Browsing by Title

Browsing by Title

Sort by: Order: Results:

  • 5G aviation networks using novel AI approach for DDoS detection 
    Whitworth, Huw; Al-Rubaye, Saba; Tsourdos, Antonios; Jiggins, Julia (IEEE, 2023-07-17)
    The advent of Fifth Generation (5G) technology has ushered in a new era of advancements in the aviation sector. However, the introduction of smart infrastructure has significantly altered the threat landscape at airports, ...
  • 6 Shipwreck archaeology in the past 10 years 
    Briggs, Lisa; Campbell, Peter B. (Cambridge University Press (CUP), 2023-12-08)
    This paper reviews the trends, topics, and research directions in shipwreck archaeology over the past decade. As archaeology increasingly embraces advances in technological methods that can aid our research, the so-called ...
  • 6U CubeSat design for Earth observation with 6.5m GSD, five spectral bands and 14Mbps downlink 
    Tsitas, S. R.; Kingston, Jennifer (Royal Aeronautical Society, 2010-11-30)
    The design of a 6U Cube Sat including spacecraft systems and imagine payload is described for an Earth observation mission. From a Sun synchronous orbit at an altitude of 600km the design enables imaging with a 6.5m GSD, ...
  • A3 thinking approach to enhance a complaints handling process in the airline sector 
    Alshahrani, Bader Mohammed (Cranfield UniversitySATM, 2019-07)
    A prescription for the business success is a matter of concern for company management, researchers and policy makers. There is an ongoing debate regarding the key tools which can increase business efficiency. For example, ...
  • A3 thinking approach to support knowledge-driven design 
    Mohd Saad, Norhairin; Al-Ashaab, Ahmed; Maksimovic, Maksim; Zhu, L.; Shehab, Essam; Ewers, P.; Kassam, A. (Springer, 2013-03-01)
    Problem solving is a crucial skill in product development. Any lack of effective decision making at an early design stage will affect productivity and increase costs and the lead time for the other stages of the product ...
  • A3 thinking approach to support lean product and process development 
    Mohd Saad, Norhairin (Cranfield University, 2013-03)
    This research project aims to develop a novel A3 thinking approach to support knowledge driven design that aids the generation of decision making within a Lean Product and Process Development (LeanPPD) environment. This ...
  • Abating CO2 and non-CO2 emissions with hydrogen propulsion 
    Mourouzidis, Christos; Singh, G.; Sun, X.; Huete, Jon; Nalianda, Devaiah; Nikolaidis, Theoklis; Sethi, Vishal; Rolt, Andrew Martin; Goodger, E.; Pilidis, Pericles (Cambridge University Press (CUP), 2024-04-02)
    This contribution focuses on the abatement with hydrogen of CO2 and non-CO2 emissions. It is agenda-setting in two respects. Firstly, it challenges the globally accepted hydrocarbon sustainable aviation fuel (SAF) pathway ...
  • Ablation studies of low melting point bodies in a pre-heated supersonic air stream 
    Cleaver, J. W. (College of Aeronautics, 1960-02)
    This report is an investigation into the melting of axi-symmetric and two-dimensional bogies at a Mach No. of M[infinity] = 1.78 and stagnation temperatures up to 550 [degrees]K. In this temperature range, the most ...
  • Abnormal grain growth in ultrafine grained Ni under high-cycle loading 
    Barrios, Alejandro; Zhang, Yin; Maeder, Xavier; Castelluccio, Gustavo M.; Pierron, Olivier; Zhu, Ting (Elsevier, 2021-11-02)
    Abnormal grain growth can occur in polycrystalline materials with only a fraction of grains growing drastically to consume other grains. Here we report abnormal grain growth in ultrafine grained metal in a rarely explored ...
  • Abradable stator gas turbine labyrinth seals 
    Allcock, D. C. J. (Cranfield University, 1999-03)
    This is a detailed study into the internal aerodynamics of labyrinth seals, with pmic| reference to the effects of abradable honeycomb stators on labyrinth seal leakage.- A extensive experimental programme established ...
