Kinematic Simulation and Structure Analysis of a Morphing Flap

Date published

2013-12

Free to read from

Supervisor/s

Journal Title

Journal ISSN

Volume Title

Publisher

Cranfield University

Department

Type

Thesis or dissertation

ISSN

Format

Citation

Abstract

This thesis presents a study on the design and analysis of a morphing flap structure integrated with actuation mechanism for potential application to large aircraft. Unlike the conventional rigid flap mounted on the wing trailing edge, the morphing flap is designed as a unitized structural system integrated with three primary components: the upper and lower flexible skins reinforced by stringers, an eccentric beam actuation mechanism (EBAM) with discs fixed on it, and the connection of the discs with the stringers. Based on the EBAM concept proposed by Dr Guo in previous research [1], the current study has been focused on the EBAM design and optimization, kinematic simulation and structural modelling of the morphing flap. Although a lot of efforts have been made to develop the morphing flap in previous research, it is lack of detailed design of the disc-skin linkage and clear view on the mechanism optimization in relation to the shape requirement. The main objective of this research is to meet the morphing shape requirements and calculate the actuation torque for a specified morphing flap. Firstly effort was made to design and optimize the disc shape and locations in the EBAM for the best matching of the specified morphing shape with minimum actuation torque demand. It is found that minimum three discs are required and their locations have little effect on the actuation torque. Secondly attention was focused on designs of the disc and a C-linkage with the stringers. To ensure that the C- linkage works in practice, a twisted stringer flange design was proposed. Thirdly the actuation mechanism was integrated with the stiffened skin to play the role of an active rib in the flap structure. Based on the design, FE modelling and analysis of the morphing flap structure was carried out. The behaviour of the morphing flap under the internal actuation and external aerodynamic load was applied for stress analysis and detailed design of the structures. Finally the kinematics of the integrated morphing flap was simulated by using CATIA to demonstrate the feasibility and the effectiveness of the improved design.

Description

Software Description

Software Language

Github

Keywords

Morphing flap, Eccentric beam actuation mechanism, twisted disc, optimization, simulation

DOI

Rights

© Cranfield University 2013. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner.

Relationships

Relationships

Supplements

Funder/s