process Development (LeanPPD) model which is a project funded by the EU-PF7. The project is addressing the needs of European manufacturing companies of a new model ...