Surface integrity control of piezoelectric materials in ultra precision grinding on the basis of machine design assessment

Date published

2004-11

Free to read from

Authors

Journal Title

Journal ISSN

Volume Title

Publisher

Cranfield University

Department

Type

Thesis or dissertation

ISSN

Format

Citation

Abstract

The target of this research work was to establish a surface integrity control methodology in ultra precision grinding for piezoelectric materials, taking into account the interaction between the material removal manner and the machine design contributions. Whilst there are many respective research works concerning the microscopic material removal behavior on brittle materials and the design characterization of individual machine components, it was necessary to identify the design characteristics in order to ensure a consistent and fine surface integrity ( i.e. surface roughness, surface atness, textural damage ) in contact machining. For example, in a thermal analysis of a machine structure, the considerable inuences of internal and external heat sources were observed, which resulted in heat ows in aerostatic and hydrostatic components. After identifying several thermal error modes, a substantial improvement of thermal stability was applied successfully onto the machine structure. However, the major contributions arising from this research work are considered to be the following. ( i ) Suggestion of a method to achieve optimized grinding conditions for piezoelectric materials ( ii ) Identification of a link between material removal behavior and the machine design contribution (iii)Development of a novel tooling component

Following a static and dynamic assessment of three grinding machine structures, it was conciuded that an enhanced damping performance at the loop distance, between the grinding wheel and work tooling, is beneficial to obtain a fine surface finish together with a at surface, whereas past researchers have claimed that static stiffness and high resonant frequencies should be the prime aim.

Description

Software Description

Software Language

Github

Keywords

DOI

Rights

© Cranfield University, 2015. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder.

Relationships

Relationships

Supplements

Funder/s