Browsing by Author "Li, Lingzhen"

Now showing 1 - 1 of 1
  • Thumbnail Image
    ItemOpen Access
    Metal 3D-printing for repair of steel structures
    (Ernst & Sohn (Wiley), 2023-09-12) Ghafoori, Elyas; Dahaghin, Hamid; Diao, Chenglei; Pichler, Niels; Li, Lingzhen; Ding, Jialuo; Ganguly, Supriyo; Williams, Stewart
    This work employs an innovative technique, wire arc additive manufacturing (WAAM) which is a type of directed energy deposition, for fatigue strengthening of cracked steel components. Different steel plates with a central crack were tested under high-cycle fatigue loading regime, including a reference plate, a plate repaired by WAAM with as-deposited profile, and a plate repaired by WAAM and subsequently machined to reduce stress concentration factors. Corresponding finite element simulation was conducted to provide a better understanding on the mechanism of WAAM-repair. The existing central crack in the reference plate propagated and led to a rupture after 0.94 million cycles, while those in the two WAAM-repaired plates did not propagate, due to the increased net cross-section and the compressive stresses induced by the depositing process. However, in the second plate, a new crack initiated at the root of WAAM profile as a result of local stress concentration, and the fatigue life reached 2.2 million cycles (2.3 times as the reference plate). The third plate, on the other hand, survived more than 9 million fatigue cycles with no visible degradation, thanks to its smooth machined profile. The findings of this work indicate that WAAM repair shows great potential as a technique to address fatigue-related damages in steel structures.