  • Abrasive machining with MQSL. 
    Morris, Tom (Cranfield University, 2011-07)
    Grinding and polishing of engineered components are critical aspects of the precision manufacturing of high performance, quality assured products. Elevated process temperatures, however, are a common and for the most ...
  • Abrupt fault detection and isolation for gas turbine components based on a 1D convolutional neural network using time series data 
    Zhao, Junjie; Li, Yiguang (AIAA, 2020-08-17)
    The FDI step identifies the presence of a fault, its level, type, and possible location. Gas turbine gas-path fault detection and isolation can improve the availability and economy of gas turbine components. Data-driven ...
  • Abscisic acid acts essentially on stomata, not on xylem, to improve drought resistance in tomato 
    Haverroth, Eduardo J.; Oliveira, Leonardo A.; Andrade, Moab T.; Taggart, Matthew; McAdam, Scott A. M.; Zsögön, Agustin; Thompson, Andrew J.; Martins, Samuel C. V.; Cardoso, Amanda A. (Wiley, 2023-08-01)
    Drought resistance is essential for plant production under water-limiting environments. Abscisic acid (ABA) plays a critical role in stomata but its impact on hydraulic function beyond the stomata is far less studied. We ...
  • Absence behavior as traffic crash predictor in bus drivers 
    af Wåhlberg, Anders E.; Dorn, Lisa (Elsevier Science B.V., Amsterdam., 2009-12-31)
    Problem: Various indicators of health have been shown to be associated with traffic crash involvement. As general health is also related to absence from work, the latter variable may be more strongly related to crashes, ...
  • The absence or presence of a lytic coliphage affects the response of Escherichia coli to heat, chlorine, or UV exposure 
    Ameh, Ekwu M.; Tyrrel, Sean; Harris, Jim A.; Ignatiou, Athanasios; Orlova, Elena; Nocker, Andreas (Springer, 2018-03-15)
    Disinfection aims at maximal inactivation of target organisms and the sustainable suppression of their regrowth. Whereas many disinfection efforts achieve efficient inactivation when the effect is measured directly after ...
  • Absolute angle measurement using dual-wavelength laser speckle: theory and method 
    Gibson, Sam J.; Charrett, Thomas O. H.; Tatam, Ralph P. (Elsevier, 2023-11-30)
    This paper presents a method utilising the speckle pattern formed by dual-wavelength illumination for the measurement of the two out-of-plane surface angles with respect to the sensor frame. Theoretical expressions are ...
  • An abstract of a paper by D. Battat 'a new kinetic approach to the shock wave structure' 
    Unknown author (College of Aeronautics, 1966)
  • Abundance and distribution of enteric bacteria and viruses in coastal and estuarine sediments - A review 
    Hassard, Francis; Gwyther, Ceri L.; Farkas, Kata; Andrews, Anthony; Jones, Vera; Cox, Brian; Howard, Brett; Jones, Davey L.; McDonald, James E.; Malham, Shelagh K. (Frontiers Media, 2016-11-01)
    The long term survival of fecal indicator organisms (FIOs) and human pathogenic microorganisms in sediments is important from a water quality, human health and ecological perspective. Typically, both bacteria and viruses ...
  • Academic entrepreneurs? 
    Birley, Sue; McMullen, Ed; Myers, Andrew (1989)
    Entrepreneurial education has exploded over the past ten years in both the United States and the United Kingdom. In the USA there are now more than 50 institutions seeking academics to fill endowed posts; in the UK, there ...
  • An academic review: applications of data mining techniques in finance industry 
    Jadhav, Swati; He, Hongmei; Jenkins, Karl W. (2017-05-31)
    With the development of Internet techniques, data volumes are doubling every two years, faster than predicted by Moore’s Law. Big Data Analytics becomes particularly important for enterprise business. Modern computational ...