Test report no. PLBO/12: comparison of modified forms of PERPRO carbide grade TO 348 when machining EN 9
Date
1964-06
Free to read from
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
College of Aeronautics
Department
Type
Report
ISSN
Format
Citation
Abstract
Tools of TO 3)48/ RD60, RD61, RD62, RD63 and Standard were tested to 0.030 in. flankwear when machining EN 9 at 600 fpm with 0.010 in/rev. feed and 0.10 in. depth of cut. The results showed that while no one grade was outstanding RD61, RD62 and RD63 gave an all round better performance than the other two grades.